Linear Technology/Analog Devices
Bild kan vara representation.
Se specifikationer för produktinformation.
LTC2857IDD-2#PBF
Visa detalj Datablad

LTC2857IDD-2#PBF

Product Overview

Category

The LTC2857IDD-2#PBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in various electronic devices and systems for signal transmission and communication purposes.

Characteristics

  • The LTC2857IDD-2#PBF is a low-power differential bus transceiver.
  • It operates with a supply voltage range of 3V to 5.5V.
  • This IC is designed to provide reliable data transmission over long distances.
  • It offers high noise immunity and robustness against electromagnetic interference (EMI).
  • The LTC2857IDD-2#PBF supports data rates up to 20Mbps.

Package

The LTC2857IDD-2#PBF is available in a small form factor package, known as DFN (Dual Flat No-Lead) package.

Essence

The essence of this product lies in its ability to facilitate secure and efficient data communication in various electronic systems.

Packaging/Quantity

The LTC2857IDD-2#PBF is typically packaged in reels or tubes, containing a specific quantity of ICs per package.

Specifications

  • Supply Voltage Range: 3V to 5.5V
  • Data Rate: Up to 20Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 10
  • Package Type: DFN

Detailed Pin Configuration

  1. VCC: Power supply pin
  2. GND: Ground pin
  3. RO: Receiver output pin
  4. RE: Receiver enable pin
  5. DE: Driver enable pin
  6. DI: Driver input pin
  7. YZ: Bus state output pin
  8. B: Bus input/output pin
  9. A: Bus input/output pin
  10. VCC: Power supply pin

Functional Features

  • Differential Bus Transceiver: Enables bidirectional data transmission over a differential bus.
  • Receiver Enable (RE) Pin: Allows the receiver to be enabled or disabled as needed.
  • Driver Enable (DE) Pin: Controls the driver's output, enabling or disabling transmission.
  • High Noise Immunity: Provides reliable data transmission in noisy environments.
  • EMI Robustness: Protects against electromagnetic interference for improved signal integrity.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Wide supply voltage range
  • High-speed data transmission capability
  • Compact package size
  • Strong noise immunity

Disadvantages

  • Limited number of pins for I/O connections
  • Requires additional external components for complete functionality

Working Principles

The LTC2857IDD-2#PBF operates based on the principles of differential signaling. It uses two complementary signals, A and B, to transmit data over a differential bus. The receiver compares the voltage difference between these signals to determine the transmitted data. The driver amplifies the input signals and drives them onto the bus.

Detailed Application Field Plans

The LTC2857IDD-2#PBF finds applications in various fields, including:

  1. Industrial Automation: Used for communication between sensors, actuators, and control systems in industrial automation processes.
  2. Automotive Electronics: Enables reliable data transmission in automotive systems, such as CAN (Controller Area Network) buses.
  3. Telecommunications: Facilitates secure and high-speed data communication in telecommunication networks.
  4. Medical Devices: Ensures robust and noise-immune data transmission in medical equipment and devices.
  5. Consumer Electronics: Used in audio/video equipment, gaming consoles, and other consumer electronic devices requiring reliable data transmission.

Detailed and Complete Alternative Models

  1. LTC2870: Differential bus transceiver with higher data rate capabilities.
  2. MAX485: Low-power transceiver with similar functionality.
  3. SN65HVD11: Robust differential bus transceiver suitable for industrial applications.
  4. ADM3053: Isolated CAN transceiver for applications requiring galvanic isolation.

These alternative models offer similar features and can be considered as substitutes for the LTC2857IDD-2#PBF in various applications.

Word count: 570 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LTC2857IDD-2#PBF i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LTC2857IDD-2#PBF in technical solutions:

  1. Q: What is the LTC2857IDD-2#PBF? A: The LTC2857IDD-2#PBF is a high-speed RS485/RS422 transceiver IC manufactured by Linear Technology (now part of Analog Devices). It is used for long-distance communication in industrial applications.

  2. Q: What is the operating voltage range of LTC2857IDD-2#PBF? A: The operating voltage range of LTC2857IDD-2#PBF is from 3V to 5.5V.

  3. Q: What is the maximum data rate supported by LTC2857IDD-2#PBF? A: The maximum data rate supported by LTC2857IDD-2#PBF is 20Mbps.

  4. Q: Can LTC2857IDD-2#PBF be used for half-duplex communication? A: Yes, LTC2857IDD-2#PBF can be used for both half-duplex and full-duplex communication.

  5. Q: Does LTC2857IDD-2#PBF support bus-powered applications? A: Yes, LTC2857IDD-2#PBF supports bus-powered applications as it has a low quiescent current.

  6. Q: Is LTC2857IDD-2#PBF compatible with standard RS485/RS422 protocols? A: Yes, LTC2857IDD-2#PBF is fully compatible with standard RS485/RS422 protocols.

  7. Q: Can LTC2857IDD-2#PBF handle ESD protection? A: Yes, LTC2857IDD-2#PBF has built-in ESD protection up to ±15kV HBM.

  8. Q: What is the typical operating temperature range of LTC2857IDD-2#PBF? A: The typical operating temperature range of LTC2857IDD-2#PBF is from -40°C to 85°C.

  9. Q: Does LTC2857IDD-2#PBF have a fail-safe receiver? A: Yes, LTC2857IDD-2#PBF has a fail-safe receiver that ensures a high output state when the inputs are open or shorted.

  10. Q: Can LTC2857IDD-2#PBF be used in harsh industrial environments? A: Yes, LTC2857IDD-2#PBF is designed to operate reliably in harsh industrial environments with its rugged construction and high noise immunity.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.