Linear Technology/Analog Devices
Bild kan vara representation.
Se specifikationer för produktinformation.
LTC4217CDHC-12#TRPBF
Visa detalj Datablad

LTC4217CDHC-12#TRPBF

Product Overview

Category

LTC4217CDHC-12#TRPBF belongs to the category of integrated circuits (ICs) and specifically falls under the power management ICs.

Use

This product is primarily used for power distribution and protection in electronic devices. It provides various features to ensure safe and efficient power delivery.

Characteristics

  • Power management IC
  • Provides power distribution and protection
  • High efficiency
  • Compact size
  • Wide input voltage range
  • Overcurrent and overvoltage protection
  • Adjustable current limit

Package

LTC4217CDHC-12#TRPBF comes in a small form factor package, typically a 12-pin ceramic leadless chip carrier (CLCC).

Essence

The essence of LTC4217CDHC-12#TRPBF lies in its ability to manage power distribution and protect electronic devices from potential damage caused by overcurrent or overvoltage conditions.

Packaging/Quantity

This product is usually packaged in reels or tubes, with a typical quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.9V to 36V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Continuous Current: 3A
  • Adjustable Current Limit: 0.5A to 3A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

  1. VIN: Input voltage
  2. GND: Ground
  3. VOUT: Output voltage
  4. ILIM: Current limit adjustment
  5. FLT: Fault indicator
  6. EN: Enable control
  7. PG: Power good indicator
  8. SS: Soft-start capacitor
  9. FB: Feedback voltage
  10. VREF: Reference voltage
  11. NC: No connection
  12. NC: No connection

Functional Features

  • Overcurrent protection: LTC4217CDHC-12#TRPBF monitors the output current and limits it to a user-defined value, preventing damage to the device.
  • Overvoltage protection: It safeguards the connected device by monitoring the output voltage and shutting down if it exceeds a specified threshold.
  • Power good indicator: The PG pin provides a signal indicating that the output voltage is within the desired range.
  • Fault indicator: The FLT pin signals any fault condition, such as overcurrent or overvoltage, allowing for prompt troubleshooting.
  • Enable control: The EN pin enables or disables the power supply, providing flexibility in power management.

Advantages and Disadvantages

Advantages

  • Efficient power distribution and protection
  • Wide input voltage range allows compatibility with various power sources
  • Adjustable current limit offers customization based on specific requirements
  • Compact size enables integration into space-constrained designs

Disadvantages

  • Limited maximum continuous current may not be suitable for high-power applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

LTC4217CDHC-12#TRPBF operates by continuously monitoring the input and output voltages and currents. It compares these values to predefined thresholds and takes appropriate actions to ensure safe power delivery. The adjustable current limit feature allows users to set the maximum current allowed, while the overvoltage protection shuts down the output if the voltage exceeds the specified limit.

Detailed Application Field Plans

LTC4217CDHC-12#TRPBF finds applications in various electronic devices requiring power distribution and protection. Some potential fields of application include:

  1. Consumer electronics: Smartphones, tablets, laptops, and other portable devices can benefit from the power management and protection features offered by this IC.
  2. Industrial equipment: Power supplies, motor control systems, and automation devices can utilize LTC4217CDHC-12#TRPBF to ensure reliable power distribution and safeguard against faults.
  3. Automotive electronics: In-car infotainment systems, advanced driver-assistance systems (ADAS), and other automotive electronics can benefit from the overcurrent and overvoltage protection provided by this IC.

Detailed and Complete Alternative Models

  1. LTC4217CDHC-5#TRPBF: Similar to LTC4217CDHC-12#TRPBF but with a maximum continuous current of 5A.
  2. LTC4217CDHC-15#TRPBF: Similar to LTC4217CDHC-12#TRPBF but with a maximum continuous current of 15A.
  3. LTC4217CDHC-24#TRPBF: Similar to LTC4217CDHC-12#TRPBF but with a maximum continuous current of 24A.

These alternative models offer higher current capabilities while maintaining similar functionality and features as LTC4217CDHC-12#TRPBF.

In conclusion, LTC

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LTC4217CDHC-12#TRPBF i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LTC4217CDHC-12#TRPBF in technical solutions:

  1. Q: What is LTC4217CDHC-12#TRPBF? A: LTC4217CDHC-12#TRPBF is a specific model of power management IC (integrated circuit) designed for hot-swappable applications.

  2. Q: What are the key features of LTC4217CDHC-12#TRPBF? A: Some key features include overcurrent protection, undervoltage lockout, adjustable current limit, and thermal shutdown.

  3. Q: What is the maximum input voltage supported by LTC4217CDHC-12#TRPBF? A: The maximum input voltage supported is 16V.

  4. Q: How does LTC4217CDHC-12#TRPBF provide overcurrent protection? A: LTC4217CDHC-12#TRPBF monitors the current flowing through the load and shuts off the power if it exceeds a set threshold.

  5. Q: Can LTC4217CDHC-12#TRPBF be used in battery-powered applications? A: Yes, LTC4217CDHC-12#TRPBF can be used in battery-powered applications as long as the input voltage is within the specified range.

  6. Q: Is LTC4217CDHC-12#TRPBF suitable for high-power applications? A: LTC4217CDHC-12#TRPBF is designed for low to moderate power applications. For high-power applications, it is recommended to use a different power management IC.

  7. Q: Can LTC4217CDHC-12#TRPBF be used with both AC and DC power sources? A: Yes, LTC4217CDHC-12#TRPBF can be used with both AC and DC power sources as long as the voltage is within the specified range.

  8. Q: How does LTC4217CDHC-12#TRPBF handle thermal management? A: LTC4217CDHC-12#TRPBF has built-in thermal shutdown protection that activates if the temperature exceeds a certain threshold, preventing damage to the IC.

  9. Q: Can LTC4217CDHC-12#TRPBF be used in automotive applications? A: Yes, LTC4217CDHC-12#TRPBF is suitable for automotive applications as it can handle the required voltage levels and provides overcurrent protection.

  10. Q: Are there any specific application notes or reference designs available for LTC4217CDHC-12#TRPBF? A: Yes, Linear Technology (now part of Analog Devices) provides application notes and reference designs on their website that can help with the implementation of LTC4217CDHC-12#TRPBF in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.