NXP USA Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
MM912G634DC2AP
Visa detalj Datablad

MM912G634DC2AP

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Automotive Electronics
  • Characteristics: High-performance, low-power consumption
  • Package: Dual Flat No-Lead (DFN)
  • Essence: Microcontroller for automotive applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Manufacturer: Freescale Semiconductor
  • Operating Voltage: 3.3V
  • Operating Temperature: -40°C to +125°C
  • Clock Frequency: Up to 80 MHz
  • Flash Memory: 512 KB
  • RAM: 64 KB
  • Number of Pins: 48
  • Communication Interfaces: CAN, LIN, SPI, I2C, UART
  • Analog-to-Digital Converter (ADC): 12-bit, 16 channels
  • Timers: 8-channel FlexTimer, 6-channel eTimer
  • Operating Current: 10 mA (typical)

Detailed Pin Configuration

The MM912G634DC2AP has a total of 48 pins. The pin configuration is as follows:

  1. VDDA - Analog Power Supply
  2. VSSA - Analog Ground
  3. VDD - Digital Power Supply
  4. VSS - Digital Ground
  5. RESET - Reset Input
  6. XTAL - Crystal Oscillator Input
  7. XTAL - Crystal Oscillator Output
  8. IRQ - Interrupt Request Output
  9. PTA0 - General Purpose Input/Output (GPIO)
  10. PTA1 - GPIO
  11. PTA2 - GPIO
  12. PTA3 - GPIO
  13. PTA4 - GPIO
  14. PTA5 - GPIO
  15. PTA6 - GPIO
  16. PTA7 - GPIO
  17. PTB0 - GPIO
  18. PTB1 - GPIO
  19. PTB2 - GPIO
  20. PTB3 - GPIO
  21. PTB4 - GPIO
  22. PTB5 - GPIO
  23. PTB6 - GPIO
  24. PTB7 - GPIO
  25. PTC0 - GPIO
  26. PTC1 - GPIO
  27. PTC2 - GPIO
  28. PTC3 - GPIO
  29. PTC4 - GPIO
  30. PTC5 - GPIO
  31. PTC6 - GPIO
  32. PTC7 - GPIO
  33. PTD0 - GPIO
  34. PTD1 - GPIO
  35. PTD2 - GPIO
  36. PTD3 - GPIO
  37. PTD4 - GPIO
  38. PTD5 - GPIO
  39. PTD6 - GPIO
  40. PTD7 - GPIO
  41. VDDIO - I/O Power Supply
  42. VSSIO - I/O Ground
  43. CANH - CAN High
  44. CANL - CAN Low
  45. LIN - Local Interconnect Network
  46. SPI - Serial Peripheral Interface
  47. I2C - Inter-Integrated Circuit
  48. UART - Universal Asynchronous Receiver/Transmitter

Functional Features

  • High-performance microcontroller designed for automotive applications
  • Supports various communication interfaces such as CAN, LIN, SPI, I2C, and UART
  • Integrated analog-to-digital converter (ADC) for precise measurements
  • Flexible timer modules for accurate timing control
  • Low-power consumption for efficient operation
  • Wide operating temperature range suitable for automotive environments
  • Robust package design for reliable performance

Advantages and Disadvantages

Advantages: - High-performance capabilities - Versatile communication interfaces - Precise analog measurements - Accurate timing control - Low-power consumption

Disadvantages: - Limited flash memory and RAM capacity compared to some other models - Relatively higher cost compared to lower-end microcontrollers

Working Principles

The MM912G634DC2AP operates based on the principles of a microcontroller. It executes instructions stored in its flash memory to perform various tasks. The integrated peripherals, such as communication interfaces, timers, and ADC, enable it to interact with external devices and sensors. The microcontroller's firmware determines its behavior and functionality.

Detailed Application Field Plans

The MM912G634DC2AP is specifically designed for automotive applications. It can be used in various automotive systems, including:

  1. Engine Control Units (ECUs)
  2. Body Control Modules (BCMs)
  3. Instrument Clusters
  4. Powertrain Control Modules (PCMs)
  5. Anti-lock Braking Systems (ABS)
  6. Airbag Control Units (ACUs)
  7. Tire Pressure Monitoring Systems (TPMS)
  8. Lighting Control Modules
  9. HVAC Control Units
  10. Infotainment

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MM912G634DC2AP i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MM912G634DC2AP in technical solutions:

  1. Q: What is MM912G634DC2AP? A: MM912G634DC2AP is a specific model of microcontroller designed for automotive applications.

  2. Q: What are the key features of MM912G634DC2AP? A: Some key features include an ARM Cortex-M0+ core, integrated LIN transceiver, voltage regulator, and various communication interfaces.

  3. Q: What are the typical applications of MM912G634DC2AP? A: MM912G634DC2AP is commonly used in automotive systems such as body control modules, lighting control modules, and motor control units.

  4. Q: How does MM912G634DC2AP communicate with other devices? A: MM912G634DC2AP supports various communication interfaces like LIN, SPI, I2C, and UART to interact with other devices in the system.

  5. Q: Can MM912G634DC2AP be programmed by the user? A: Yes, MM912G634DC2AP can be programmed by the user using standard development tools and programming languages like C or assembly.

  6. Q: Does MM912G634DC2AP have any built-in safety features? A: Yes, MM912G634DC2AP includes safety features like fault detection and diagnostics, which help ensure reliable operation in automotive environments.

  7. Q: What is the operating voltage range of MM912G634DC2AP? A: MM912G634DC2AP operates within a voltage range of typically 3.0V to 5.5V.

  8. Q: Can MM912G634DC2AP withstand harsh automotive conditions? A: Yes, MM912G634DC2AP is designed to meet automotive-grade requirements and can withstand harsh conditions like temperature variations, vibrations, and electromagnetic interference.

  9. Q: Are there any development tools available for MM912G634DC2AP? A: Yes, the manufacturer provides development tools like an integrated development environment (IDE) and software libraries to facilitate programming and debugging.

  10. Q: Where can I find more information about MM912G634DC2AP? A: You can refer to the datasheet, application notes, and technical documentation provided by the manufacturer for detailed information about MM912G634DC2AP.

Please note that the specific details may vary depending on the manufacturer's documentation and the application requirements.