Maxim Integrated
Bild kan vara representation.
Se specifikationer för produktinformation.
MAX34463AA00+T
Visa detalj Datablad

MAX34463AA00+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TDFN (Thin Dual Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Maximum Output Current: 1A
  • Quiescent Current: 20µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX34463AA00+T has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator

Functional Features

  • High Efficiency: The MAX34463AA00+T offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 20µA, it ensures minimal power consumption during standby or low-load conditions.
  • Power Good Indicator: The integrated Power Good (PG) indicator provides a signal indicating when the output voltage is within the specified range.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Compact package size - Power Good indicator for easy monitoring

Disadvantages: - Limited maximum output current (1A)

Working Principles

The MAX34463AA00+T is a voltage regulator IC that converts an input voltage in the range of 2.7V to 5.5V to a regulated output voltage between 0.6V and 3.6V. It utilizes a switching regulator topology to achieve high efficiency power conversion. The feedback pin (FB) is used to regulate the output voltage, while the enable pin (EN) controls the device's operation.

Detailed Application Field Plans

The MAX34463AA00+T is commonly used in various applications requiring power management, such as:

  1. Portable Electronic Devices: It can be used to regulate the voltage for smartphones, tablets, portable gaming consoles, etc.
  2. IoT Devices: It is suitable for powering low-power IoT devices, ensuring efficient energy utilization.
  3. Battery-Powered Systems: The IC can be employed in battery-powered systems to regulate the voltage and extend battery life.

Detailed and Complete Alternative Models

  1. MAX34464AA00+T: Similar to MAX34463AA00+T, but with a higher maximum output current of 2A.
  2. MAX34465AA00+T: Offers additional features like adjustable output voltage and thermal shutdown protection.

Note: This is not an exhaustive list, and there may be other alternative models available from different manufacturers.

Word count: 314 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MAX34463AA00+T i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MAX34463AA00+T in technical solutions:

  1. Q: What is the MAX34463AA00+T?
    A: The MAX34463AA00+T is a high-accuracy, low-power energy measurement system-on-chip (SoC) designed for power monitoring applications.

  2. Q: What are the key features of the MAX34463AA00+T?
    A: The key features include high-accuracy energy measurement, wide dynamic range, low-power operation, integrated ADCs, and flexible communication interfaces.

  3. Q: How can I use the MAX34463AA00+T in my technical solution?
    A: You can use the MAX34463AA00+T to measure and monitor energy consumption in various applications such as smart meters, industrial automation, building management systems, and power distribution units.

  4. Q: What is the accuracy of the energy measurement provided by the MAX34463AA00+T?
    A: The MAX34463AA00+T offers high accuracy with better than 0.1% error over a wide dynamic range.

  5. Q: Can I interface the MAX34463AA00+T with microcontrollers or other devices?
    A: Yes, the MAX34463AA00+T provides multiple communication interfaces including SPI and I2C, allowing easy integration with microcontrollers and other devices.

  6. Q: Does the MAX34463AA00+T support single-phase or three-phase energy measurement?
    A: The MAX34463AA00+T supports both single-phase and three-phase energy measurement, making it suitable for a wide range of applications.

  7. Q: What is the power supply requirement for the MAX34463AA00+T?
    A: The MAX34463AA00+T operates from a single 3.3V power supply.

  8. Q: Can I measure other parameters besides energy using the MAX34463AA00+T?
    A: Yes, the MAX34463AA00+T provides additional measurements such as voltage, current, power factor, and frequency.

  9. Q: Is the MAX34463AA00+T suitable for low-power applications?
    A: Yes, the MAX34463AA00+T is designed for low-power operation, making it suitable for battery-powered or energy-efficient devices.

  10. Q: Are there any evaluation kits or reference designs available for the MAX34463AA00+T?
    A: Yes, Maxim Integrated provides evaluation kits and reference designs to help developers quickly prototype and integrate the MAX34463AA00+T into their technical solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes for detailed information.