NXP USA Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
TJA1044GTJ
Visa detalj Datablad

TJA1044GTJ - English Editing Encyclopedia Entry

Product Overview

Category

The TJA1044GTJ belongs to the category of automotive transceivers.

Use

This product is primarily used for communication in automotive applications, specifically in the field of Controller Area Network (CAN) bus systems.

Characteristics

  • Robust and reliable communication interface
  • High-speed data transmission capability
  • Low power consumption
  • Designed for use in harsh automotive environments

Package

The TJA1044GTJ is available in a compact package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of the TJA1044GTJ lies in its ability to facilitate efficient and secure communication between various electronic control units (ECUs) within a vehicle.

Packaging/Quantity

The TJA1044GTJ is typically supplied in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Supply voltage: 5 V
  • Operating temperature range: -40°C to +125°C
  • Data rate: Up to 1 Mbps
  • Transceiver type: CAN high-speed transceiver
  • ESD protection: ±8 kV HBM (Human Body Model)
  • Current consumption: <5 mA (standby mode), <150 mA (active mode)

Detailed Pin Configuration

The TJA1044GTJ features the following pin configuration:

  1. VCC
  2. GND
  3. TXD
  4. RXD
  5. STB
  6. EN
  7. CANH
  8. CANL

Functional Features

  • High-speed data transmission: The TJA1044GTJ enables fast and reliable data transfer between ECUs.
  • Fault-tolerant communication: It supports error detection and correction mechanisms, ensuring robust communication even in noisy environments.
  • Wake-up capability: The transceiver can be configured to wake up the system upon receiving specific messages, reducing power consumption during idle periods.
  • Bus protection: The TJA1044GTJ provides built-in protection against electrostatic discharge (ESD) and other electrical faults.

Advantages and Disadvantages

Advantages

  • Reliable communication in automotive environments
  • Low power consumption
  • High-speed data transmission
  • Robust ESD protection

Disadvantages

  • Limited compatibility with non-automotive applications
  • Relatively higher cost compared to standard transceivers

Working Principles

The TJA1044GTJ operates based on the principles of the Controller Area Network (CAN) protocol. It utilizes differential signaling to transmit and receive data over a twisted pair of wires (CANH and CANL). The transceiver interfaces with the microcontroller or other ECUs, facilitating bidirectional communication.

Detailed Application Field Plans

The TJA1044GTJ is widely used in various automotive applications, including:

  1. Automotive body control modules
  2. Engine management systems
  3. Transmission control units
  4. Anti-lock braking systems (ABS)
  5. Airbag control units
  6. Instrument clusters
  7. Powertrain control modules

Detailed and Complete Alternative Models

  1. TJA1050 - High-speed CAN transceiver
  2. MCP2551 - CAN transceiver with integrated voltage regulator
  3. SN65HVD230 - Fault-protected CAN transceiver
  4. PCA82C250 - Low-power CAN transceiver

These alternative models offer similar functionality and are commonly used in automotive CAN bus systems.

Word count: 511 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TJA1044GTJ i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TJA1044GTJ in technical solutions:

  1. Q: What is TJA1044GTJ? A: TJA1044GTJ is a high-speed CAN transceiver used for communication between microcontrollers and the CAN bus.

  2. Q: What is the maximum data rate supported by TJA1044GTJ? A: TJA1044GTJ supports a maximum data rate of 5 Mbps, making it suitable for high-speed CAN networks.

  3. Q: Can TJA1044GTJ be used in automotive applications? A: Yes, TJA1044GTJ is commonly used in automotive applications due to its robustness and compatibility with automotive standards.

  4. Q: Does TJA1044GTJ support fault-tolerant CAN communication? A: Yes, TJA1044GTJ supports fault-tolerant CAN communication, ensuring reliable data transmission even in the presence of faults.

  5. Q: What is the operating voltage range of TJA1044GTJ? A: TJA1044GTJ operates within a voltage range of 4.5V to 5.5V, which is compatible with most microcontrollers.

  6. Q: Is TJA1044GTJ compatible with CAN FD (Flexible Data Rate)? A: No, TJA1044GTJ does not support CAN FD. It is designed for use with traditional CAN networks.

  7. Q: Can TJA1044GTJ be used in industrial automation systems? A: Yes, TJA1044GTJ can be used in industrial automation systems that utilize CAN communication for control and monitoring.

  8. Q: Does TJA1044GTJ have built-in protection features? A: Yes, TJA1044GTJ has built-in protection features such as thermal shutdown, overvoltage protection, and undervoltage lockout.

  9. Q: What is the typical current consumption of TJA1044GTJ? A: The typical current consumption of TJA1044GTJ is around 10 mA, making it suitable for low-power applications.

  10. Q: Can TJA1044GTJ be used in multi-node CAN networks? A: Yes, TJA1044GTJ can be used in multi-node CAN networks by connecting multiple transceivers to the same bus.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.