Maxim Integrated
Bild kan vara representation.
Se specifikationer för produktinformation.
MAX1046BETX+T
Visa detalj Datablad

MAX1046BETX+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, small package size
  • Package: 6-pin SOT-23
  • Essence: Linear regulator with adjustable output voltage
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.25V to 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 120mV at 100mA load
  • Quiescent Current: 50µA
  • Line Regulation: ±0.05% typical
  • Load Regulation: ±0.1% typical
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX1046BETX+T has the following pin configuration:

  1. GND (Ground)
  2. FB (Feedback)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)
  6. VIN (Input Voltage)

Functional Features

  • Adjustable output voltage through external resistors
  • Low dropout voltage for efficient power conversion
  • Low quiescent current for improved energy efficiency
  • Thermal shutdown protection
  • Short-circuit and reverse polarity protection

Advantages and Disadvantages

Advantages

  • High efficiency due to low dropout voltage
  • Small package size allows for space-saving designs
  • Wide input voltage range enables versatile applications
  • Excellent line and load regulation for stable output voltage

Disadvantages

  • Limited maximum output current of 150mA
  • Not suitable for high-power applications

Working Principles

The MAX1046BETX+T is a linear voltage regulator that provides an adjustable output voltage. It operates by comparing the feedback voltage (FB) with a reference voltage to regulate the output voltage (VOUT). The enable pin (EN) controls the device's operation, allowing for power-saving modes when not in use. The IC incorporates various protection features such as thermal shutdown, short-circuit, and reverse polarity protection.

Detailed Application Field Plans

The MAX1046BETX+T is commonly used in applications where a stable and adjustable voltage supply is required. Some of the typical application fields include:

  1. Battery-powered devices: Portable electronics, handheld instruments, and battery chargers.
  2. Automotive electronics: Infotainment systems, dashboard displays, and lighting control modules.
  3. Industrial equipment: Sensors, actuators, and control systems.
  4. Communication devices: Wireless routers, modems, and network switches.
  5. Consumer electronics: Audio/video equipment, gaming consoles, and digital cameras.

Detailed and Complete Alternative Models

  • LM317: Adjustable voltage regulator with higher maximum output current.
  • LT1763: Low dropout voltage regulator with ultra-low quiescent current.
  • TPS7A4700: High-performance voltage regulator with wide input voltage range.

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 346 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MAX1046BETX+T i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MAX1046BETX+T in technical solutions:

  1. Q: What is the MAX1046BETX+T? A: The MAX1046BETX+T is a precision, low-power, analog-to-digital converter (ADC) with a 10-bit resolution.

  2. Q: What is the operating voltage range of the MAX1046BETX+T? A: The MAX1046BETX+T operates from a single supply voltage ranging from 2.7V to 5.25V.

  3. Q: What is the maximum sampling rate of the MAX1046BETX+T? A: The MAX1046BETX+T has a maximum sampling rate of 200 kilosamples per second (ksps).

  4. Q: Can the MAX1046BETX+T be used for temperature sensing applications? A: Yes, the MAX1046BETX+T can be used for temperature sensing applications by interfacing it with a temperature sensor.

  5. Q: Does the MAX1046BETX+T have an internal reference voltage? A: No, the MAX1046BETX+T requires an external reference voltage for its operation.

  6. Q: What is the typical power consumption of the MAX1046BETX+T? A: The typical power consumption of the MAX1046BETX+T is around 0.8mW.

  7. Q: Can the MAX1046BETX+T operate in a noisy environment? A: Yes, the MAX1046BETX+T features a built-in noise rejection circuitry that allows it to operate effectively in noisy environments.

  8. Q: What is the interface of the MAX1046BETX+T? A: The MAX1046BETX+T has a serial interface that can be easily connected to microcontrollers or other digital devices.

  9. Q: Can the MAX1046BETX+T be used in battery-powered applications? A: Yes, the low-power consumption and wide operating voltage range make the MAX1046BETX+T suitable for battery-powered applications.

  10. Q: Are there any evaluation boards available for the MAX1046BETX+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs for the MAX1046BETX+T, which can help in the development and testing of technical solutions.

Please note that these answers are general and may vary depending on specific application requirements.