ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
BD243B
Visa detalj Datablad

BD243B Transistor

Product Overview

Category

The BD243B transistor belongs to the category of NPN power transistors.

Use

It is commonly used for general-purpose amplification and switching applications.

Characteristics

  • High current capability
  • Low collector-emitter saturation voltage
  • Complementary PNP type available (BD244B)

Package

The BD243B transistor is typically available in a TO-220 package.

Essence

This transistor is essential for various electronic circuits requiring high-power amplification and switching.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Emitter Voltage: 100V
  • Collector Current: 6A
  • Power Dissipation: 65W
  • DC Current Gain (hFE): 30 - 160
  • Transition Frequency: 3MHz

Detailed Pin Configuration

The BD243B transistor has three pins: 1. Base (B) 2. Emitter (E) 3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Good switching speed

Advantages

  • Suitable for medium-power applications
  • Complementary PNP type available for push-pull configurations

Disadvantages

  • Moderate transition frequency limits high-frequency applications
  • May require heat sinking for high-power operation

Working Principles

The BD243B operates as a current-controlled switch or amplifier. When a small current flows into the base terminal, it controls a larger current flow between the collector and emitter terminals, allowing for amplification or switching of electrical signals.

Detailed Application Field Plans

The BD243B transistor finds applications in: - Audio amplifiers - Power supplies - Motor control circuits - LED drivers - Switching regulators

Detailed and Complete Alternative Models

Some alternative models to the BD243B include: - TIP31C - 2N3055 - MJ15003

In conclusion, the BD243B transistor is a versatile component suitable for a wide range of amplification and switching applications, offering high current capability and low saturation voltage. Its complementary PNP type, the BD244B, provides flexibility for push-pull configurations. However, its moderate transition frequency may limit its use in high-frequency applications, and heat sinking may be necessary for high-power operation. Despite these limitations, the BD243B remains a popular choice for medium-power electronic circuits.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av BD243B i tekniska lösningar

  1. What is the BD243B transistor used for?

    • The BD243B is a general-purpose PNP bipolar junction transistor commonly used in audio amplifiers, power supplies, and other electronic circuits.

  2. What are the key specifications of the BD243B transistor?

    • The BD243B has a maximum collector current of 6A, a maximum collector-emitter voltage of 100V, and a maximum power dissipation of 65W.

  3. Can the BD243B be used for switching applications?

    • Yes, the BD243B can be used for low-frequency and medium-power switching applications due to its high current and voltage ratings.

  4. What are some typical circuit configurations using the BD243B?

    • Common circuit configurations include single-stage amplifiers, push-pull amplifiers, voltage regulators, and motor control circuits.

  5. How should the BD243B be mounted for optimal performance?

    • The BD243B should be mounted on a heat sink to dissipate heat effectively, especially when used in high-power applications.

  6. What are the recommended operating conditions for the BD243B?

    • The BD243B operates best within a temperature range of -65°C to 150°C and at a maximum junction temperature of 150°C.

  7. Are there any common failure modes associated with the BD243B?

    • Common failure modes include thermal runaway due to inadequate heat sinking and overvoltage breakdown if not properly protected in the circuit.

  8. Can the BD243B be used in automotive applications?

    • Yes, the BD243B is suitable for automotive applications such as electronic ignition systems and motor control circuits.

  9. What are the alternatives to the BD243B if it's not available?

    • Alternatives include similar PNP transistors such as BD242B, BD244B, or equivalent transistors from other manufacturers with comparable specifications.

  10. Where can I find detailed application notes for using the BD243B in technical solutions?

    • Detailed application notes and reference designs can be found in the datasheet provided by the manufacturer or in reputable electronics engineering resources.