Intersil
Bild kan vara representation.
Se specifikationer för produktinformation.
ISL54064IRTZ
Visa detalj Datablad

ISL54064IRTZ

Product Overview

Category

ISL54064IRTZ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and amplification.

Characteristics

  • High-speed switching capability
  • Low power consumption
  • Small form factor
  • Wide operating voltage range

Package

ISL54064IRTZ is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL54064IRTZ lies in its ability to provide efficient signal switching and amplification in electronic devices.

Packaging/Quantity

ISL54064IRTZ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • On-Resistance: 0.4Ω (typical)
  • Off-Channel Leakage Current: 1nA (maximum)
  • Bandwidth: 200MHz (typical)
  • Input Capacitance: 3pF (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL54064IRTZ has a total of 16 pins, which are configured as follows:

  1. Pin 1: VDD (Power supply)
  2. Pin 2: IN1 (Input 1)
  3. Pin 3: IN2 (Input 2)
  4. Pin 4: GND (Ground)
  5. Pin 5: EN (Enable)
  6. Pin 6: NC (No connection)
  7. Pin 7: NC (No connection)
  8. Pin 8: NC (No connection)
  9. Pin 9: NC (No connection)
  10. Pin 10: NC (No connection)
  11. Pin 11: NC (No connection)
  12. Pin 12: NC (No connection)
  13. Pin 13: OUT (Output)
  14. Pin 14: NC (No connection)
  15. Pin 15: NC (No connection)
  16. Pin 16: VDD (Power supply)

Functional Features

  • High-speed signal switching
  • Low power consumption
  • Wide operating voltage range
  • Built-in protection against overvoltage and overcurrent

Advantages and Disadvantages

Advantages

  • Fast switching capability enhances overall device performance.
  • Low power consumption prolongs battery life in portable devices.
  • Wide operating voltage range allows compatibility with various systems.
  • Built-in protection features safeguard the device from potential damage.

Disadvantages

  • Limited number of available pins for additional functionalities.
  • May require external components for specific applications.

Working Principles

ISL54064IRTZ operates by receiving input signals through IN1 and IN2 pins. The EN pin enables or disables the signal path, controlling the output at the OUT pin. When enabled, the input signals are amplified and switched to the output. The device ensures minimal distortion and low power consumption during operation.

Detailed Application Field Plans

ISL54064IRTZ finds application in various electronic devices, including but not limited to: - Audio amplifiers - Data acquisition systems - Communication equipment - Test and measurement instruments - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL54064IRTZ include: - ADG5404BRUZ - MAX4544EUA+ - CD4053BE - SN74HC4066N

These alternatives can be considered based on specific requirements and system compatibility.

Word count: 399 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av ISL54064IRTZ i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of ISL54064IRTZ in technical solutions:

  1. Q: What is ISL54064IRTZ? A: ISL54064IRTZ is a high-performance, low-voltage, single-supply, quad SPST (Single-Pole Single-Throw) analog switch.

  2. Q: What is the operating voltage range of ISL54064IRTZ? A: The operating voltage range of ISL54064IRTZ is typically between 1.8V and 5.5V.

  3. Q: What is the maximum current handling capability of each switch in ISL54064IRTZ? A: Each switch in ISL54064IRTZ can handle a maximum continuous current of 300mA.

  4. Q: Can ISL54064IRTZ be used for both analog and digital signals? A: Yes, ISL54064IRTZ can be used for both analog and digital signals.

  5. Q: What is the on-resistance of each switch in ISL54064IRTZ? A: The on-resistance of each switch in ISL54064IRTZ is typically around 0.6 ohms.

  6. Q: Is ISL54064IRTZ suitable for bidirectional signal switching? A: No, ISL54064IRTZ is not designed for bidirectional signal switching. It is meant for unidirectional signal routing.

  7. Q: Can ISL54064IRTZ be used in battery-powered applications? A: Yes, ISL54064IRTZ is suitable for battery-powered applications due to its low power consumption and wide operating voltage range.

  8. Q: Does ISL54064IRTZ have built-in protection features? A: Yes, ISL54064IRTZ has built-in ESD (Electrostatic Discharge) protection to safeguard against voltage spikes.

  9. Q: What is the package type of ISL54064IRTZ? A: ISL54064IRTZ is available in a small 16-lead Thin Shrink Small Outline Package (TSSOP).

  10. Q: Can ISL54064IRTZ be used in high-frequency applications? A: Yes, ISL54064IRTZ can be used in high-frequency applications as it has a wide bandwidth and low capacitance.

Please note that these answers are general and may vary depending on specific application requirements.