NXP USA Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
N74F299D,602
Visa detalj Datablad

N74F299D,602

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Logic Device
  • Characteristics:
    • High-speed operation
    • Wide operating voltage range
    • Low power consumption
  • Package: Dual In-Line Package (DIP)
  • Essence: 8-bit Universal Shift/Storage Register
  • Packaging/Quantity: Tube packaging, 25 pieces per tube

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage High Level (VIH): 2.0V to VCC + 0.5V
  • Input Voltage Low Level (VIL): -0.5V to 0.8V
  • Output Voltage High Level (VOH): VCC - 0.5V
  • Output Voltage Low Level (VOL): 0.5V
  • Maximum Clock Frequency: 100 MHz

Detailed Pin Configuration

The N74F299D,602 IC has a total of 20 pins. The pin configuration is as follows:

  1. D0 (Data Input 0)
  2. D1 (Data Input 1)
  3. D2 (Data Input 2)
  4. D3 (Data Input 3)
  5. D4 (Data Input 4)
  6. D5 (Data Input 5)
  7. D6 (Data Input 6)
  8. D7 (Data Input 7)
  9. GND (Ground)
  10. CP (Clock Pulse Input)
  11. DS (Serial Data Input)
  12. SH/LD (Shift/Load Control Input)
  13. OE (Output Enable Input)
  14. Q0 (Parallel Output 0)
  15. Q1 (Parallel Output 1)
  16. Q2 (Parallel Output 2)
  17. Q3 (Parallel Output 3)
  18. Q4 (Parallel Output 4)
  19. Q5 (Parallel Output 5)
  20. VCC (Supply Voltage)

Functional Features

  • Universal shift/parallel storage register with 8-bit capacity
  • Serial or parallel data entry modes
  • Shift and load control for flexible operation
  • Output enable for tri-state output capability
  • High-speed operation suitable for various applications

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data processing - Wide operating voltage range provides flexibility in different power supply scenarios - Low power consumption helps conserve energy - Versatile shift and storage capabilities enhance functionality

Disadvantages: - Limited capacity of 8 bits may not be sufficient for certain applications requiring larger data storage - DIP package may not be suitable for space-constrained designs

Working Principles

The N74F299D,602 is an 8-bit universal shift/storage register that can operate in serial or parallel mode. It has a clock pulse input (CP) which controls the shifting of data through the register. The shift/load control input (SH/LD) determines whether the data is shifted or loaded into the register.

When operating in serial mode, the serial data input (DS) receives the data bit by bit, and the clock pulse shifts the data through the register. In parallel mode, the data inputs (D0-D7) receive the data in parallel, and the SH/LD input loads the data into the register.

The output enable input (OE) enables or disables the outputs (Q0-Q5), allowing for tri-state output capability. This feature is useful when multiple devices are connected to the same bus, preventing conflicts between outputs.

Detailed Application Field Plans

The N74F299D,602 IC finds applications in various digital systems where shift and storage operations are required. Some potential application fields include: - Serial-to-parallel data conversion - Parallel-to-serial data conversion - Data buffering and temporary storage - Data synchronization and control

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the N74F299D,602 IC are: - SN74LS299: 8-bit universal shift/storage register from Texas Instruments - CD4021B: 8-stage static shift register from Texas Instruments - 74HC595: 8-bit serial-in, serial or parallel-out shift register from NXP Semiconductors

These alternative models can be considered based on specific requirements and availability.

Word count: 464 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av N74F299D,602 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of N74F299D,602 in technical solutions:

  1. Q: What is N74F299D,602? A: N74F299D,602 is a specific integrated circuit (IC) chip that is commonly used in digital logic applications.

  2. Q: What is the function of N74F299D,602? A: N74F299D,602 is an 8-bit universal shift/storage register with three-state outputs. It can perform parallel-to-serial or serial-to-parallel data conversion.

  3. Q: What voltage levels does N74F299D,602 support? A: N74F299D,602 operates at a supply voltage range of 4.5V to 5.5V.

  4. Q: How many inputs and outputs does N74F299D,602 have? A: N74F299D,602 has 8 inputs and 8 outputs.

  5. Q: Can N74F299D,602 be cascaded to increase the number of bits? A: Yes, multiple N74F299D,602 chips can be cascaded together to increase the number of bits in the shift register.

  6. Q: What is the maximum clock frequency supported by N74F299D,602? A: N74F299D,602 can operate at a maximum clock frequency of 100 MHz.

  7. Q: Does N74F299D,602 have any built-in error detection or correction features? A: No, N74F299D,602 does not have any built-in error detection or correction capabilities.

  8. Q: Can N74F299D,602 be used in both synchronous and asynchronous applications? A: Yes, N74F299D,602 can be used in both synchronous and asynchronous applications.

  9. Q: What is the power consumption of N74F299D,602? A: The power consumption of N74F299D,602 depends on various factors such as clock frequency, input/output loading, and supply voltage. Please refer to the datasheet for detailed information.

  10. Q: Are there any specific precautions to consider when using N74F299D,602? A: It is important to follow the recommended operating conditions, handling guidelines, and ESD precautions mentioned in the datasheet to ensure proper functionality and reliability of N74F299D,602.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate and detailed information.