Infineon Technologies
Bild kan vara representation.
Se specifikationer för produktinformation.
BTS3028SDRATMA1
Visa detalj Datablad

BTS3028SDRATMA1

Overview

Category: Power Electronics
Use: Motor Control
Characteristics: High voltage, high current, low on-resistance
Package: Surface Mount Device (SMD)
Essence: Smart High-Side Power Switch
Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Voltage Rating: 12V to 24V
  • Current Rating: Up to 30A
  • On-Resistance: 5mΩ
  • Operating Temperature Range: -40°C to +150°C
  • Protection Features: Overcurrent protection, Overtemperature protection, Undervoltage lockout

Detailed Pin Configuration

The BTS3028SDRATMA1 has a total of 7 pins. The pin configuration is as follows:

  1. IN: Input control signal
  2. GND: Ground reference
  3. Vbb: Positive supply voltage
  4. OUT: Output to the load
  5. DIAG: Diagnostic output
  6. EN: Enable input
  7. VS: Sense voltage input

Functional Features

  • Smart Diagnosis: The BTS3028SDRATMA1 provides diagnostic feedback through the DIAG pin, allowing for easy fault detection and troubleshooting.
  • Overcurrent Protection: The device automatically shuts off the output in case of excessive current flow, preventing damage to the load and the power switch itself.
  • Overtemperature Protection: If the operating temperature exceeds the specified limit, the BTS3028SDRATMA1 activates thermal shutdown to prevent overheating.
  • Undervoltage Lockout: The power switch remains disabled if the supply voltage falls below a certain threshold, ensuring safe operation.

Advantages and Disadvantages

Advantages: - High voltage and current handling capability - Low on-resistance minimizes power losses - Integrated diagnostic features simplify troubleshooting - Robust protection mechanisms enhance reliability

Disadvantages: - Relatively high cost compared to traditional power switches - Requires careful thermal management due to high power dissipation

Working Principles

The BTS3028SDRATMA1 is a smart high-side power switch designed for motor control applications. It operates by controlling the flow of current from the positive supply voltage (Vbb) to the load (OUT) based on the input control signal (IN). The device incorporates advanced protection features such as overcurrent and overtemperature protection, ensuring safe and reliable operation.

Detailed Application Field Plans

The BTS3028SDRATMA1 finds extensive use in various motor control applications, including:

  1. Automotive Systems: Electric power steering, HVAC blowers, seat adjustment systems.
  2. Industrial Automation: Motor-driven actuators, robotic systems, conveyor belts.
  3. Home Appliances: Washing machines, vacuum cleaners, air conditioners.

Detailed and Complete Alternative Models

  1. BTS3012SDRATMA1: Similar specifications, lower current rating (up to 12A).
  2. BTS3036SDRATMA1: Similar specifications, higher current rating (up to 36A).
  3. BTS3080SDRATMA1: Similar specifications, higher voltage rating (up to 80V).

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 345 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av BTS3028SDRATMA1 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of BTS3028SDRATMA1 in technical solutions:

Q1: What is BTS3028SDRATMA1? A1: BTS3028SDRATMA1 is a specific model of power switch IC designed for use in automotive applications.

Q2: What are the key features of BTS3028SDRATMA1? A2: Some key features include overcurrent protection, short-circuit protection, thermal shutdown, and low on-resistance.

Q3: What is the maximum current rating of BTS3028SDRATMA1? A3: The maximum current rating of BTS3028SDRATMA1 is typically around 30A.

Q4: Can BTS3028SDRATMA1 be used in high-temperature environments? A4: Yes, BTS3028SDRATMA1 is designed to operate in high-temperature environments, typically up to 150°C.

Q5: What type of load can BTS3028SDRATMA1 handle? A5: BTS3028SDRATMA1 can handle various types of loads, including resistive, inductive, and capacitive loads.

Q6: Is BTS3028SDRATMA1 suitable for automotive lighting applications? A6: Yes, BTS3028SDRATMA1 is commonly used in automotive lighting applications due to its high current handling capability.

Q7: Does BTS3028SDRATMA1 have built-in protection features? A7: Yes, BTS3028SDRATMA1 has built-in protection features such as overcurrent and short-circuit protection.

Q8: Can BTS3028SDRATMA1 be controlled using a microcontroller? A8: Yes, BTS3028SDRATMA1 can be controlled using a microcontroller through its input pins.

Q9: What is the typical voltage rating of BTS3028SDRATMA1? A9: The typical voltage rating of BTS3028SDRATMA1 is around 12V to 24V, suitable for automotive applications.

Q10: Are there any application notes or reference designs available for BTS3028SDRATMA1? A10: Yes, the manufacturer provides application notes and reference designs that can help in implementing BTS3028SDRATMA1 in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of BTS3028SDRATMA1.