Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
JANTX1N4627CUR-1
Visa detalj Datablad

JANTX1N4627CUR-1

Product Overview

Category

The JANTX1N4627CUR-1 belongs to the category of semiconductor diodes.

Use

It is commonly used in electronic circuits for rectification and voltage regulation.

Characteristics

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High temperature operation

Package

The JANTX1N4627CUR-1 is typically available in a DO-35 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) and for protecting circuits from reverse voltage.

Packaging/Quantity

It is usually packaged in reels or tubes, with varying quantities depending on the manufacturer.

Specifications

  • Maximum Reverse Voltage: 100V
  • Average Rectified Current: 1A
  • Forward Voltage Drop: 1V at 1A
  • Operating Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The JANTX1N4627CUR-1 has two pins, an anode, and a cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC
  • Protection against reverse voltage
  • Fast response time

Advantages and Disadvantages

Advantages

  • High reliability
  • Low forward voltage drop
  • Wide operating temperature range

Disadvantages

  • Limited maximum reverse voltage compared to some other diodes
  • Relatively low average rectified current capacity

Working Principles

The JANTX1N4627CUR-1 operates based on the principle of creating a one-way flow of current when forward biased, allowing current to pass through, and blocking the flow of current when reverse biased, preventing damage to the circuit.

Detailed Application Field Plans

The JANTX1N4627CUR-1 is widely used in: - Power supply units - Voltage regulators - Signal demodulation circuits - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4627CUR-1 include: - 1N4001: Similar characteristics, higher maximum reverse voltage - 1N4148: Faster switching speed, lower average rectified current capacity

In conclusion, the JANTX1N4627CUR-1 is a reliable semiconductor diode with efficient rectification capabilities and is commonly used in various electronic circuits for power supply and voltage regulation applications.

Word Count: 366

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av JANTX1N4627CUR-1 i tekniska lösningar

  1. What is the JANTX1N4627CUR-1?

    • The JANTX1N4627CUR-1 is a high-reliability, military-grade silicon power rectifier diode designed for use in demanding technical applications.

  2. What are the key specifications of the JANTX1N4627CUR-1?

    • The JANTX1N4627CUR-1 has a maximum repetitive peak reverse voltage of 100V, a forward current of 1A, and a low forward voltage drop.

  3. In what types of technical solutions is the JANTX1N4627CUR-1 commonly used?

    • This diode is commonly used in aerospace, defense, and other high-reliability applications where ruggedness and reliability are critical.

  4. What are the temperature specifications for the JANTX1N4627CUR-1?

    • The JANTX1N4627CUR-1 is designed to operate over a wide temperature range, typically from -65°C to +175°C.

  5. What are the packaging options available for the JANTX1N4627CUR-1?

    • The JANTX1N4627CUR-1 is available in various package options, including axial-lead and surface-mount packages, to suit different application requirements.

  6. How does the JANTX1N4627CUR-1 compare to commercial-grade diodes?

    • The JANTX1N4627CUR-1 is manufactured and tested to meet stringent military specifications, ensuring higher reliability and performance compared to commercial-grade diodes.

  7. Can the JANTX1N4627CUR-1 be used in high-frequency applications?

    • While it is primarily designed for general-purpose rectification, the JANTX1N4627CUR-1 can be used in moderate frequency applications with appropriate consideration of its characteristics.

  8. What are the potential failure modes of the JANTX1N4627CUR-1?

    • Common failure modes include excessive reverse voltage, overcurrent conditions, and thermal stress. Proper design and operating conditions can mitigate these risks.

  9. Are there any specific handling or storage requirements for the JANTX1N4627CUR-1?

    • It is recommended to store the diodes in a controlled environment to prevent exposure to moisture, extreme temperatures, and mechanical damage.

  10. Where can I find detailed application notes and guidelines for using the JANTX1N4627CUR-1 in technical solutions?

    • Detailed application notes and guidelines can be found in the product datasheet, as well as through the manufacturer's technical support resources.