Microchip Technology
Bild kan vara representation.
Se specifikationer för produktinformation.
SY10ELT21ZG-TR
Visa detalj Datablad

SY10ELT21ZG-TR

Product Overview

Category

SY10ELT21ZG-TR belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for signal transmission and processing.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Small package size

Package

SY10ELT21ZG-TR is available in a small surface mount package.

Essence

The essence of this product lies in its ability to transmit and process signals efficiently in high-speed electronic circuits.

Packaging/Quantity

SY10ELT21ZG-TR is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 3.3V
  • Input Voltage Range: -2.0V to +5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Output Current: ±50mA
  • Propagation Delay: 400ps (typical)
  • Rise/Fall Time: 100ps (typical)

Detailed Pin Configuration

SY10ELT21ZG-TR has a total of 8 pins:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. IN+ - Positive input signal
  4. IN- - Negative input signal
  5. Q - Output signal
  6. /Q - Complementary output signal
  7. VBB - Bias voltage input
  8. NC - No connection

Functional Features

  • Differential input and output
  • High-speed ECL logic
  • Compatible with various logic families
  • Built-in bias voltage generator

Advantages

  • High-speed operation allows for fast signal transmission
  • Low power consumption reduces energy usage
  • Wide operating voltage range provides flexibility in different applications
  • Small package size saves space on circuit boards

Disadvantages

  • Limited compatibility with non-ECL logic families
  • Higher cost compared to some alternative models

Working Principles

SY10ELT21ZG-TR operates based on Emitter-Coupled Logic (ECL) technology. It uses differential input signals and generates complementary output signals, allowing for high-speed and low-power signal transmission.

Detailed Application Field Plans

SY10ELT21ZG-TR is commonly used in the following applications:

  1. High-speed data communication systems
  2. Digital signal processing circuits
  3. Clock distribution networks
  4. Test and measurement equipment
  5. Radar and sonar systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SY10ELT21ZG-TR are:

  1. MC100ELT21 - Manufactured by ON Semiconductor
  2. 74FCT521 - Manufactured by Integrated Device Technology
  3. SN65ELT21 - Manufactured by Texas Instruments

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 408 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SY10ELT21ZG-TR i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SY10ELT21ZG-TR in technical solutions:

  1. Question: What is the purpose of the SY10ELT21ZG-TR?
    Answer: The SY10ELT21ZG-TR is a high-speed differential receiver designed for use in various communication and data transmission systems.

  2. Question: What is the maximum data rate supported by the SY10ELT21ZG-TR?
    Answer: The SY10ELT21ZG-TR can support data rates up to 3.5 Gbps, making it suitable for high-speed applications.

  3. Question: Can the SY10ELT21ZG-TR be used in both single-ended and differential signaling applications?
    Answer: No, the SY10ELT21ZG-TR is specifically designed for differential signaling applications and cannot be used with single-ended signals.

  4. Question: What is the power supply voltage range for the SY10ELT21ZG-TR?
    Answer: The SY10ELT21ZG-TR operates with a power supply voltage range of -4.2V to -5.7V, making it compatible with standard ECL logic levels.

  5. Question: Does the SY10ELT21ZG-TR have built-in termination resistors?
    Answer: No, the SY10ELT21ZG-TR does not have built-in termination resistors. External termination resistors should be used as per the system requirements.

  6. Question: Can the SY10ELT21ZG-TR be used in high-temperature environments?
    Answer: Yes, the SY10ELT21ZG-TR is designed to operate in a wide temperature range from -40°C to +85°C, making it suitable for various industrial and automotive applications.

  7. Question: What is the output voltage swing of the SY10ELT21ZG-TR?
    Answer: The SY10ELT21ZG-TR has a typical output voltage swing of 800 mV, which can be adjusted using external resistors.

  8. Question: Is the SY10ELT21ZG-TR compatible with other ECL logic families?
    Answer: Yes, the SY10ELT21ZG-TR is compatible with other ECL logic families, allowing for easy integration into existing systems.

  9. Question: Can the SY10ELT21ZG-TR be used in both transmitter and receiver applications?
    Answer: No, the SY10ELT21ZG-TR is specifically designed for receiver applications. For transmitter applications, a complementary ECL driver should be used.

  10. Question: Are there any specific layout considerations for using the SY10ELT21ZG-TR?
    Answer: Yes, proper PCB layout techniques should be followed to minimize noise and ensure signal integrity. The datasheet provides guidelines for layout and decoupling capacitor placement.

Please note that these answers are general and may vary depending on the specific requirements and application of the SY10ELT21ZG-TR in a technical solution.