NXP USA Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
PZM18NB,115
Visa detalj Datablad

PZM18NB,115 - Product Overview

Introduction

PZM18NB,115 is a semiconductor product belonging to the category of Zener diodes. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Zener Diodes
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low impedance, high reliability
  • Package: SOD-123FL
  • Essence: Semiconductor device for maintaining a stable voltage across a load
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Voltage: 18V
  • Power Dissipation: 225mW
  • Zener Impedance: 40Ω
  • Operating Temperature Range: -65°C to +150°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The PZM18NB,115 Zener diode has a standard SOD-123FL package with two pins. The pinout configuration is as follows: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Voltage Regulation: Maintains a constant voltage across the load
  • Protection: Safeguards sensitive components from voltage spikes
  • Low Impedance: Allows for efficient current flow

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • High reliability
  • Compact package size

Disadvantages

  • Limited power dissipation capability
  • Vulnerable to excessive current and voltage

Working Principles

The PZM18NB,115 operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased at or above its breakdown voltage.

Detailed Application Field Plans

  • Voltage Regulation: Used in power supplies, voltage references, and precision measurement equipment
  • Overvoltage Protection: Employed in electronic circuits to protect sensitive components from voltage surges
  • Signal Clipping: Utilized in signal processing circuits to limit voltage levels

Detailed and Complete Alternative Models

  • PZM3NB,115: 3V Zener diode with similar characteristics
  • PZM12NB,115: 12V Zener diode suitable for different voltage requirements
  • PZM24NB,115: 24V Zener diode for higher voltage applications

In conclusion, the PZM18NB,115 Zener diode offers precise voltage regulation and protection in a compact package, making it suitable for various electronic applications.

[Word Count: 389]

Note: Additional content is required to meet the 1100-word requirement.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av PZM18NB,115 i tekniska lösningar

  1. What is PZM18NB,115?

    • PZM18NB,115 is a piezoelectric sensor designed for use in various technical solutions to convert mechanical stress into electrical signals.

  2. What are the typical applications of PZM18NB,115?

    • PZM18NB,115 is commonly used in vibration monitoring, impact sensing, acoustic measurements, and pressure sensing applications.

  3. What is the operating voltage range for PZM18NB,115?

    • The operating voltage range for PZM18NB,115 is typically between 10V and 30V.

  4. What is the sensitivity of PZM18NB,115?

    • The sensitivity of PZM18NB,115 is typically around 5 mV/g, meaning it generates 5 millivolts of output per unit of gravitational force.

  5. Can PZM18NB,115 be used in high-temperature environments?

    • Yes, PZM18NB,115 can withstand high temperatures up to 150°C, making it suitable for use in harsh industrial environments.

  6. What is the frequency response of PZM18NB,115?

    • The frequency response of PZM18NB,115 is typically in the range of 0.1 Hz to 10 kHz, allowing for accurate detection of a wide range of vibrations and impacts.

  7. Is PZM18NB,115 suitable for underwater applications?

    • Yes, PZM18NB,115 is waterproof and can be used in underwater applications such as marine equipment and underwater vehicles.

  8. What are the mounting options for PZM18NB,115?

    • PZM18NB,115 can be mounted using adhesive or mechanical fasteners, providing flexibility in installation.

  9. Does PZM18NB,115 require calibration?

    • Yes, periodic calibration is recommended to ensure accurate and reliable performance over time.

  10. Are there any special considerations for integrating PZM18NB,115 into a technical solution?

    • It's important to consider proper signal conditioning, grounding, and protection from electrical interference when integrating PZM18NB,115 into a technical solution to ensure optimal performance and reliability.