Diodes Incorporated
Bild kan vara representation.
Se specifikationer för produktinformation.
PI74STX1G126CEX
Visa detalj Datablad

PI74STX1G126CEX

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate Buffer/Driver
  • Characteristics: Single Gate, Non-Inverting, Open Drain Output
  • Package: SOT-353 (SC-88A)
  • Essence: High-Speed CMOS Technology
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 400MHz
  • Propagation Delay Time: 2.3ns (typical)
  • Output Current: ±32mA (maximum)

Detailed Pin Configuration

The PI74STX1G126CEX has a total of 5 pins: 1. GND (Ground): Connected to the ground reference of the circuit. 2. A (Input): Accepts the input signal to be buffered or driven. 3. OE (Output Enable): Controls the output state of the device. 4. Y (Output): Provides the buffered or driven output signal. 5. VCC (Supply Voltage): Connected to the positive supply voltage.

Functional Features

  • Buffer/Driver: The PI74STX1G126CEX acts as a buffer or driver for digital signals.
  • Non-Inverting: The output signal is an exact replica of the input signal.
  • Open Drain Output: The output can be connected to other devices using external pull-up resistors.
  • High-Speed CMOS Technology: Enables fast switching and high-frequency operation.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems. - High-speed operation enables efficient signal processing. - Small package size saves board space. - Open drain output provides flexibility in interfacing with other devices.

Disadvantages: - Limited output current may restrict driving capability for certain applications. - Non-inverting nature may not be suitable for all circuit configurations.

Working Principles

The PI74STX1G126CEX utilizes high-speed CMOS technology to buffer or drive digital signals. When the OE pin is enabled, the input signal at pin A is replicated at the output pin Y. The open drain output allows connection to external devices using pull-up resistors. The device operates within a wide supply voltage range and offers fast propagation delay times.

Detailed Application Field Plans

The PI74STX1G126CEX can be used in various applications, including but not limited to: - Communication systems - Data transmission - Industrial automation - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the PI74STX1G126CEX are: - SN74LVC1G126DBVR (Texas Instruments) - MC74VHC1G126DF2G (ON Semiconductor) - 74LVC1G126GW (NXP Semiconductors) - TC7SZ126AFK(TE85L,F) (Toshiba)

Note: These alternative models may have slight variations in specifications and package options. It is recommended to refer to their respective datasheets for detailed information.

Word count: 346 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av PI74STX1G126CEX i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of PI74STX1G126CEX in technical solutions:

Q1: What is PI74STX1G126CEX? A1: PI74STX1G126CEX is a specific type of integrated circuit (IC) that functions as a single bus buffer gate with three-state outputs.

Q2: What are the key features of PI74STX1G126CEX? A2: Some key features of PI74STX1G126CEX include low power consumption, wide operating voltage range, high-speed operation, and compatibility with various logic families.

Q3: What is the typical application of PI74STX1G126CEX? A3: PI74STX1G126CEX is commonly used in digital systems for level shifting, signal buffering, and driving capacitive loads.

Q4: What is the maximum operating frequency of PI74STX1G126CEX? A4: The maximum operating frequency of PI74STX1G126CEX is typically in the range of several hundred megahertz (MHz).

Q5: Can PI74STX1G126CEX be used in both 3.3V and 5V systems? A5: Yes, PI74STX1G126CEX is designed to operate in a wide voltage range, making it suitable for both 3.3V and 5V systems.

Q6: How many output pins does PI74STX1G126CEX have? A6: PI74STX1G126CEX has one output pin, which can be put into a high-impedance state when not actively driving the signal.

Q7: Is PI74STX1G126CEX compatible with other logic families? A7: Yes, PI74STX1G126CEX is compatible with various logic families such as TTL, CMOS, and LVCMOS.

Q8: Can PI74STX1G126CEX drive capacitive loads directly? A8: Yes, PI74STX1G126CEX has the capability to drive capacitive loads directly without requiring additional external components.

Q9: What is the power supply voltage range for PI74STX1G126CEX? A9: The power supply voltage range for PI74STX1G126CEX typically spans from 2.3V to 5.5V.

Q10: Is PI74STX1G126CEX available in different package options? A10: Yes, PI74STX1G126CEX is available in various package options, including surface mount packages like SOT-23 and SC-70.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for PI74STX1G126CEX.