Bild kan vara representation.
Se specifikationer för produktinformation.
CAT803MTBI-GT3

CAT803MTBI-GT3

Product Overview

Category

CAT803MTBI-GT3 belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • Compact size
  • High reliability
  • Low power consumption
  • Wide operating temperature range

Package

The CAT803MTBI-GT3 is available in a small surface mount package.

Essence

The essence of CAT803MTBI-GT3 lies in its ability to provide reliable and accurate voltage monitoring in electronic systems.

Packaging/Quantity

This product is typically packaged in reels or trays, with varying quantities depending on the supplier.

Specifications

  • Supply Voltage: 2.5V to 5.5V
  • Reset Threshold Voltage: Adjustable
  • Reset Timeout Period: Programmable
  • Operating Temperature Range: -40°C to +85°C
  • Output Type: Active-Low

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground connection
  3. MR: Manual reset input
  4. RESET: Active-low reset output

Functional Features

  • Voltage monitoring: CAT803MTBI-GT3 monitors the supply voltage and generates a reset signal when it falls below a certain threshold.
  • Adjustable threshold: The reset threshold voltage can be adjusted to suit specific system requirements.
  • Programmable timeout period: The reset signal remains active for a programmable period after the supply voltage rises above the threshold.
  • Manual reset: An external manual reset input allows for immediate system reset if required.

Advantages and Disadvantages

Advantages

  • Compact size enables easy integration into space-constrained designs.
  • High reliability ensures consistent performance over extended periods.
  • Low power consumption minimizes energy usage in battery-powered applications.
  • Wide operating temperature range allows for use in harsh environments.

Disadvantages

  • Limited output options, only providing an active-low reset signal.
  • Requires external components for proper operation.

Working Principles

CAT803MTBI-GT3 operates by continuously monitoring the supply voltage. When the voltage falls below the set threshold, the reset output is activated, indicating a power failure or unstable voltage condition. The reset signal remains active for a programmable period after the voltage rises above the threshold, allowing the system to stabilize before resuming normal operation.

Detailed Application Field Plans

The CAT803MTBI-GT3 finds applications in various electronic systems, including but not limited to: - Microcontrollers and microprocessors - Communication devices - Industrial control systems - Automotive electronics - Power management circuits

Detailed and Complete Alternative Models

  1. CAT803MTBI-GT2: Similar to CAT803MTBI-GT3 with minor variations in specifications.
  2. CAT803MTBI-GT4: Higher voltage range and additional features compared to CAT803MTBI-GT3.
  3. CAT803MTBI-GT5: Lower power consumption and smaller package size than CAT803MTBI-GT3.

These alternative models offer similar functionality and can be considered as alternatives based on specific requirements.

Word count: 335 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av CAT803MTBI-GT3 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of CAT803MTBI-GT3 in technical solutions:

  1. Question: What is CAT803MTBI-GT3?
    Answer: CAT803MTBI-GT3 is a voltage supervisor and reset IC manufactured by ON Semiconductor.

  2. Question: What is the purpose of CAT803MTBI-GT3 in technical solutions?
    Answer: CAT803MTBI-GT3 is used to monitor the power supply voltage and generate a reset signal when the voltage falls below a specified threshold.

  3. Question: What is the operating voltage range of CAT803MTBI-GT3?
    Answer: CAT803MTBI-GT3 operates within a voltage range of 1.8V to 5.5V.

  4. Question: Can CAT803MTBI-GT3 be used in battery-powered applications?
    Answer: Yes, CAT803MTBI-GT3 can be used in battery-powered applications as it has a low quiescent current consumption.

  5. Question: How does CAT803MTBI-GT3 ensure reliable system operation?
    Answer: CAT803MTBI-GT3 provides a reset signal to the microcontroller or other devices, ensuring that they start up in a known state after a power-on or brownout event.

  6. Question: Does CAT803MTBI-GT3 have adjustable reset thresholds?
    Answer: No, CAT803MTBI-GT3 has fixed reset thresholds, typically set at 4.63V for high voltage and 4.38V for low voltage.

  7. Question: Can CAT803MTBI-GT3 tolerate voltage transients or spikes?
    Answer: Yes, CAT803MTBI-GT3 has built-in glitch immunity, allowing it to tolerate voltage transients and spikes without generating false reset signals.

  8. Question: What is the typical response time of CAT803MTBI-GT3?
    Answer: CAT803MTBI-GT3 has a typical response time of 20ms, ensuring quick detection and generation of reset signals.

  9. Question: Can CAT803MTBI-GT3 be used in automotive applications?
    Answer: Yes, CAT803MTBI-GT3 is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.

  10. Question: Are there any additional features of CAT803MTBI-GT3?
    Answer: Yes, CAT803MTBI-GT3 also includes a manual reset input and an open-drain reset output, providing flexibility in system design.

Please note that these answers are general and may vary depending on the specific application and requirements.