Maxim Integrated
Bild kan vara representation.
Se specifikationer för produktinformation.
MAX17006BETP+T
Visa detalj Datablad

MAX17006BETP+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Small Package Size
  • Package: 16-TDFN (3x3mm)
  • Essence: Power Management IC for Battery-Powered Applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.5V to VIN
  • Quiescent Current: 6µA (typical)
  • Switching Frequency: 1MHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX17006BETP+T has the following pin configuration:

  1. VCC: Power Supply Input
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. LX: Switch Node
  6. PGND: Power Ground
  7. SS/TRK: Soft-Start/Tracking Pin
  8. BST: Boost Pin

Functional Features

  • High efficiency power management solution
  • Low quiescent current for improved battery life
  • Integrated synchronous step-up DC-DC converter
  • Adjustable output voltage
  • Soft-start and tracking functionality
  • Overcurrent and overtemperature protection

Advantages and Disadvantages

Advantages: - High efficiency leads to longer battery life - Small package size allows for space-constrained applications - Wide input voltage range provides flexibility in power source selection - Integrated protection features enhance system reliability

Disadvantages: - Limited output voltage range may not be suitable for all applications - Higher cost compared to non-integrated power management solutions

Working Principles

The MAX17006BETP+T is a power management IC designed for battery-powered applications. It incorporates a synchronous step-up DC-DC converter that efficiently boosts the input voltage to a higher output voltage. The device operates with a low quiescent current, minimizing power consumption when the load is light.

The IC features an adjustable output voltage, allowing it to be tailored to specific application requirements. Soft-start and tracking functionality ensure smooth startup and operation. The MAX17006BETP+T also includes overcurrent and overtemperature protection mechanisms to safeguard the system from potential faults.

Detailed Application Field Plans

The MAX17006BETP+T is suitable for various battery-powered applications, including but not limited to: - Portable electronic devices - Wearable devices - IoT (Internet of Things) devices - Wireless sensor networks - Medical devices - Handheld instruments

Detailed and Complete Alternative Models

  1. MAX17006AETP+T: Similar specifications and features, but with a different package (16-TQFN)
  2. MAX17006CETP+T: Higher output voltage range, suitable for specific applications requiring higher voltages
  3. MAX17006DETJ+T: Lower quiescent current, ideal for ultra-low power applications

These alternative models offer similar functionality and can be considered based on specific project requirements.

Word count: 305 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MAX17006BETP+T i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MAX17006BETP+T in technical solutions:

  1. Q: What is the MAX17006BETP+T? A: The MAX17006BETP+T is a fuel gauge IC (Integrated Circuit) designed for accurately measuring the remaining capacity of a single-cell lithium-ion battery.

  2. Q: What is the operating voltage range of the MAX17006BETP+T? A: The operating voltage range of the MAX17006BETP+T is typically from 2.7V to 4.5V.

  3. Q: How does the MAX17006BETP+T measure battery capacity? A: The MAX17006BETP+T uses a patented ModelGauge m5 algorithm that combines the measurement of battery voltage, current, temperature, and other parameters to estimate the remaining capacity.

  4. Q: Can the MAX17006BETP+T be used with different battery chemistries? A: No, the MAX17006BETP+T is specifically designed for use with single-cell lithium-ion batteries.

  5. Q: What is the accuracy of the MAX17006BETP+T's capacity measurement? A: The MAX17006BETP+T has an accuracy of ±1% for capacity measurements.

  6. Q: Does the MAX17006BETP+T support battery pack balancing? A: No, the MAX17006BETP+T does not have built-in support for battery pack balancing. It is primarily focused on accurate capacity measurement.

  7. Q: Can the MAX17006BETP+T communicate with a microcontroller or host system? A: Yes, the MAX17006BETP+T supports I2C communication, allowing it to interface with a microcontroller or host system.

  8. Q: What is the typical power consumption of the MAX17006BETP+T? A: The typical power consumption of the MAX17006BETP+T is around 6µA during active operation and less than 1µA in standby mode.

  9. Q: Does the MAX17006BETP+T provide any protection features for the battery? A: Yes, the MAX17006BETP+T includes overvoltage and undervoltage protection to prevent damage to the battery.

  10. Q: Can the MAX17006BETP+T be used in portable devices like smartphones or wearables? A: Yes, the MAX17006BETP+T is commonly used in portable devices where accurate battery capacity measurement is crucial for user experience and device performance.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.