ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
NCP2890DMR2G
Visa detalj Datablad

NCP2890DMR2G

Product Overview

Category: Integrated Circuit (IC)

Use: Audio Amplifier

Characteristics: - High efficiency - Low power consumption - Small form factor - Wide operating voltage range

Package: DFN-8 (Dual Flat No-Lead)

Essence: The NCP2890DMR2G is a high-efficiency audio amplifier IC designed for portable electronic devices.

Packaging/Quantity: The NCP2890DMR2G is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Supply Voltage Range: 2.5V to 5.5V
  • Output Power: Up to 1.2W
  • Efficiency: Up to 90%
  • Total Harmonic Distortion (THD): <1%
  • Shutdown Current: <1µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NCP2890DMR2G has the following pin configuration:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. SD: Shutdown control input
  4. IN+: Positive audio input
  5. IN-: Negative audio input
  6. OUT: Amplified audio output
  7. Bypass: Bypass capacitor connection
  8. BYP_GND: Bypass capacitor ground reference

Functional Features

  • Class AB amplifier architecture
  • Short-circuit and thermal protection
  • Pop and click noise suppression during power-on/off transitions
  • Low quiescent current in shutdown mode
  • Internal gain setting resistor

Advantages and Disadvantages

Advantages: - High efficiency leads to longer battery life in portable devices - Small form factor allows for compact designs - Wide operating voltage range enables compatibility with various power sources - Pop and click noise suppression enhances audio quality

Disadvantages: - Limited output power compared to higher wattage amplifiers - May require additional external components for specific applications

Working Principles

The NCP2890DMR2G is a class AB audio amplifier that utilizes a bridge-tied load (BTL) configuration. It amplifies the audio signal received at the input pins and delivers it to the output pin with high efficiency. The internal gain setting resistor allows for easy adjustment of the amplification level.

Detailed Application Field Plans

The NCP2890DMR2G is commonly used in various portable electronic devices, including:

  1. Smartphones and tablets
  2. Portable media players
  3. Bluetooth speakers
  4. Gaming consoles
  5. Wearable devices

Its small form factor, low power consumption, and high efficiency make it ideal for these applications, where space and battery life are crucial factors.

Detailed and Complete Alternative Models

  1. TPA3116D2: A higher wattage audio amplifier IC suitable for home audio systems.
  2. LM386: A low-cost audio amplifier IC commonly used in hobbyist projects.
  3. MAX98357A: An audio amplifier IC with integrated digital-to-analog converter (DAC) for enhanced audio quality.

These alternative models offer different features and specifications, catering to various application requirements.

Word count: 390 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NCP2890DMR2G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NCP2890DMR2G in technical solutions:

  1. Q: What is NCP2890DMR2G? A: NCP2890DMR2G is a voltage regulator IC designed for audio amplification applications.

  2. Q: What is the input voltage range of NCP2890DMR2G? A: The input voltage range of NCP2890DMR2G is typically between 2.7V and 5.5V.

  3. Q: What is the output power capability of NCP2890DMR2G? A: NCP2890DMR2G can deliver up to 1.4W of output power into an 8-ohm load.

  4. Q: Can NCP2890DMR2G operate with a single supply voltage? A: Yes, NCP2890DMR2G can operate with a single supply voltage, typically ranging from 2.7V to 5.5V.

  5. Q: Is NCP2890DMR2G suitable for battery-powered applications? A: Yes, NCP2890DMR2G is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  6. Q: Does NCP2890DMR2G have built-in thermal protection? A: Yes, NCP2890DMR2G has built-in thermal protection to prevent overheating and ensure safe operation.

  7. Q: Can NCP2890DMR2G be used in stereo audio applications? A: Yes, NCP2890DMR2G can be used in stereo audio applications by using two ICs, one for each channel.

  8. Q: What is the typical efficiency of NCP2890DMR2G? A: The typical efficiency of NCP2890DMR2G is around 85% at maximum output power.

  9. Q: Does NCP2890DMR2G require external components for operation? A: Yes, NCP2890DMR2G requires a few external components such as input and output capacitors, resistors, and inductors.

  10. Q: Is NCP2890DMR2G suitable for portable audio devices? A: Yes, NCP2890DMR2G is suitable for portable audio devices due to its small package size, low power consumption, and high efficiency.

Please note that these answers are general and may vary depending on specific application requirements and conditions.