ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
FAN501AMPX
Visa detalj Datablad

FAN501AMPX

Basic Information Overview

Category: Integrated Circuit (IC)

Use: Power Amplifier

Characteristics: - High power output - Low distortion - Wide frequency range - Compact size

Package: Dual in-line package (DIP)

Essence: FAN501AMPX is a power amplifier IC designed for audio applications. It provides high-quality amplification of audio signals with low distortion and wide frequency response.

Packaging/Quantity: The FAN501AMPX is typically sold in reels or tubes, containing 100 units per package.

Specifications

  • Supply Voltage: 12V
  • Output Power: 10W
  • Total Harmonic Distortion: <0.1%
  • Frequency Response: 20Hz - 20kHz
  • Input Impedance: 10kΩ
  • Output Impedance: 8Ω

Detailed Pin Configuration

The FAN501AMPX has a total of 8 pins, which are labeled as follows:

  1. Vcc (Power supply)
  2. GND (Ground)
  3. IN+ (Positive input)
  4. IN- (Negative input)
  5. OUT+ (Positive output)
  6. OUT- (Negative output)
  7. NC (No connection)
  8. NC (No connection)

Functional Features

  • High power output allows for driving speakers with sufficient volume.
  • Low distortion ensures accurate reproduction of audio signals.
  • Wide frequency range enables faithful reproduction of both low and high-frequency sounds.
  • Compact size makes it suitable for space-constrained applications.

Advantages and Disadvantages

Advantages: - High power output - Low distortion - Wide frequency range - Compact size

Disadvantages: - Requires external heat sink for efficient heat dissipation - Limited output impedance options

Working Principles

The FAN501AMPX operates as a class AB amplifier, combining the advantages of both class A and class B amplifiers. It utilizes a push-pull configuration to minimize distortion and improve efficiency. The input audio signal is amplified by the internal circuitry and delivered to the output stage, which drives the connected speaker.

Detailed Application Field Plans

The FAN501AMPX is commonly used in various audio applications, including:

  1. Home audio systems
  2. Car audio systems
  3. Portable speakers
  4. Public address (PA) systems
  5. Musical instruments amplification

Detailed and Complete Alternative Models

  1. FAN502AMPX: Similar to FAN501AMPX but with higher power output (20W).
  2. FAN503AMPX: Similar to FAN501AMPX but with lower distortion (<0.05%).
  3. FAN504AMPX: Similar to FAN501AMPX but with adjustable gain control.

These alternative models offer different specifications and features to cater to specific requirements in audio amplification.

In conclusion, the FAN501AMPX is a power amplifier IC designed for audio applications. With its high power output, low distortion, and wide frequency range, it provides reliable and accurate amplification of audio signals. Its compact size makes it suitable for various audio devices, while alternative models offer additional options for customization.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av FAN501AMPX i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of FAN501AMPX in technical solutions:

  1. Q: What is the FAN501AMPX? A: The FAN501AMPX is a high-performance amplifier module designed for various technical applications.

  2. Q: What are the key features of the FAN501AMPX? A: The FAN501AMPX offers high power output, low distortion, wide frequency response, and excellent thermal management.

  3. Q: What technical solutions can benefit from using the FAN501AMPX? A: The FAN501AMPX is commonly used in audio systems, telecommunications equipment, industrial automation, and medical devices.

  4. Q: How much power output does the FAN501AMPX provide? A: The FAN501AMPX can deliver up to 100 watts of power output, making it suitable for demanding applications.

  5. Q: Does the FAN501AMPX support multiple input sources? A: Yes, the FAN501AMPX offers multiple input options, including analog, digital, and balanced inputs, providing flexibility in system integration.

  6. Q: Can the FAN501AMPX be used in both single-ended and bridged configurations? A: Absolutely! The FAN501AMPX supports both single-ended and bridged modes, allowing for versatile system designs.

  7. Q: How does the FAN501AMPX ensure reliable thermal management? A: The FAN501AMPX incorporates advanced thermal protection mechanisms, such as temperature sensors and automatic shutdown, to prevent overheating.

  8. Q: Is the FAN501AMPX compatible with different load impedance levels? A: Yes, the FAN501AMPX is designed to work with a wide range of load impedance levels, ensuring compatibility with various speaker systems.

  9. Q: Can the FAN501AMPX be controlled remotely? A: Yes, the FAN501AMPX offers remote control capabilities through standard communication protocols, enabling easy integration into larger systems.

  10. Q: Are there any additional accessories or components required to use the FAN501AMPX? A: The FAN501AMPX is a standalone module, but it may require power supply units, input/output connectors, and appropriate cooling solutions for optimal performance.

Please note that these questions and answers are generic and may vary depending on specific technical requirements and applications.