NXP USA Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
MMA5206NDKGWR2

MMA5206NDKGWR2

Product Overview

Category

The MMA5206NDKGWR2 belongs to the category of motion sensors, specifically an accelerometer.

Use

It is used for measuring acceleration and tilt in various applications such as automotive, industrial, and consumer electronics.

Characteristics

  • High sensitivity
  • Low power consumption
  • Wide operating temperature range
  • Small package size

Package

The MMA5206NDKGWR2 comes in a small, surface-mount package.

Essence

This accelerometer is essential for accurately measuring changes in velocity and orientation.

Packaging/Quantity

The MMA5206NDKGWR2 is typically available in reels containing a specific quantity, usually 250 or 500 units per reel.

Specifications

  • Sensitivity: X/Y/Z-axis ±2g, ±4g, ±8g, ±16g selectable
  • Operating Voltage: 1.95V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Output Data Rate: 1.56 Hz to 800 Hz
  • Digital Output: I2C/SPI

Detailed Pin Configuration

The MMA5206NDKGWR2 has a standard pin configuration with pins for power supply, ground, and communication interface (I2C/SPI).

Functional Features

  • Three-axis sensing
  • Selectable sensitivity
  • Low power mode
  • Motion detection interrupt

Advantages and Disadvantages

Advantages

  • High sensitivity allows for precise measurements
  • Low power consumption extends battery life in portable devices
  • Wide operating temperature range enables use in harsh environments

Disadvantages

  • Limited to specific applications requiring motion sensing capabilities
  • May require calibration for optimal performance

Working Principles

The MMA5206NDKGWR2 operates based on the principles of microelectromechanical systems (MEMS) technology. It utilizes capacitive sensing to measure changes in acceleration along the X, Y, and Z axes.

Detailed Application Field Plans

Automotive

In automotive applications, the MMA5206NDKGWR2 can be used for vehicle stability control, rollover detection, and impact sensing.

Industrial

In industrial settings, this accelerometer can monitor equipment vibration, tilt, and shock levels to ensure operational safety and efficiency.

Consumer Electronics

For consumer electronics, the MMA5206NDKGWR2 is suitable for applications such as gaming controllers, virtual reality headsets, and wearable fitness trackers.

Detailed and Complete Alternative Models

  • MMA8452Q: Similar three-axis accelerometer with higher resolution
  • LIS3DH: Another three-axis accelerometer with ultra-low power consumption
  • ADXL345: Accelerometer with digital output and high resolution

Note: The above alternative models provide similar functionality and may be considered based on specific application requirements.

In conclusion, the MMA5206NDKGWR2 accelerometer offers high sensitivity, low power consumption, and versatile application possibilities across various industries. Its compact design and advanced features make it a valuable component for motion sensing applications.

[Word count: 436]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MMA5206NDKGWR2 i tekniska lösningar

  1. What is the MMA5206NDKGWR2?

    • The MMA5206NDKGWR2 is a 3-axis accelerometer sensor designed for motion and tilt sensing applications.

  2. What is the operating voltage range of the MMA5206NDKGWR2?

    • The operating voltage range of the MMA5206NDKGWR2 is typically between 1.95V and 3.6V.

  3. What are the typical applications of the MMA5206NDKGWR2?

    • The MMA5206NDKGWR2 is commonly used in applications such as industrial equipment, gaming devices, and wearable fitness trackers.

  4. What is the output data rate of the MMA5206NDKGWR2?

    • The output data rate of the MMA5206NDKGWR2 can be configured to operate at different rates, typically ranging from 1.56 Hz to 800 Hz.

  5. What is the resolution of the MMA5206NDKGWR2?

    • The MMA5206NDKGWR2 has a resolution of 12 bits for each axis.

  6. Can the MMA5206NDKGWR2 detect free-fall events?

    • Yes, the MMA5206NDKGWR2 is capable of detecting free-fall events and can be configured to trigger interrupts based on specific motion events.

  7. What communication interfaces does the MMA5206NDKGWR2 support?

    • The MMA5206NDKGWR2 supports both I2C and SPI communication interfaces for interfacing with microcontrollers or other devices.

  8. Is the MMA5206NDKGWR2 suitable for battery-powered devices?

    • Yes, the low power consumption and wide operating voltage range make the MMA5206NDKGWR2 suitable for battery-powered devices.

  9. What are the key features of the MMA5206NDKGWR2?

    • Some key features of the MMA5206NDKGWR2 include low power consumption, high sensitivity, configurable interrupt capabilities, and a small form factor.

  10. Are there any evaluation boards or development kits available for the MMA5206NDKGWR2?

    • Yes, there are evaluation boards and development kits available that can help in the rapid prototyping and testing of the MMA5206NDKGWR2 in technical solutions.