Maxim Integrated
Bild kan vara representation.
Se specifikationer för produktinformation.
MAX17710G+T
Visa detalj Datablad

MAX17710G+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: TDFN-EP (4mm x 4mm)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 2A
  • Quiescent Current: 17µA
  • Switching Frequency: 1MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX17710G+T features a 16-pin TDFN-EP package with the following pin configuration:

  1. VIN: Input Voltage
  2. EN: Enable Pin
  3. FB: Feedback Pin
  4. GND: Ground
  5. PGND: Power Ground
  6. SW: Switch Node
  7. LX: Inductor Connection
  8. VCC: Supply Voltage
  9. SS/TRK: Soft-Start/Tracking Control
  10. COMP: Compensation Pin
  11. BST: Bootstrap Capacitor Connection
  12. AGND: Analog Ground
  13. PG: Power Good Indicator
  14. UVLO: Undervoltage Lockout
  15. OVLO: Overvoltage Lockout
  16. VOUT: Output Voltage

Functional Features

  • High Efficiency: The MAX17710G+T offers high efficiency power conversion, minimizing energy loss during voltage regulation.
  • Low Quiescent Current: With a quiescent current of only 17µA, the IC ensures minimal power consumption during standby or idle mode.
  • Wide Input Voltage Range: The device can handle input voltages ranging from 4.5V to 60V, providing flexibility in various applications.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low quiescent current for reduced power consumption - Wide input voltage range for versatility

Disadvantages: - Limited maximum output current of 2A - Relatively high switching frequency of 1MHz

Working Principles

The MAX17710G+T is a voltage regulator IC that utilizes a step-down (buck) topology. It converts the input voltage to a lower, regulated output voltage. The device employs pulse-width modulation (PWM) control to achieve efficient power conversion. It also incorporates various protection features such as undervoltage lockout (UVLO) and overvoltage lockout (OVLO) to ensure safe operation.

Detailed Application Field Plans

The MAX17710G+T finds applications in various fields, including but not limited to:

  1. Automotive: Power management for automotive electronics, such as infotainment systems, lighting modules, and sensors.
  2. Industrial: Voltage regulation for industrial automation equipment, motor drives, and control systems.
  3. Telecommunications: Power supply solutions for telecom infrastructure, base stations, and network equipment.
  4. Consumer Electronics: Voltage regulation for portable devices, home appliances, and audio/video equipment.

Detailed and Complete Alternative Models

  1. MAX17711G+T: Similar specifications and features, but with a higher maximum output current of 3A.
  2. MAX17712G+T: Comparable characteristics, but offers adjustable output voltage through external resistors.
  3. MAX17713G+T: Integrated IC with additional features like thermal shutdown and fault detection.

Note: These alternative models are suggested based on similar functionality and specifications. It is recommended to refer to the manufacturer's documentation for detailed comparisons and suitability for specific applications.

Word count: 468 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MAX17710G+T i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MAX17710G+T in technical solutions:

  1. Q: What is the MAX17710G+T? A: The MAX17710G+T is a highly integrated power management IC (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of the MAX17710G+T? A: The MAX17710G+T offers multiple voltage regulators, battery charging capabilities, power sequencing, and other essential functions required in many applications.

  3. Q: What technical solutions can benefit from using the MAX17710G+T? A: The MAX17710G+T can be used in a wide range of applications, including portable devices, industrial equipment, automotive systems, and more.

  4. Q: How many voltage regulators does the MAX17710G+T have? A: The MAX17710G+T has four integrated voltage regulators, providing flexibility for powering different components in a system.

  5. Q: Can the MAX17710G+T charge batteries? A: Yes, the MAX17710G+T includes battery charging functionality, making it suitable for applications that require battery-powered operation.

  6. Q: Does the MAX17710G+T support power sequencing? A: Yes, the MAX17710G+T offers power sequencing capabilities, ensuring proper startup and shutdown sequences for different power domains.

  7. Q: What is the input voltage range supported by the MAX17710G+T? A: The MAX17710G+T can operate with an input voltage range of typically 4.5V to 28V, allowing it to work with various power sources.

  8. Q: Is the MAX17710G+T programmable? A: Yes, the MAX17710G+T can be programmed through an I2C interface, enabling customization of various parameters and settings.

  9. Q: Does the MAX17710G+T have built-in protection features? A: Yes, the MAX17710G+T incorporates multiple protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  10. Q: Where can I find more information about using the MAX17710G+T in technical solutions? A: You can refer to the MAX17710G+T datasheet and application notes provided by the manufacturer for detailed information on its usage and implementation in different applications.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to consult the product documentation and seek expert advice when designing with the MAX17710G+T or any other component.