ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
NCP1339HDR2G
Visa detalj Datablad

NCP1339HDR2G

Product Overview

Category

NCP1339HDR2G belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is primarily used in power supply systems, where it regulates and controls the flow of electrical power.

Characteristics

  • High efficiency: The NCP1339HDR2G offers excellent power conversion efficiency, minimizing energy losses.
  • Wide input voltage range: It can handle a broad range of input voltages, making it suitable for various applications.
  • Protection features: This IC incorporates multiple protection mechanisms, such as overvoltage and overcurrent protection, ensuring safe operation.
  • Low standby power consumption: It consumes minimal power during standby mode, contributing to energy savings.

Package

The NCP1339HDR2G is available in a compact and industry-standard package, allowing for easy integration into different electronic systems.

Essence

The essence of NCP1339HDR2G lies in its ability to efficiently regulate and control power flow, providing stable and reliable power supply solutions.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 8V - 16V
  • Output Voltage Range: 3.3V - 5V
  • Maximum Output Current: 2A
  • Switching Frequency: 200kHz - 500kHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Power supply pin
  4. FB: Feedback pin for output voltage regulation
  5. COMP: Compensation pin for stability control
  6. EN: Enable pin for turning the IC on/off
  7. SS: Soft-start pin for gradual power-up
  8. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The NCP1339HDR2G ensures a stable output voltage by continuously monitoring and adjusting the power flow.
  • Overvoltage protection: It safeguards the connected devices by automatically shutting down in case of excessive output voltage.
  • Overcurrent protection: This IC detects and limits the current to prevent damage to the system during high load conditions.
  • Soft-start function: The soft-start feature gradually increases the output voltage, reducing stress on the components during startup.

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings.
  • Wide input voltage range allows for versatile applications.
  • Multiple protection features ensure safe operation.
  • Compact package facilitates easy integration.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Operating temperature range might not be suitable for extreme environments.

Working Principles

The NCP1339HDR2G operates based on a pulse width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal. By continuously monitoring the feedback voltage, it compares it with the desired output voltage and adjusts the duty cycle accordingly. This control mechanism ensures a stable and accurate output voltage.

Detailed Application Field Plans

The NCP1339HDR2G finds applications in various fields, including: 1. Power supplies for consumer electronics such as televisions, set-top boxes, and audio systems. 2. Industrial equipment requiring reliable and efficient power management. 3. Automotive electronics, where stable power supply is crucial for proper functioning of various systems. 4. LED lighting systems, ensuring consistent and efficient illumination.

Detailed and Complete Alternative Models

  1. NCP1342DR2G: Similar to NCP1339HDR2G, but with a higher maximum output current of 3A.
  2. NCP1351ADR2G: Offers additional features like adjustable switching frequency and synchronization capability.
  3. NCP1362ADR2G: Provides enhanced protection features, including thermal shutdown and short-circuit protection.

These alternative models offer similar functionality to the NCP1339HDR2G but may have different specifications or additional features to suit specific application requirements.

Word count: 570 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NCP1339HDR2G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NCP1339HDR2G in technical solutions:

  1. Q: What is NCP1339HDR2G? A: NCP1339HDR2G is a high-voltage, synchronous buck controller IC used for power management applications.

  2. Q: What is the input voltage range supported by NCP1339HDR2G? A: The input voltage range supported by NCP1339HDR2G is typically between 4.5V and 65V.

  3. Q: What is the output voltage range that can be achieved using NCP1339HDR2G? A: The output voltage range achievable with NCP1339HDR2G depends on the external components used, but it can typically range from 0.8V to 60V.

  4. Q: What is the maximum output current that NCP1339HDR2G can handle? A: NCP1339HDR2G can handle a maximum output current of up to 6A.

  5. Q: Can NCP1339HDR2G operate in a wide temperature range? A: Yes, NCP1339HDR2G is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  6. Q: Does NCP1339HDR2G have built-in protection features? A: Yes, NCP1339HDR2G includes various protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Q: Can NCP1339HDR2G be used in automotive applications? A: Yes, NCP1339HDR2G is suitable for automotive applications as it meets the necessary requirements and standards.

  8. Q: What is the switching frequency of NCP1339HDR2G? A: The switching frequency of NCP1339HDR2G can be set externally and typically ranges from 50kHz to 1MHz.

  9. Q: Can NCP1339HDR2G be used in battery-powered applications? A: Yes, NCP1339HDR2G can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  10. Q: Are there any evaluation boards or reference designs available for NCP1339HDR2G? A: Yes, ON Semiconductor provides evaluation boards and reference designs for NCP1339HDR2G to help with the development and implementation process.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.