NXP USA Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
MMA5106NDIKGWR2

MMA5106NDIKGWR2

Product Overview

Category

The MMA5106NDIKGWR2 belongs to the category of motion sensors, specifically an accelerometer.

Use

This product is used for measuring acceleration and tilt in various applications such as automotive, industrial, and consumer electronics.

Characteristics

  • High sensitivity
  • Low power consumption
  • Wide measurement range
  • Small form factor

Package

The MMA5106NDIKGWR2 comes in a small, surface-mount package suitable for integration into compact electronic devices.

Essence

The essence of this product lies in its ability to accurately measure acceleration and tilt, enabling precise motion detection and control in diverse applications.

Packaging/Quantity

The MMA5106NDIKGWR2 is typically available in reels containing a specified quantity, usually 2500 units per reel.

Specifications

  • Measurement Range: ±6g
  • Sensitivity: 800 mV/g
  • Operating Voltage: 1.95V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Output Type: Digital I2C/SPI

Detailed Pin Configuration

The MMA5106NDIKGWR2 features a standard pin configuration with pins for power supply, ground, and communication interface (I2C/SPI).

Functional Features

  • High-resolution digital output
  • Low noise and high stability
  • Built-in self-test function
  • Flexible power options

Advantages and Disadvantages

Advantages

  • Accurate and reliable motion sensing
  • Low power consumption
  • Compact size for easy integration
  • Wide operating temperature range

Disadvantages

  • Limited measurement range compared to some other accelerometers
  • Requires careful handling during assembly due to its small size

Working Principles

The MMA5106NDIKGWR2 operates based on the principle of capacitive sensing, where changes in capacitance due to motion are converted into digital signals for accurate measurement of acceleration and tilt.

Detailed Application Field Plans

Automotive

In automotive applications, the MMA5106NDIKGWR2 can be used for vehicle stability control, rollover detection, and impact sensing.

Industrial

In industrial settings, this sensor can be utilized for equipment monitoring, vibration analysis, and structural health monitoring.

Consumer Electronics

For consumer electronics, the MMA5106NDIKGWR2 is suitable for applications such as gaming controllers, virtual reality systems, and wearable devices.

Detailed and Complete Alternative Models

  • MMA8452Q: A similar accelerometer with a wider measurement range
  • LIS3DH: Another compact accelerometer with low power consumption and high accuracy

In conclusion, the MMA5106NDIKGWR2 offers a compact and reliable solution for motion sensing in various applications, with its high sensitivity and low power consumption making it a preferred choice for many design engineers.

Word Count: 416

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MMA5106NDIKGWR2 i tekniska lösningar

  1. What is the MMA5106NDIKGWR2 used for?

    • The MMA5106NDIKGWR2 is a 3-axis accelerometer designed for motion and tilt sensing applications.

  2. What is the operating voltage range of the MMA5106NDIKGWR2?

    • The operating voltage range of the MMA5106NDIKGWR2 is typically between 1.95V and 3.6V.

  3. What is the output data rate of the MMA5106NDIKGWR2?

    • The output data rate of the MMA5106NDIKGWR2 can be configured up to 800Hz.

  4. Can the MMA5106NDIKGWR2 be used for vibration monitoring?

    • Yes, the MMA5106NDIKGWR2 can be used for vibration monitoring due to its high sensitivity and wide measurement range.

  5. Is the MMA5106NDIKGWR2 suitable for automotive applications?

    • Yes, the MMA5106NDIKGWR2 is AEC-Q100 qualified, making it suitable for automotive applications.

  6. What is the resolution of the MMA5106NDIKGWR2?

    • The MMA5106NDIKGWR2 has a resolution of 10-bit digital output.

  7. Does the MMA5106NDIKGWR2 support low-power operation?

    • Yes, the MMA5106NDIKGWR2 features low-power modes to minimize power consumption.

  8. What communication interfaces does the MMA5106NDIKGWR2 support?

    • The MMA5106NDIKGWR2 supports both I2C and SPI communication interfaces.

  9. Can the MMA5106NDIKGWR2 be used in industrial equipment?

    • Yes, the robust design of the MMA5106NDIKGWR2 makes it suitable for use in various industrial equipment.

  10. Are there any evaluation boards available for the MMA5106NDIKGWR2?

    • Yes, there are evaluation boards and development kits available to facilitate the integration of the MMA5106NDIKGWR2 into technical solutions.