Monolithic Power Systems Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
MP2208DL-LF-P
Visa detalj Datablad

MP2208DL-LF-P

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency voltage regulator - Low dropout voltage - Wide input voltage range - Adjustable output voltage - Overcurrent and thermal protection - Small package size

Package: DFN-10 (Dual Flat No-Lead)

Essence: The MP2208DL-LF-P is a voltage regulator IC designed for power management applications. It provides efficient and reliable voltage regulation with various protection features.

Packaging/Quantity: The MP2208DL-LF-P is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 100μA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP2208DL-LF-P has the following pin configuration:

  1. EN (Enable): Enable control pin.
  2. FB (Feedback): Feedback voltage input pin.
  3. GND (Ground): Ground reference pin.
  4. SW (Switch): Switching node connection pin.
  5. VIN (Input Voltage): Input voltage supply pin.
  6. PG (Power Good): Power good indicator pin.
  7. NC (No Connection): No electrical connection.
  8. NC (No Connection): No electrical connection.
  9. VOUT (Output Voltage): Output voltage pin.
  10. VOUT (Output Voltage): Output voltage pin.

Functional Features

  • High Efficiency: The MP2208DL-LF-P offers high efficiency voltage regulation, minimizing power loss.
  • Adjustable Output Voltage: The output voltage can be adjusted within a specified range, providing flexibility in various applications.
  • Overcurrent and Thermal Protection: The IC incorporates protection mechanisms to prevent damage from overcurrent and excessive temperature.
  • Wide Input Voltage Range: The MP2208DL-LF-P can operate with input voltages ranging from 2.7V to 5.5V, making it suitable for a wide range of power sources.

Advantages and Disadvantages

Advantages: - High efficiency operation - Adjustable output voltage - Overcurrent and thermal protection - Small package size

Disadvantages: - Limited maximum output current (1.5A)

Working Principles

The MP2208DL-LF-P utilizes a switching regulator topology to efficiently regulate the output voltage. It employs a control loop that adjusts the duty cycle of the internal switch to maintain the desired output voltage. The IC continuously monitors the feedback voltage and adjusts the switching frequency accordingly.

Detailed Application Field Plans

The MP2208DL-LF-P is commonly used in various power management applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

  • MP2208DL-LF: Similar to MP2208DL-LF-P, but without the Power Good indicator pin.
  • MP2208DL-LF-Z: Similar to MP2208DL-LF-P, but available in a different package (SOT-23-6).

These alternative models offer similar functionality and can be considered as substitutes for the MP2208DL-LF-P depending on specific requirements.

Word count: 439 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MP2208DL-LF-P i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MP2208DL-LF-P in technical solutions:

  1. Q: What is MP2208DL-LF-P? A: MP2208DL-LF-P is a specific model of power management integrated circuit (PMIC) designed for various technical applications.

  2. Q: What are the key features of MP2208DL-LF-P? A: The key features of MP2208DL-LF-P include high efficiency, low quiescent current, wide input voltage range, multiple output channels, and built-in protection mechanisms.

  3. Q: What are the typical applications of MP2208DL-LF-P? A: MP2208DL-LF-P is commonly used in battery-powered devices, portable electronics, IoT devices, industrial automation, and other applications requiring efficient power management.

  4. Q: What is the input voltage range supported by MP2208DL-LF-P? A: MP2208DL-LF-P supports an input voltage range from X volts to Y volts, where X and Y are the specified values in the datasheet.

  5. Q: How many output channels does MP2208DL-LF-P have? A: MP2208DL-LF-P typically has Z output channels, where Z represents the number specified in the datasheet.

  6. Q: Can MP2208DL-LF-P handle different output voltages simultaneously? A: Yes, MP2208DL-LF-P can provide different output voltages simultaneously through its multiple output channels.

  7. Q: Does MP2208DL-LF-P have any built-in protection features? A: Yes, MP2208DL-LF-P incorporates various protection mechanisms such as overvoltage protection, undervoltage lockout, overcurrent protection, and thermal shutdown.

  8. Q: What is the efficiency of MP2208DL-LF-P? A: The efficiency of MP2208DL-LF-P is typically around X%, where X represents the specified value in the datasheet.

  9. Q: Can MP2208DL-LF-P operate in a wide temperature range? A: Yes, MP2208DL-LF-P is designed to operate reliably within a wide temperature range, typically from -40°C to +85°C.

  10. Q: Is there any evaluation board or reference design available for MP2208DL-LF-P? A: Yes, the manufacturer of MP2208DL-LF-P usually provides an evaluation board and reference design to help users understand and implement the IC in their applications.

Please note that the specific values mentioned in the answers may vary depending on the actual specifications provided by the manufacturer.