ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
NCP1271D65R2G
Visa detalj Datablad

NCP1271D65R2G - English Editing Encyclopedia Entry

Product Overview

Category

NCP1271D65R2G belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is commonly used in various power supply systems, including switch-mode power supplies (SMPS), battery chargers, and LED drivers.

Characteristics

  • High efficiency: The NCP1271D65R2G offers excellent power conversion efficiency, reducing energy loss and improving overall system performance.
  • Wide input voltage range: It can operate with input voltages ranging from 85V to 265V, making it suitable for a wide range of applications.
  • Protection features: The IC incorporates various protection mechanisms such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown, ensuring safe and reliable operation.
  • Low standby power consumption: It consumes minimal power during standby mode, contributing to energy savings.

Package

The NCP1271D65R2G is available in a compact and industry-standard SOIC-8 package. This package offers good thermal dissipation properties and ease of integration into circuit designs.

Essence

The essence of NCP1271D65R2G lies in its ability to efficiently regulate and control power in various applications, providing stable and reliable power supply solutions.

Packaging/Quantity

The IC is typically supplied in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 85V to 265V
  • Output Voltage Range: Adjustable, depending on application requirements
  • Maximum Output Power: Up to 65W
  • Operating Temperature Range: -40°C to +125°C
  • Switching Frequency: Adjustable, typically between 50kHz and 150kHz
  • Control Method: Current Mode Control

Detailed Pin Configuration

The NCP1271D65R2G IC has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for current regulation
  6. SS: Soft-start pin for gradual power-up
  7. DRAIN: High-voltage power switch output
  8. VSTR: Startup resistor connection for controlled startup sequence

Functional Features

  • Current Mode Control: The IC utilizes a current mode control scheme, which provides excellent line and load regulation, as well as fast transient response.
  • Frequency Modulation: It incorporates frequency modulation techniques to improve efficiency and reduce electromagnetic interference (EMI).
  • Overvoltage Protection (OVP): The IC monitors the output voltage and shuts down the power switch if it exceeds a predefined threshold, protecting downstream components.
  • Overcurrent Protection (OCP): It features an adjustable current limit to protect against excessive load currents.
  • Thermal Shutdown: In case of excessive temperature rise, the IC activates thermal shutdown to prevent damage to itself and the surrounding circuitry.

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings and reduced heat dissipation.
  • Wide input voltage range allows for versatile applications.
  • Compact package facilitates easy integration into designs.
  • Comprehensive protection mechanisms ensure safe operation.
  • Low standby power consumption contributes to energy efficiency.

Disadvantages

  • Limited maximum output power may not be suitable for high-power applications.
  • Requires external components for complete power supply implementation.

Working Principles

The NCP1271D65R2G operates based on a current mode control principle. It regulates the output voltage by adjusting the duty cycle of the internal power switch. By monitoring the feedback voltage and current sense signals, the IC continuously adjusts the duty cycle to maintain a stable output voltage. The frequency modulation technique employed helps optimize efficiency and minimize EMI.

Detailed Application Field Plans

The NCP1271D65R2G finds applications in various power management systems, including: - Switch-mode power supplies (SMPS) for consumer electronics, industrial equipment, and telecommunications. - Battery chargers for portable devices, electric vehicles, and renewable energy systems. - LED drivers for lighting applications, both residential and commercial.

Detailed and Complete Alternative Models

  • NCP1271D60R2G: Similar to NCP1271D65R2G but with a maximum output power of 60W.
  • NCP1271D70R2G: Similar to NCP1271D65R2G but with a maximum output power of 70W.
  • NCP1271D80R2G: Similar to NCP1271D65R2G but with a maximum output power of 80W.

These alternative models offer different maximum output power options to cater to specific application requirements.

Word count: 660 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NCP1271D65R2G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NCP1271D65R2G in technical solutions:

Q1: What is NCP1271D65R2G? A1: NCP1271D65R2G is a specific model of integrated circuit (IC) that is commonly used as a controller for offline power supplies.

Q2: What are the main features of NCP1271D65R2G? A2: Some of the main features of NCP1271D65R2G include high voltage startup, frequency jittering for EMI reduction, built-in protections, and a wide input voltage range.

Q3: What is the typical application of NCP1271D65R2G? A3: NCP1271D65R2G is typically used in various power supply applications such as AC-DC adapters, LED drivers, and auxiliary power supplies.

Q4: What is the maximum input voltage supported by NCP1271D65R2G? A4: The maximum input voltage supported by NCP1271D65R2G is typically around 700V.

Q5: How does NCP1271D65R2G provide protection against overvoltage? A5: NCP1271D65R2G has built-in overvoltage protection that shuts down the power supply when the output voltage exceeds a certain threshold.

Q6: Can NCP1271D65R2G be used in low-power applications? A6: Yes, NCP1271D65R2G can be used in low-power applications as it has a wide operating range and can handle different power levels.

Q7: Does NCP1271D65R2G have any built-in thermal protection? A7: Yes, NCP1271D65R2G has built-in thermal protection that prevents the IC from overheating by reducing the duty cycle or shutting down the power supply.

Q8: What is the typical efficiency of a power supply using NCP1271D65R2G? A8: The efficiency of a power supply using NCP1271D65R2G can vary depending on the specific design and operating conditions, but it is typically high due to the IC's features.

Q9: Can NCP1271D65R2G be used in both AC and DC input applications? A9: Yes, NCP1271D65R2G can be used in both AC and DC input applications as it supports a wide input voltage range.

Q10: Are there any application notes or reference designs available for NCP1271D65R2G? A10: Yes, the manufacturer of NCP1271D65R2G usually provides application notes and reference designs that can help engineers in implementing the IC in their technical solutions.