Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
JANTX2N5339
Visa detalj Datablad

JANTX2N5339

Product Overview

Category

The JANTX2N5339 belongs to the category of high-performance, NPN bipolar junction transistors (BJTs).

Use

It is commonly used for amplification and switching of electronic signals in various applications.

Characteristics

  • High voltage capability
  • Low leakage current
  • High current gain
  • Wide operating temperature range

Package

The JANTX2N5339 is typically available in a TO-39 metal can package.

Essence

This transistor is essential for electronic circuit design requiring high voltage and current amplification.

Packaging/Quantity

The JANTX2N5339 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Emitter Voltage (VCEO): 300V
  • Collector-Base Voltage (VCBO): 400V
  • Emitter-Base Voltage (VEBO): 7V
  • Collector Current (IC): 600mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 100MHz
  • Operating Temperature Range: -65°C to 200°C

Detailed Pin Configuration

The JANTX2N5339 has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High voltage capability allows for use in power supply circuits.
  • Low leakage current ensures minimal power loss in standby mode.
  • High current gain enables efficient signal amplification.

Advantages

  • Suitable for high voltage applications
  • Low power dissipation
  • Wide operating temperature range

Disadvantages

  • Limited maximum collector current compared to some alternative models
  • Relatively lower transition frequency

Working Principles

The JANTX2N5339 operates based on the principles of bipolar junction transistors, utilizing the flow of charge carriers to amplify or switch electronic signals.

Detailed Application Field Plans

The JANTX2N5339 is commonly used in the following applications: - Power supply circuits - Audio amplifiers - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTX2N5339 include: - 2N3904 - BC547 - 2N2222 - MPSA42

In conclusion, the JANTX2N5339 is a high-performance NPN transistor suitable for a wide range of electronic applications, particularly those requiring high voltage capabilities and low power dissipation.

Word count: 366

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av JANTX2N5339 i tekniska lösningar

Sure, here are 10 common questions and answers related to the application of JANTX2N5339:

  1. What is the JANTX2N5339 transistor used for?

    • The JANTX2N5339 is a high-reliability, general-purpose NPN bipolar junction transistor (BJT) commonly used in military and aerospace applications.

  2. What are the key specifications of the JANTX2N5339 transistor?

    • The JANTX2N5339 has a maximum collector current of 600 mA, a maximum power dissipation of 625 mW, and a maximum voltage rating of 50 V.

  3. Can the JANTX2N5339 be used in commercial applications?

    • While the JANTX2N5339 is designed for rugged environments, it can also be used in commercial applications where high reliability and performance are required.

  4. What are some typical circuit configurations for the JANTX2N5339?

    • The JANTX2N5339 can be used in common emitter, common base, and common collector configurations for various amplification and switching applications.

  5. What are the temperature specifications for the JANTX2N5339?

    • The JANTX2N5339 has an operating temperature range of -65°C to +200°C, making it suitable for extreme environmental conditions.

  6. Is the JANTX2N5339 suitable for high-frequency applications?

    • Yes, the JANTX2N5339 has a transition frequency (ft) of 150 MHz, making it suitable for moderate-speed switching and amplification at higher frequencies.

  7. Are there any recommended alternative transistors to the JANTX2N5339?

    • Some alternative transistors with similar characteristics include the JANTX2N2222A and JANTX2N4401, which may be suitable depending on specific application requirements.

  8. What are the packaging options available for the JANTX2N5339?

    • The JANTX2N5339 is available in various packages, including TO-18 metal can and TO-39 metal can, providing flexibility for different mounting and assembly methods.

  9. What are the typical applications for the JANTX2N5339 in aerospace and military systems?

    • The JANTX2N5339 is commonly used in communication systems, radar systems, electronic warfare equipment, and other mission-critical electronic subsystems.

  10. Where can I find detailed datasheets and application notes for the JANTX2N5339?

    • Detailed datasheets and application notes for the JANTX2N5339 can be obtained from authorized distributors, manufacturers' websites, or military/aerospace component suppliers.