Intersil
Bild kan vara representation.
Se specifikationer för produktinformation.
ISL54064IRTZ-T
Visa detalj Datablad

ISL54064IRTZ-T

Product Overview

Category

ISL54064IRTZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and amplification.

Characteristics

  • High-speed switching capability
  • Low power consumption
  • Wide operating voltage range
  • Small form factor

Package

ISL54064IRTZ-T is available in a small outline package (SOP) with thermal pad.

Essence

The essence of ISL54064IRTZ-T lies in its ability to provide efficient signal switching and amplification in various electronic applications.

Packaging/Quantity

ISL54064IRTZ-T is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • On-Resistance (RON): 0.4Ω (typical)
  • Maximum Operating Frequency: 100MHz
  • Number of Channels: 4
  • Input/Output Voltage Range: -0.3V to VCC+0.3V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL54064IRTZ-T features a 16-pin SOP package with the following pin configuration:

  1. Channel 1 Input
  2. Channel 1 Output
  3. Channel 2 Input
  4. Channel 2 Output
  5. Channel 3 Input
  6. Channel 3 Output
  7. Channel 4 Input
  8. Channel 4 Output
  9. Ground (GND)
  10. Ground (GND)
  11. Power Supply (VCC)
  12. Power Supply (VCC)
  13. Channel 4 Enable
  14. Channel 3 Enable
  15. Channel 2 Enable
  16. Channel 1 Enable

Functional Features

  • High-speed signal switching with minimal delay
  • Low power consumption for energy-efficient operation
  • Wide operating voltage range allows compatibility with various systems
  • Four independent channels for versatile signal routing
  • Enable pins for individual channel control

Advantages and Disadvantages

Advantages

  • Fast switching capability enhances system performance
  • Low power consumption prolongs battery life in portable devices
  • Wide operating voltage range ensures compatibility with different power sources
  • Multiple channels provide flexibility in signal routing

Disadvantages

  • Limited number of channels may not be suitable for applications requiring more than four signal paths
  • Higher cost compared to simpler signal switches

Working Principles

ISL54064IRTZ-T operates based on the principles of solid-state switching. When an input signal is applied to a specific channel, the corresponding output is connected to the input path, allowing the signal to pass through. The enable pins control the activation of each channel, enabling selective signal routing.

Detailed Application Field Plans

ISL54064IRTZ-T finds applications in various electronic systems, including but not limited to: - Audio/video equipment - Communication devices - Industrial automation - Test and measurement instruments - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL54064IRTZ-T include: - ADG1414: Analog Devices - MAX4617: Maxim Integrated - TS5A23157: Texas Instruments - MC74HC4066: ON Semiconductor

These alternative models can be considered based on specific requirements and design considerations.

Word count: 445 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av ISL54064IRTZ-T i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of ISL54064IRTZ-T in technical solutions:

  1. Question: What is ISL54064IRTZ-T?
    Answer: ISL54064IRTZ-T is a high-performance, low-voltage, single-supply, quad SPST (Single-Pole Single-Throw) analog switch.

  2. Question: What is the operating voltage range of ISL54064IRTZ-T?
    Answer: The operating voltage range of ISL54064IRTZ-T is from 1.65V to 5.5V.

  3. Question: What is the maximum current handling capability of each switch in ISL54064IRTZ-T?
    Answer: Each switch in ISL54064IRTZ-T can handle a maximum continuous current of 300mA.

  4. Question: Can ISL54064IRTZ-T be used for bidirectional signal switching?
    Answer: No, ISL54064IRTZ-T is designed for unidirectional signal switching only.

  5. Question: What is the typical on-resistance of each switch in ISL54064IRTZ-T?
    Answer: The typical on-resistance of each switch in ISL54064IRTZ-T is around 0.6Ω.

  6. Question: Is ISL54064IRTZ-T suitable for use in battery-powered devices?
    Answer: Yes, ISL54064IRTZ-T operates at low voltages and has low power consumption, making it suitable for battery-powered devices.

  7. Question: Can ISL54064IRTZ-T be used in audio applications?
    Answer: Yes, ISL54064IRTZ-T has low distortion and excellent audio performance, making it suitable for audio applications.

  8. Question: Does ISL54064IRTZ-T have built-in ESD protection?
    Answer: Yes, ISL54064IRTZ-T has built-in ESD protection up to ±8kV (human body model).

  9. Question: Can ISL54064IRTZ-T be used in high-speed data switching applications?
    Answer: Yes, ISL54064IRTZ-T has a fast switching speed and can be used in high-speed data switching applications.

  10. Question: What is the package type of ISL54064IRTZ-T?
    Answer: ISL54064IRTZ-T is available in a small 16-lead QFN (Quad Flat No-Lead) package.

Please note that these answers are general and may vary depending on the specific application and requirements.