Infineon Technologies
Bild kan vara representation.
Se specifikationer för produktinformation.
IR21064S
Visa detalj Datablad

IR21064S

Product Overview

Category: Integrated Circuit (IC)

Use: The IR21064S is a high-performance power management IC designed for various applications in the field of electronics. It provides efficient control and regulation of power supply, making it suitable for use in a wide range of devices.

Characteristics: - High efficiency - Low power consumption - Compact size - Reliable performance

Package: The IR21064S comes in a small form factor package, which makes it easy to integrate into electronic circuits. It is available in different package types, such as surface mount and through-hole.

Essence: The essence of the IR21064S lies in its ability to efficiently manage power supply, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity: The IR21064S is typically sold in reels or tubes, depending on the package type. The quantity per reel or tube may vary, but it is commonly available in quantities suitable for both prototyping and mass production.

Specifications

The specifications of the IR21064S include:

  • Input voltage range: 3V to 36V
  • Output voltage range: 1.2V to 24V
  • Maximum output current: 2A
  • Operating temperature range: -40°C to 85°C
  • Switching frequency: 500kHz

Detailed Pin Configuration

The IR21064S has a total of 16 pins, each serving a specific function. The pin configuration is as follows:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. VIN: Input voltage
  4. EN: Enable pin
  5. FB: Feedback pin
  6. COMP: Compensation pin
  7. SS: Soft-start pin
  8. PGND: Power ground
  9. SW: Switch node
  10. LX: Inductor connection
  11. PGND: Power ground
  12. VCC: Power supply input
  13. FB: Feedback pin
  14. COMP: Compensation pin
  15. SS: Soft-start pin
  16. EN: Enable pin

Functional Features

The IR21064S offers several functional features that enhance its performance and usability:

  • Wide Input Voltage Range: The IC can accept a wide range of input voltages, making it suitable for various power supply applications.
  • High Efficiency: The IR21064S incorporates advanced circuitry to ensure high efficiency, minimizing power losses and maximizing energy conversion.
  • Protection Mechanisms: It includes built-in protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown, ensuring the safety and reliability of the connected devices.
  • Adjustable Output Voltage: The output voltage can be easily adjusted using external components, allowing flexibility in meeting specific application requirements.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size enables easy integration into electronic circuits - Reliable performance ensures stable operation - Wide input voltage range allows versatility in application

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Requires external components for precise voltage regulation

Working Principles

The IR21064S operates based on a switching regulator principle. It utilizes a combination of control circuitry, power MOSFETs, and passive components to efficiently regulate the input voltage and provide a stable output voltage. The switching frequency determines how fast the IC switches between different states, enabling efficient power conversion.

Detailed Application Field Plans

The IR21064S finds applications in various fields, including but not limited to: - Consumer electronics - Industrial automation - Automotive electronics - Telecommunications - Renewable energy systems

In consumer electronics, it can be used in power supplies for audio amplifiers, LED lighting, and portable devices. In industrial automation, it can be employed in motor control circuits and power management systems. Automotive electronics can benefit from the IR21064S in applications such as electric vehicle charging stations and battery management systems. Telecommunications equipment, including routers and switches, can utilize this IC for efficient power supply. Additionally, it can be integrated into renewable energy systems like solar inverters and wind turbine controllers.

Detailed and Complete Alternative Models

  • IR21063S: Similar to IR21064S but with a lower maximum output current of 1A.
  • IR21065S: Similar to IR21064S but with a higher maximum output current of 3A.
  • IR21066S: Similar to IR21064S but with additional features such as adjustable switching frequency and synchronization capability.

These alternative models provide options with varying specifications and capabilities, allowing users to choose the most suitable IC for their specific application requirements.

Word count: 610 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av IR21064S i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of IR21064S in technical solutions:

  1. Q: What is the IR21064S? A: The IR21064S is a high-performance microprocessor designed for embedded control applications.

  2. Q: What are the key features of the IR21064S? A: The IR21064S features a dual-core architecture, high-speed floating-point processing, integrated peripherals, and low power consumption.

  3. Q: What are some typical applications of the IR21064S? A: The IR21064S is commonly used in industrial automation, robotics, motor control, power electronics, and other real-time control systems.

  4. Q: How does the dual-core architecture of the IR21064S benefit technical solutions? A: The dual-core architecture allows for parallel processing, enabling faster execution of complex algorithms and improved system performance.

  5. Q: Can the IR21064S handle real-time control tasks? A: Yes, the IR21064S is specifically designed for real-time control applications, providing precise timing and fast response capabilities.

  6. Q: Does the IR21064S support floating-point calculations? A: Yes, the IR21064S has built-in hardware support for floating-point arithmetic, making it suitable for applications that require high-precision calculations.

  7. Q: What kind of peripherals are integrated into the IR21064S? A: The IR21064S includes various peripherals such as timers, UARTs, SPI, I2C, PWM, and ADCs, which simplify system design and reduce external component count.

  8. Q: Is the IR21064S suitable for low-power applications? A: Yes, the IR21064S is designed with power efficiency in mind, featuring multiple power-saving modes and optimized clock gating techniques.

  9. Q: Can the IR21064S be programmed using a high-level language? A: Yes, the IR21064S supports programming in C/C++, allowing developers to write code in a familiar and efficient manner.

  10. Q: Are development tools available for the IR21064S? A: Yes, there are various development tools, such as compilers, debuggers, and integrated development environments (IDEs), specifically designed for the IR21064S architecture.

Please note that these questions and answers are general and may vary depending on specific technical requirements and applications.