Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
JANTXV1N753AUR-1
Visa detalj Datablad

JANTXV1N753AUR-1

Product Overview

Category

The JANTXV1N753AUR-1 belongs to the category of semiconductor devices.

Use

It is commonly used as a voltage regulator or surge suppressor in electronic circuits.

Characteristics

  • High reliability
  • Low leakage current
  • Fast response time

Package

The JANTXV1N753AUR-1 is typically available in a DO-41 package.

Essence

This product serves as a crucial component in protecting electronic circuits from voltage spikes and surges.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

  • Maximum Reverse Voltage: 6.8V
  • Breakdown Voltage: 7.5V
  • Maximum Forward Voltage: 1.1V
  • Maximum Reverse Leakage Current: 5µA
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTXV1N753AUR-1 has two pins, anode, and cathode, which are clearly labeled for easy identification.

Functional Features

  • Voltage regulation
  • Surge suppression
  • Protection against overvoltage conditions

Advantages and Disadvantages

Advantages

  • High reliability
  • Fast response time
  • Low leakage current

Disadvantages

  • Limited maximum reverse voltage
  • Relatively low breakdown voltage

Working Principles

The JANTXV1N753AUR-1 operates based on the principle of Zener breakdown, where it maintains a nearly constant voltage across its terminals when operated in the reverse-biased direction.

Detailed Application Field Plans

The JANTXV1N753AUR-1 finds extensive use in various electronic applications, including: - Power supply units - Voltage regulation circuits - Surge protection modules - Electronic instrumentation

Detailed and Complete Alternative Models

Some alternative models to the JANTXV1N753AUR-1 include: - JANTXV1N5809US - JANTXV1N5622US - JANTXV1N5806US

In conclusion, the JANTXV1N753AUR-1 is a reliable semiconductor device that plays a critical role in safeguarding electronic circuits from voltage fluctuations and surges. Its high reliability, fast response time, and low leakage current make it a preferred choice for various electronic applications. However, its limitations in maximum reverse voltage and breakdown voltage should be considered when selecting alternative models for specific requirements.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av JANTXV1N753AUR-1 i tekniska lösningar

  1. What is the JANTXV1N753AUR-1 diode used for?

    • The JANTXV1N753AUR-1 diode is commonly used for voltage regulation and transient suppression in various technical solutions.

  2. What are the key specifications of the JANTXV1N753AUR-1 diode?

    • The JANTXV1N753AUR-1 diode has a breakdown voltage of 6.8V, a maximum reverse leakage current of 5µA, and a forward voltage drop of 1.1V at 200mA.

  3. How does the JANTXV1N753AUR-1 diode provide voltage regulation?

    • The JANTXV1N753AUR-1 diode maintains a relatively constant voltage drop across its terminals, providing regulation in circuits where a stable voltage is required.

  4. In what applications is the JANTXV1N753AUR-1 diode commonly used?

    • The JANTXV1N753AUR-1 diode is frequently employed in power supplies, voltage clamping, surge protection, and overvoltage crowbar protection circuits.

  5. What is the temperature range for the JANTXV1N753AUR-1 diode?

    • The JANTXV1N753AUR-1 diode is designed to operate within a temperature range of -65°C to +175°C, making it suitable for a wide range of environments.

  6. Does the JANTXV1N753AUR-1 diode require any special mounting considerations?

    • Yes, the JANTXV1N753AUR-1 diode should be mounted on a suitable heat sink or thermal pad to ensure proper heat dissipation, especially when operating at higher currents.

  7. What are the potential failure modes of the JANTXV1N753AUR-1 diode?

    • Common failure modes include excessive reverse voltage, overcurrent conditions, and thermal overstress, which can lead to degradation or catastrophic failure.

  8. Can the JANTXV1N753AUR-1 diode be used in automotive applications?

    • Yes, the JANTXV1N753AUR-1 diode is often utilized in automotive electronics for voltage regulation and transient protection due to its rugged construction and wide temperature range.

  9. Are there any recommended alternative diodes to the JANTXV1N753AUR-1 for specific applications?

    • Depending on the application requirements, alternatives such as the JANTXV1N5819UR-1 or JANTXV1N4148UR-1 may be suitable for similar functions.

  10. What precautions should be taken when handling and soldering the JANTXV1N753AUR-1 diode?

    • ESD precautions should be observed during handling, and proper soldering techniques, including limiting the duration and temperature of soldering, should be followed to prevent damage to the diode.