ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
MC10ELT22DT
Visa detalj Datablad

MC10ELT22DT

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal transmission and reception in high-speed digital communication systems
  • Characteristics: High-speed, low-power, differential receiver
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: The MC10ELT22DT is a versatile IC designed for reliable signal reception and transmission in high-speed digital communication systems.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: +3.0V to +5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Threshold: 100mV
  • Propagation Delay: 1.2ns
  • Output Current: ±50mA
  • Input Resistance: 50Ω
  • Output Voltage Swing: VCC - 1.4V

Detailed Pin Configuration

The MC10ELT22DT has the following pin configuration:

  1. VCC - Power supply voltage input
  2. GND - Ground reference
  3. Q - Differential output
  4. /Q - Complementary differential output
  5. D - Differential input
  6. /D - Complementary differential input
  7. VBB - Bias voltage input
  8. VEE - Negative power supply voltage input

Functional Features

  • High-speed operation up to 5 GHz
  • Low power consumption
  • Differential input and output for noise immunity
  • Wide operating voltage range
  • Compatible with various logic families
  • ESD (Electrostatic Discharge) protection on all pins

Advantages

  • Reliable signal reception and transmission in high-speed digital communication systems
  • Low power consumption enhances energy efficiency
  • Wide operating voltage range allows compatibility with different power supplies
  • Differential input and output provide noise immunity
  • ESD protection ensures robustness against electrostatic discharge

Disadvantages

  • Limited to differential signal processing, not suitable for single-ended applications
  • Requires careful consideration of termination and impedance matching for optimal performance

Working Principles

The MC10ELT22DT operates based on differential signaling principles. It receives a differential input signal and amplifies it to produce a corresponding differential output signal. The IC utilizes advanced circuitry to ensure high-speed operation, low power consumption, and reliable signal integrity.

Detailed Application Field Plans

The MC10ELT22DT is widely used in various high-speed digital communication systems, including:

  1. Data transmission in telecommunications networks
  2. High-speed data links in computer systems
  3. Fiber optic communication systems
  4. Wireless communication infrastructure
  5. Satellite communication systems
  6. Test and measurement equipment

Detailed and Complete Alternative Models

  1. MC100ELT22: Similar functionality, but operates at higher frequencies up to 8 GHz.
  2. MC10ELT21: Differential receiver with lower power consumption but limited to 3.3V supply voltage.
  3. MC100ELT23: Differential receiver with extended temperature range (-55°C to +125°C) for harsh environments.

These alternative models offer similar features and can be considered based on specific application requirements.

Word count: 350 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MC10ELT22DT i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MC10ELT22DT in technical solutions:

  1. Question: What is MC10ELT22DT?
    Answer: MC10ELT22DT is a high-speed differential ECL (Emitter-Coupled Logic) receiver designed for applications requiring data rates up to 3.8 Gbps.

  2. Question: What are the key features of MC10ELT22DT?
    Answer: The key features of MC10ELT22DT include low input/output skew, wide operating voltage range, differential inputs/outputs, and compatibility with other ECL devices.

  3. Question: In what applications can MC10ELT22DT be used?
    Answer: MC10ELT22DT can be used in various applications such as telecommunications, networking, data centers, high-speed data transmission, and clock distribution systems.

  4. Question: What is the maximum data rate supported by MC10ELT22DT?
    Answer: MC10ELT22DT supports data rates up to 3.8 Gbps, making it suitable for high-speed data transmission requirements.

  5. Question: Can MC10ELT22DT operate at different supply voltages?
    Answer: Yes, MC10ELT22DT has a wide operating voltage range from -4.2V to -5.7V, allowing flexibility in different power supply configurations.

  6. Question: Does MC10ELT22DT have built-in protection features?
    Answer: Yes, MC10ELT22DT includes built-in protection against electrostatic discharge (ESD) and latch-up, ensuring reliable operation in challenging environments.

  7. Question: Is MC10ELT22DT compatible with other ECL devices?
    Answer: Yes, MC10ELT22DT is compatible with other ECL devices, allowing for seamless integration into existing ECL-based systems.

  8. Question: What is the input/output skew of MC10ELT22DT?
    Answer: MC10ELT22DT has a low input/output skew of typically 50 ps, ensuring accurate data synchronization in high-speed applications.

  9. Question: Can MC10ELT22DT be used for clock distribution?
    Answer: Yes, MC10ELT22DT can be used for clock distribution due to its high-speed capabilities and low skew characteristics.

  10. Question: Are evaluation boards or reference designs available for MC10ELT22DT?
    Answer: Yes, evaluation boards and reference designs are available for MC10ELT22DT, providing a convenient starting point for designing with this device.

Please note that these answers are general and may vary depending on specific application requirements.