ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
2N3903_D27Z
Visa detalj Datablad

2N3903_D27Z

Product Overview

  • Category: Transistor
  • Use: Amplification and switching in electronic circuits
  • Characteristics: Small signal NPN bipolar junction transistor, low power, high voltage, and moderate current capability
  • Package: TO-92
  • Essence: General-purpose amplifier and switch
  • Packaging/Quantity: Bulk packaging, typically available in reels of 2000 units

Specifications

  • Type: NPN
  • Maximum Collector-Emitter Voltage (Vce): 40V
  • Maximum Collector Current (Ic): 200mA
  • DC Current Gain (hfe): 100 - 300
  • Power Dissipation (Pd): 625mW
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High current gain
  • Low noise
  • Low power consumption
  • Fast switching speed

Advantages and Disadvantages

Advantages

  • Versatile applications
  • Small size
  • Low cost

Disadvantages

  • Limited power handling capability
  • Susceptible to temperature variations

Working Principles

The 2N3903_D27Z operates as a current-controlled switch or amplifier. When a small current flows into the base, it controls a much larger current between the collector and emitter, allowing it to amplify signals or act as a switch in electronic circuits.

Detailed Application Field Plans

  • Audio amplification
  • Signal amplification in sensor circuits
  • Switching applications in electronic devices

Detailed and Complete Alternative Models

  • 2N2222
  • BC547
  • BC548
  • 2N4401

In conclusion, the 2N3903_D27Z is a versatile NPN transistor with applications in various electronic circuits, offering advantages such as high current gain and low power consumption. However, its limited power handling capability and susceptibility to temperature variations should be considered when selecting it for specific applications.

[Word Count: 295]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 2N3903_D27Z i tekniska lösningar

  1. What is the 2N3903_D27Z transistor used for?

    • The 2N3903_D27Z is a general-purpose NPN bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the typical operating conditions for the 2N3903_D27Z?

    • The 2N3903_D27Z typically operates at a maximum collector current of 200mA, with a maximum collector-emitter voltage of 40V.

  3. Can the 2N3903_D27Z be used for audio amplification?

    • Yes, the 2N3903_D27Z can be used for small signal amplification in audio circuits due to its low noise and high gain characteristics.

  4. What are some common circuit configurations for the 2N3903_D27Z?

    • Common configurations include common emitter, common base, and common collector, each offering different advantages in specific applications.

  5. How do I determine the appropriate biasing for the 2N3903_D27Z in my circuit?

    • Biasing can be determined based on the specific application requirements, taking into account factors such as DC operating point, stability, and linearity.

  6. What are the thermal considerations for the 2N3903_D27Z?

    • Thermal considerations include proper heat sinking to ensure the transistor operates within its specified temperature range to maintain reliability and performance.

  7. Can the 2N3903_D27Z be used in high-frequency applications?

    • While the 2N3903_D27Z has limitations at very high frequencies, it can still be used in moderate frequency applications such as audio and lower frequency RF circuits.

  8. Are there any common failure modes or reliability concerns with the 2N3903_D27Z?

    • Common failure modes include thermal runaway under excessive power dissipation, so proper heat management is crucial for reliability.

  9. What are the key parameters to consider when selecting the 2N3903_D27Z for a specific application?

    • Key parameters include maximum ratings, gain, frequency response, and power dissipation, which should align with the requirements of the application.

  10. Where can I find detailed specifications and application notes for the 2N3903_D27Z?

    • Detailed specifications and application notes can be found in the manufacturer's datasheet and technical documentation, providing comprehensive information for design and implementation.