NXP USA Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
SC18IS602BIPW,112
Visa detalj Datablad

SC18IS602BIPW,112

Product Overview

Category

The SC18IS602BIPW,112 belongs to the category of integrated circuits (ICs) and specifically falls under the communication ICs.

Use

This product is primarily used for serial communication between a microcontroller and multiple peripheral devices. It acts as an I2C-bus/SPI interface bridge, allowing seamless communication between different devices.

Characteristics

  • Supports both I2C-bus and SPI interfaces.
  • Can be used as a master or slave device.
  • Low power consumption.
  • Wide operating voltage range.
  • Small form factor.
  • High-speed data transfer capability.

Package

The SC18IS602BIPW,112 comes in a small package known as TSSOP-16. This package offers a compact size and easy integration into various electronic systems.

Essence

The essence of this product lies in its ability to simplify communication between microcontrollers and peripheral devices by providing a bridge between the I2C-bus and SPI interfaces.

Packaging/Quantity

The SC18IS602BIPW,112 is typically packaged in reels, with each reel containing a specific quantity of chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 1.8V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Communication Interface: I2C-bus and SPI
  • Maximum Clock Frequency: 3.4 MHz (I2C-bus), 20 MHz (SPI)
  • Number of I/O Pins: 16
  • Supported Protocols: I2C, SPI, SMBus

Detailed Pin Configuration

The SC18IS602BIPW,112 has a total of 16 pins. Here is the detailed pin configuration:

  1. SDA: Serial Data Input/Output (I2C/SPI)
  2. SCL: Serial Clock Input (I2C/SPI)
  3. CSB: Chip Select Input (SPI)
  4. MISO: Master In Slave Out (SPI)
  5. MOSI: Master Out Slave In (SPI)
  6. SCLK: Serial Clock Input (SPI)
  7. IRQ: Interrupt Output
  8. VDD: Supply Voltage
  9. GND: Ground
  10. A0: Address Bit 0 (I2C)
  11. A1: Address Bit 1 (I2C)
  12. A2: Address Bit 2 (I2C)
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  • I2C-bus and SPI interface bridge.
  • Supports both master and slave modes.
  • Automatic address recognition for I2C mode.
  • Configurable interrupt output.
  • Built-in clock generator for SPI mode.
  • Programmable clock frequency.
  • Support for multiple devices on the bus.

Advantages and Disadvantages

Advantages

  • Simplifies communication between microcontrollers and peripheral devices.
  • Supports both I2C-bus and SPI interfaces, providing flexibility in system design.
  • Low power consumption helps in energy-efficient applications.
  • Wide operating voltage range allows compatibility with various systems.
  • Small form factor enables integration into space-constrained designs.
  • High-speed data transfer capability ensures efficient communication.

Disadvantages

  • Limited number of I/O pins may restrict the number of devices that can be connected simultaneously.
  • Requires additional programming and configuration for proper operation.
  • May not be suitable for applications requiring high-speed data transfer beyond its specified limits.

Working Principles

The SC18IS602BIPW,112 acts as an interface bridge between a microcontroller and peripheral devices using either the I2C-bus or SPI interface. In I2C mode, it automatically recognizes the address of the connected device, allowing seamless communication. In SPI mode, it provides a clock generator and supports both master and slave modes.

The chip receives commands from the microcontroller and translates them into the appropriate protocol for communication with the peripheral devices. It handles data transfer, addressing, and synchronization between the microcontroller and the connected devices.

Detailed Application Field Plans

The SC18IS602BIPW,112 finds applications in various fields where serial communication between microcontrollers and peripheral devices is required. Some potential application areas include:

  1. Industrial Automation: Used to connect sensors, actuators, and other devices to a central control system.
  2. Internet of Things (IoT): Enables communication between IoT devices and microcontrollers for data exchange.
  3. Consumer Electronics: Facilitates communication between microcontrollers and display modules, touchscreens, and other peripherals.
  4. Automotive Systems: Connects various components within a vehicle, such as sensors, switches, and displays, to the central control unit.
  5. Medical Devices: Allows

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SC18IS602BIPW,112 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SC18IS602BIPW,112 in technical solutions:

  1. Q: What is SC18IS602BIPW,112? A: SC18IS602BIPW,112 is a versatile I2C-bus to SPI bridge IC that allows communication between an I2C-bus and multiple SPI devices.

  2. Q: What are the key features of SC18IS602BIPW,112? A: Some key features include support for both master and slave modes, configurable I2C-bus clock frequency, up to 8 programmable chip select lines, and compatibility with various SPI devices.

  3. Q: How can SC18IS602BIPW,112 be used in technical solutions? A: SC18IS602BIPW,112 can be used as an interface between microcontrollers or other I2C-bus devices and SPI peripherals, enabling seamless communication between them.

  4. Q: Can SC18IS602BIPW,112 be used as an SPI master? A: Yes, SC18IS602BIPW,112 supports both master and slave modes, allowing it to function as an SPI master to control multiple SPI devices.

  5. Q: What is the maximum clock frequency supported by SC18IS602BIPW,112? A: SC18IS602BIPW,112 supports clock frequencies up to 3.4 MHz for the SPI bus and up to 400 kHz for the I2C-bus.

  6. Q: How many chip select lines can be configured with SC18IS602BIPW,112? A: SC18IS602BIPW,112 provides up to 8 programmable chip select (CS) lines, allowing communication with multiple SPI devices.

  7. Q: Can SC18IS602BIPW,112 be used in both 3.3V and 5V systems? A: Yes, SC18IS602BIPW,112 is compatible with both 3.3V and 5V systems, making it versatile for various applications.

  8. Q: Does SC18IS602BIPW,112 support interrupt functionality? A: Yes, SC18IS602BIPW,112 supports interrupt functionality, allowing efficient data transfer and reducing the need for continuous polling.

  9. Q: Is SC18IS602BIPW,112 compatible with popular microcontrollers? A: Yes, SC18IS602BIPW,112 is compatible with a wide range of microcontrollers, including popular ones like Arduino, Raspberry Pi, and STM32.

  10. Q: Are there any application examples for SC18IS602BIPW,112? A: Yes, some common application examples include connecting sensors, displays, memory chips, and other SPI devices to an I2C-bus system using SC18IS602BIPW,112 as the bridge IC.

Please note that the answers provided here are general and may vary depending on specific implementation details and requirements.