Bild kan vara representation.
Se specifikationer för produktinformation.
EL5171IS-T13

EL5171IS-T13

Product Overview

  • Category: Integrated Circuit
  • Use: Amplifier
  • Characteristics: High-speed, Low-power, Single Supply
  • Package: SOIC-8
  • Essence: Operational Amplifier
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 2.7V to 12V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 200MHz (typical)
  • Slew Rate: 400V/µs (typical)
  • Quiescent Current: 5.5mA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The EL5171IS-T13 has a standard SOIC-8 package with the following pin configuration:

  1. V-
  2. IN-
  3. IN+
  4. V+
  5. OUT
  6. NC
  7. NC
  8. GND

Functional Features

  • High-speed amplification of input signals
  • Low power consumption for efficient operation
  • Single supply voltage compatibility simplifies circuit design
  • Wide operating temperature range for versatile applications

Advantages

  • High gain bandwidth product enables accurate signal amplification in various applications
  • Low input offset voltage ensures precise signal processing
  • Fast slew rate allows for rapid response to input changes
  • Low quiescent current minimizes power consumption

Disadvantages

  • Limited number of available pins restricts the versatility of the device
  • Single supply voltage operation may limit compatibility with certain systems

Working Principles

The EL5171IS-T13 is an operational amplifier that amplifies input signals with high speed and low power consumption. It operates on a single supply voltage, making it suitable for a wide range of applications. The amplifier's internal circuitry ensures accurate amplification and signal processing.

Detailed Application Field Plans

The EL5171IS-T13 is commonly used in the following application fields:

  1. Audio amplification
  2. Signal conditioning
  3. Data acquisition systems
  4. Instrumentation
  5. Communication systems

Detailed and Complete Alternative Models

  1. EL5170IS-T13: Similar specifications and features, but with a different pin configuration (SOIC-8 package)
  2. EL5172IS-T13: Higher gain bandwidth product and faster slew rate, suitable for more demanding applications (SOIC-8 package)
  3. EL5173IS-T13: Lower power consumption and wider operating temperature range, ideal for low-power and extreme temperature environments (SOIC-8 package)

(Note: These alternative models are from the same series and have similar characteristics, but may vary in specific performance parameters.)

This concludes the encyclopedia entry for the EL5171IS-T13 operational amplifier.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av EL5171IS-T13 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of EL5171IS-T13 in technical solutions:

1. What is EL5171IS-T13? EL5171IS-T13 is a high-speed operational amplifier (op-amp) designed for use in various technical applications.

2. What is the voltage supply range for EL5171IS-T13? The voltage supply range for EL5171IS-T13 is typically between ±5V and ±15V.

3. What is the bandwidth of EL5171IS-T13? EL5171IS-T13 has a bandwidth of 200 MHz, making it suitable for high-frequency applications.

4. Can EL5171IS-T13 be used as a voltage follower? Yes, EL5171IS-T13 can be used as a voltage follower to buffer and amplify signals without introducing significant distortion.

5. Is EL5171IS-T13 suitable for low-power applications? No, EL5171IS-T13 is not specifically designed for low-power applications. It is more suitable for high-performance applications where power consumption is not a primary concern.

6. Can EL5171IS-T13 be used in audio amplification circuits? Yes, EL5171IS-T13 can be used in audio amplification circuits, especially for high-fidelity audio applications due to its wide bandwidth.

7. Does EL5171IS-T13 have built-in protection features? No, EL5171IS-T13 does not have built-in protection features such as overvoltage or overcurrent protection. External protection circuitry may be required.

8. What is the input voltage range for EL5171IS-T13? The input voltage range for EL5171IS-T13 is typically between -Vs + 1.5V and +Vs - 1.5V, where Vs is the supply voltage.

9. Can EL5171IS-T13 be used in single-supply applications? Yes, EL5171IS-T13 can be used in single-supply applications by connecting the negative supply pin (V-) to ground and providing a positive supply voltage.

10. Is EL5171IS-T13 suitable for precision applications? EL5171IS-T13 is not specifically designed for precision applications. It is more commonly used in high-speed and high-frequency applications where precision requirements may be lower.

Please note that these answers are general and may vary depending on specific application requirements.