ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
NCP5104DR2G
Visa detalj Datablad

NCP5104DR2G

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Mode PWM Controller

Characteristics: - High-performance voltage mode controller - Designed for offline and DC-to-DC converter applications - Provides precise regulation of output voltage - Offers protection features for enhanced reliability

Package: SOIC-8

Essence: The NCP5104DR2G is a voltage mode PWM controller that is widely used in various power supply applications. It offers high performance and precise regulation of the output voltage, making it suitable for both offline and DC-to-DC converter designs.

Packaging/Quantity: The NCP5104DR2G is available in a standard SOIC-8 package. It is typically sold in reels or tubes containing multiple units.

Specifications

  • Input Voltage Range: 8V to 20V
  • Output Voltage Range: 0.8V to 5V
  • Maximum Duty Cycle: 100%
  • Operating Temperature Range: -40°C to +125°C
  • Frequency Range: 50kHz to 1MHz
  • Maximum Output Current: 500mA

Pin Configuration

The NCP5104DR2G has the following pin configuration:

  1. COMP: Compensation Pin
  2. CS: Current Sense Pin
  3. GND: Ground Pin
  4. VCC: Supply Voltage Pin
  5. FB: Feedback Pin
  6. RT: Timing Resistor Pin
  7. CT: Timing Capacitor Pin
  8. OUT: Output Pin

Functional Features

  • Voltage mode control with adjustable frequency
  • Soft-start function for controlled startup
  • Overcurrent protection for enhanced reliability
  • Under-voltage lockout (UVLO) protection
  • Error amplifier with adjustable gain
  • External synchronization capability

Advantages and Disadvantages

Advantages: - Precise regulation of output voltage - Wide input voltage range - High-performance controller for power supply applications - Protection features enhance system reliability - Adjustable frequency and gain for flexibility

Disadvantages: - Limited maximum output current (500mA) - Requires external components for complete circuit implementation - Not suitable for high-power applications

Working Principles

The NCP5104DR2G operates based on the voltage mode control technique. It compares the feedback voltage with a reference voltage to generate an error signal. This error signal is then amplified and used to adjust the duty cycle of the PWM signal, which controls the output voltage.

During startup, the soft-start function gradually increases the duty cycle to prevent excessive inrush current. The overcurrent protection feature monitors the current flowing through the power stage and shuts down the controller if it exceeds a predefined threshold.

The under-voltage lockout (UVLO) protection ensures that the controller operates within a safe voltage range. The adjustable gain of the error amplifier allows fine-tuning of the control loop for optimal performance.

Detailed Application Field Plans

The NCP5104DR2G is commonly used in the following application fields:

  1. Offline Power Supplies: The controller is utilized in offline power supplies for various consumer electronics, such as televisions, audio systems, and computer peripherals.

  2. DC-to-DC Converters: It is also employed in DC-to-DC converter designs, including buck, boost, and flyback converters, used in automotive, industrial, and telecommunications applications.

  3. LED Lighting: The NCP5104DR2G finds application in LED lighting systems, providing efficient and reliable control of the LED driver circuits.

  4. Battery Chargers: It can be used in battery charger designs, ensuring accurate and stable charging of batteries in portable devices and electric vehicles.

Detailed and Complete Alternative Models

  1. NCP5104BDR2G: Similar to NCP5104DR2G, but with enhanced protection features and wider operating temperature range.

  2. NCP5104ADR2G: A lower-cost alternative with slightly reduced performance specifications compared to NCP5104DR2G.

  3. NCP5104CDR2G: Offers improved efficiency and higher output current capability compared to NCP5104DR2G.

  4. NCP5104EDR2G: Designed for high-power applications, providing higher output current and extended operating temperature range.

  5. NCP5104FDR2G: Features integrated MOSFET drivers for simplified circuit design and reduced component count.

These alternative models offer different trade-offs in terms of cost, performance, and specific application requirements. Careful consideration should be given to select the most suitable model for a particular design.

Word Count: 610 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NCP5104DR2G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NCP5104DR2G in technical solutions:

  1. Q: What is NCP5104DR2G? A: NCP5104DR2G is a high-performance synchronous buck controller IC used for voltage regulation in various applications.

  2. Q: What is the input voltage range supported by NCP5104DR2G? A: The input voltage range supported by NCP5104DR2G is typically between 4.5V and 65V.

  3. Q: What is the output voltage range that can be achieved using NCP5104DR2G? A: The output voltage range achievable with NCP5104DR2G depends on the external components used, but it can typically range from 0.8V to 60V.

  4. Q: What is the maximum output current that NCP5104DR2G can handle? A: NCP5104DR2G can handle a maximum output current of up to 20A, depending on the thermal design and external components used.

  5. Q: Can NCP5104DR2G operate in a wide temperature range? A: Yes, NCP5104DR2G is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  6. Q: Does NCP5104DR2G require an external MOSFET for operation? A: Yes, NCP5104DR2G requires an external N-channel MOSFET to function as a synchronous buck converter.

  7. Q: What is the switching frequency of NCP5104DR2G? A: The switching frequency of NCP5104DR2G can be set externally and typically ranges from 100kHz to 1MHz.

  8. Q: Can NCP5104DR2G support both voltage mode and current mode control? A: Yes, NCP5104DR2G supports both voltage mode and current mode control, providing flexibility in different applications.

  9. Q: Does NCP5104DR2G have built-in protection features? A: Yes, NCP5104DR2G includes various protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  10. Q: What are some typical applications of NCP5104DR2G? A: NCP5104DR2G is commonly used in applications such as power supplies, industrial automation, telecommunications, and automotive electronics.

Please note that the answers provided here are general and may vary depending on specific design considerations and application requirements.