Maxim Integrated
Bild kan vara representation.
Se specifikationer för produktinformation.
MAX14641ETA+T
Visa detalj Datablad

MAX14641ETA+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-efficiency, Low-power consumption
  • Package: 8-pin TDFN (Thin Dual Flat No-Lead) package
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Maximum Output Current: 600mA
  • Quiescent Current: 17µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX14641ETA+T features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching node pin
  6. PG: Power Good pin
  7. VOUT: Output voltage pin
  8. BST: Boost capacitor connection pin

Functional Features

  • High efficiency with up to 95% power conversion
  • Low quiescent current for improved battery life
  • Integrated power-good output for system monitoring
  • Overcurrent and thermal protection for enhanced safety
  • Soft-start feature to minimize inrush current

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range allows for versatile applications - Small form factor package enables space-saving designs - Integrated protection features enhance system reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The MAX14641ETA+T is a voltage regulator that converts the input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) controls the regulator's operation, allowing for power-saving modes when not in use.

Detailed Application Field Plans

The MAX14641ETA+T is commonly used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

  1. MAX14640ETA+T: Similar specifications and features, but with a different pin configuration.
  2. MAX14642ETA+T: Higher maximum output current of 1A, suitable for more demanding applications.
  3. MAX14643ETA+T: Lower quiescent current of 10µA, ideal for ultra-low-power designs.

These alternative models provide options based on specific requirements and design constraints.

In conclusion, the MAX14641ETA+T is a highly efficient voltage regulator IC designed for power management applications. Its small package size, integrated protection features, and wide input voltage range make it suitable for various portable and battery-powered devices. However, its limited maximum output current and operating temperature range should be considered when selecting this IC for specific applications.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MAX14641ETA+T i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MAX14641ETA+T in technical solutions:

  1. Q: What is the MAX14641ETA+T? A: The MAX14641ETA+T is a highly integrated, low-power, and compact USB charger detection and power switch IC.

  2. Q: What are the key features of the MAX14641ETA+T? A: The key features include USB charger detection, automatic charging current selection, overvoltage protection, thermal shutdown, and fault reporting.

  3. Q: How does the USB charger detection feature work? A: The MAX14641ETA+T can detect the type of USB charger connected (e.g., standard USB, Apple charger) and adjust the charging current accordingly.

  4. Q: Can the MAX14641ETA+T handle multiple USB ports? A: Yes, the MAX14641ETA+T can be used to manage multiple USB ports simultaneously, making it suitable for applications with multiple charging ports.

  5. Q: Does the MAX14641ETA+T provide overvoltage protection? A: Yes, the MAX14641ETA+T has built-in overvoltage protection to safeguard the connected devices from voltage spikes or surges.

  6. Q: What is the maximum charging current supported by the MAX14641ETA+T? A: The MAX14641ETA+T supports charging currents up to 2.1A, which is ideal for fast charging applications.

  7. Q: Can the MAX14641ETA+T be used in battery-powered devices? A: Yes, the MAX14641ETA+T is commonly used in battery-powered devices like smartphones, tablets, portable speakers, etc., to manage the charging process.

  8. Q: Is the MAX14641ETA+T compatible with different battery chemistries? A: Yes, the MAX14641ETA+T is compatible with various battery chemistries, including lithium-ion (Li-ion) and lithium-polymer (LiPo).

  9. Q: Does the MAX14641ETA+T have any built-in protection against overheating? A: Yes, the MAX14641ETA+T incorporates thermal shutdown protection to prevent overheating and ensure safe operation.

  10. Q: How can I obtain the datasheet and technical documentation for the MAX14641ETA+T? A: The datasheet and other technical documentation for the MAX14641ETA+T can be obtained from the manufacturer's website or authorized distributors.