NJR Corporation/NJRC
Bild kan vara representation.
Se specifikationer för produktinformation.
NJM2506M#
Visa detalj Datablad

NJM2506M# - English Editing Encyclopedia Entry

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: High performance, low noise, compact size
  • Package: SOP-8 (Small Outline Package)
  • Essence: The NJM2506M# is a high-performance amplifier IC designed for various audio applications.
  • Packaging/Quantity: Available in reels of 2,500 units

Specifications

  • Operating Voltage: ±2.5V to ±18V
  • Input Bias Current: 1pA (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 5V/µs (typical)
  • Input Offset Voltage: 0.3mV (typical)
  • Input Voltage Noise: 4nV/√Hz (typical)
  • Output Current: 50mA (typical)

Detailed Pin Configuration

The NJM2506M# has a SOP-8 package with the following pin configuration:

| Pin No. | Pin Name | Description | |---------|----------|-------------| | 1 | V+ | Positive Power Supply | | 2 | IN- | Inverting Input | | 3 | IN+ | Non-Inverting Input | | 4 | GND | Ground | | 5 | OUT | Output | | 6 | NC | No Connection | | 7 | NC | No Connection | | 8 | V- | Negative Power Supply |

Functional Features

  • High gain and bandwidth for accurate signal amplification
  • Low input bias current for minimal distortion
  • Low noise performance for clear audio reproduction
  • Wide operating voltage range for flexibility in various applications
  • Short-circuit protection for enhanced reliability

Advantages and Disadvantages

Advantages: - High performance and low noise characteristics - Compact size for space-constrained designs - Wide operating voltage range allows for versatile applications

Disadvantages: - Limited output current capability compared to some other amplifier ICs - No connection pins may require additional consideration during PCB layout

Working Principles

The NJM2506M# is a voltage-feedback operational amplifier. It amplifies the difference between the non-inverting input (IN+) and the inverting input (IN-) by a factor determined by the gain setting resistors connected externally. The amplified signal is then available at the output pin (OUT). The IC operates within the specified voltage range, providing accurate amplification with low distortion and noise.

Detailed Application Field Plans

The NJM2506M# can be used in various audio applications, including: 1. Audio amplifiers for consumer electronics 2. Portable audio devices 3. Musical instruments 4. Automotive audio systems 5. Professional audio equipment

Detailed and Complete Alternative Models

  1. LM358: Dual Operational Amplifier
  2. TL072: Low Noise JFET-Input Operational Amplifier
  3. AD823: Precision Instrumentation Amplifier
  4. TDA7294: Audio Power Amplifier

These alternative models offer similar functionality and can be considered as substitutes for the NJM2506M# depending on specific requirements.

In conclusion, the NJM2506M# is a high-performance amplifier IC suitable for various audio applications. Its compact size, low noise, and wide operating voltage range make it an ideal choice for audio amplification needs. While it has limitations in terms of output current and no connection pins, there are alternative models available that can fulfill similar requirements.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NJM2506M# i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NJM2506M# in technical solutions:

  1. Q: What is NJM2506M#? A: NJM2506M# is a specific model number of an integrated circuit (IC) developed by New Japan Radio. It is commonly used in various technical solutions.

  2. Q: What is the purpose of NJM2506M#? A: NJM2506M# is primarily used as a voltage regulator IC, providing stable and regulated power supply to other components in a circuit.

  3. Q: What is the input voltage range for NJM2506M#? A: The input voltage range for NJM2506M# typically varies between 4.5V and 40V.

  4. Q: What is the output voltage range of NJM2506M#? A: The output voltage range of NJM2506M# can be adjusted using external resistors, but it typically ranges from 1.2V to 37V.

  5. Q: What is the maximum output current of NJM2506M#? A: The maximum output current of NJM2506M# depends on the specific model variant, but it is usually around 500mA.

  6. Q: Can NJM2506M# handle both positive and negative voltages? A: No, NJM2506M# is designed to handle only positive voltages. It cannot regulate negative voltages.

  7. Q: Is NJM2506M# suitable for battery-powered applications? A: Yes, NJM2506M# is often used in battery-powered applications due to its low dropout voltage and low quiescent current.

  8. Q: Does NJM2506M# have built-in protection features? A: Yes, NJM2506M# typically includes built-in protection features such as thermal shutdown, overcurrent protection, and reverse polarity protection.

  9. Q: Can NJM2506M# be used in automotive applications? A: Yes, NJM2506M# is suitable for automotive applications as it can withstand a wide range of operating temperatures and has high reliability.

  10. Q: Are there any recommended external components to use with NJM2506M#? A: Yes, it is recommended to use input and output capacitors to stabilize the voltage and reduce noise when using NJM2506M#. The specific values depend on the application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by New Japan Radio for NJM2506M#.