Monolithic Power Systems Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
MP3356DG-LF-Z
Visa detalj Datablad

MP3356DG-LF-Z

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency voltage regulator - Wide input voltage range - Low dropout voltage - Overcurrent protection - Thermal shutdown protection

Package: DG Package (8-Pin SOIC)

Essence: The MP3356DG-LF-Z is a power management IC designed to regulate voltage efficiently in various electronic devices.

Packaging/Quantity: The MP3356DG-LF-Z is available in tape and reel packaging, with 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 3A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 100μA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP3356DG-LF-Z has the following pin configuration:

  1. EN (Enable): Enable control pin for turning the IC on/off.
  2. FB (Feedback): Feedback pin for regulating the output voltage.
  3. GND (Ground): Ground reference for the IC.
  4. VIN (Input Voltage): Input voltage supply pin.
  5. SW (Switch): Switching node for the internal power MOSFET.
  6. PGND (Power Ground): Ground reference for the power stage.
  7. VOUT (Output Voltage): Regulated output voltage.
  8. LX (Inductor): Connection to the external inductor.

Functional Features

  • High efficiency conversion of input voltage to regulated output voltage.
  • Overcurrent protection prevents damage to the IC and connected devices.
  • Thermal shutdown protection prevents overheating of the IC.
  • Enable control allows for easy on/off operation.

Advantages and Disadvantages

Advantages: - High efficiency conversion reduces power loss. - Wide input voltage range accommodates various power sources. - Low dropout voltage ensures stable output even with low input voltage. - Overcurrent and thermal shutdown protection enhance device safety.

Disadvantages: - Limited maximum output current of 3A may not be suitable for high-power applications. - Operating temperature range of -40°C to +85°C may restrict usage in extreme environments.

Working Principles

The MP3356DG-LF-Z operates as a step-down voltage regulator. It takes an input voltage within the specified range and converts it to a lower, regulated output voltage. The internal power MOSFET switches on and off at a high frequency, allowing efficient energy transfer from the input to the output. The feedback mechanism adjusts the duty cycle of the switching to maintain a stable output voltage.

Detailed Application Field Plans

The MP3356DG-LF-Z is commonly used in various electronic devices that require efficient voltage regulation. Some application fields include:

  1. Portable electronic devices: Smartphones, tablets, portable media players.
  2. Battery-powered devices: Wireless headphones, portable speakers, handheld gaming consoles.
  3. IoT devices: Wearable devices, smart home sensors, connected appliances.
  4. Automotive electronics: Infotainment systems, navigation systems, LED lighting.

Detailed and Complete Alternative Models

  1. MP3350DG-LF-Z: Similar functionality with a lower maximum output current of 2A.
  2. MP3360DG-LF-Z: Higher maximum output current of 4A, suitable for higher-power applications.
  3. MP3370DG-LF-Z: Enhanced features such as adjustable output voltage and synchronization capability.

These alternative models provide options based on specific requirements and power demands.

Word count: 516 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MP3356DG-LF-Z i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MP3356DG-LF-Z in technical solutions:

  1. Q: What is MP3356DG-LF-Z? A: MP3356DG-LF-Z is a specific model of integrated circuit (IC) used for power management applications.

  2. Q: What are the typical applications of MP3356DG-LF-Z? A: MP3356DG-LF-Z is commonly used in various technical solutions such as LED lighting, backlighting, and general-purpose power management.

  3. Q: What is the input voltage range supported by MP3356DG-LF-Z? A: The input voltage range supported by MP3356DG-LF-Z is typically between 4.5V and 24V.

  4. Q: What is the output current capability of MP3356DG-LF-Z? A: MP3356DG-LF-Z can provide an output current of up to 3A.

  5. Q: Does MP3356DG-LF-Z require any external components for operation? A: Yes, MP3356DG-LF-Z requires external components such as inductors, capacitors, and resistors for proper operation.

  6. Q: Can MP3356DG-LF-Z operate in a wide temperature range? A: Yes, MP3356DG-LF-Z is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  7. Q: Is MP3356DG-LF-Z suitable for battery-powered applications? A: Yes, MP3356DG-LF-Z is suitable for battery-powered applications as it supports low-power operation and has efficient power conversion capabilities.

  8. Q: Does MP3356DG-LF-Z have built-in protection features? A: Yes, MP3356DG-LF-Z incorporates various protection features such as over-current protection, thermal shutdown, and under-voltage lockout.

  9. Q: Can MP3356DG-LF-Z be used in dimming applications for LED lighting? A: Yes, MP3356DG-LF-Z supports PWM (Pulse Width Modulation) dimming, making it suitable for dimming applications in LED lighting.

  10. Q: Is there any reference design or application note available for MP3356DG-LF-Z? A: Yes, the manufacturer of MP3356DG-LF-Z typically provides reference designs and application notes that can help users understand and implement the IC in their technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and specifications for MP3356DG-LF-Z.