Diodes Incorporated
Bild kan vara representation.
Se specifikationer för produktinformation.
PI3B3245SE
Visa detalj Datablad

PI3B3245SE

Product Overview

Category

The PI3B3245SE belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for signal switching applications in electronic devices.

Characteristics

  • High-speed performance
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

The PI3B3245SE is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to efficiently switch signals within electronic circuits.

Packaging/Quantity

The PI3B3245SE is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 2.0V - 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Type: Bidirectional
  • Number of Channels: 8
  • On-State Resistance: 6Ω (typical)
  • Maximum Data Rate: 400Mbps

Detailed Pin Configuration

The PI3B3245SE has a total of 20 pins, which are assigned as follows:

  1. OE (Output Enable) 1
  2. A1 (Address Input) 1
  3. I/O1 (Bidirectional Data I/O) 1
  4. I/O2 (Bidirectional Data I/O) 2
  5. GND (Ground)
  6. I/O3 (Bidirectional Data I/O) 3
  7. I/O4 (Bidirectional Data I/O) 4
  8. VCC (Supply Voltage)
  9. I/O5 (Bidirectional Data I/O) 5
  10. I/O6 (Bidirectional Data I/O) 6
  11. GND (Ground)
  12. I/O7 (Bidirectional Data I/O) 7
  13. I/O8 (Bidirectional Data I/O) 8
  14. A2 (Address Input) 2
  15. OE (Output Enable) 2
  16. GND (Ground)
  17. I/O9 (Bidirectional Data I/O) 9
  18. I/O10 (Bidirectional Data I/O) 10
  19. VCC (Supply Voltage)
  20. I/O11 (Bidirectional Data I/O) 11

Functional Features

  • Bidirectional signal switching
  • High-speed data transmission
  • Low power consumption
  • ESD protection
  • Wide operating voltage range

Advantages and Disadvantages

Advantages

  • Compact size allows for space-saving designs
  • High-speed performance enables efficient signal switching
  • Low power consumption contributes to energy efficiency
  • ESD protection ensures reliability in harsh environments

Disadvantages

  • Limited number of channels may not be suitable for applications requiring a higher channel count
  • On-state resistance may introduce signal attenuation in certain scenarios

Working Principles

The PI3B3245SE operates based on the principles of CMOS technology. It utilizes a combination of transistors and logic gates to enable bidirectional signal switching. When the appropriate control signals are applied, the IC selectively connects or disconnects the input/output lines, allowing the transmission of digital signals.

Detailed Application Field Plans

The PI3B3245SE finds application in various electronic devices and systems, including but not limited to: - Computer peripherals - Networking equipment - Communication systems - Consumer electronics - Industrial automation

Detailed and Complete Alternative Models

  1. PI3B3244SE: Similar to PI3B3245SE, but with 4 channels instead of 8.
  2. PI3B3246SE: Similar to PI3B3245SE, but with 16 channels instead of 8.
  3. PI3B3247SE: Similar to PI3B3245SE, but with integrated ESD protection.

These alternative models provide options with varying channel counts and additional features to suit different application requirements.

Word count: 436 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av PI3B3245SE i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of PI3B3245SE in technical solutions:

  1. Q: What is PI3B3245SE? A: PI3B3245SE is a specific integrated circuit (IC) that functions as a bidirectional level shifter/buffer, commonly used for voltage translation in various technical applications.

  2. Q: What is the voltage range supported by PI3B3245SE? A: PI3B3245SE supports voltage translation between two voltage domains, typically ranging from 1.2V to 3.3V.

  3. Q: How many channels does PI3B3245SE have? A: PI3B3245SE has 8 bidirectional channels, allowing for simultaneous voltage translation of multiple signals.

  4. Q: Can PI3B3245SE handle high-speed data signals? A: Yes, PI3B3245SE is designed to support high-speed data signals, making it suitable for applications requiring fast signal transmission.

  5. Q: What is the maximum data rate supported by PI3B3245SE? A: PI3B3245SE can handle data rates up to 400 Mbps, making it suitable for various communication protocols like I2C, SPI, UART, etc.

  6. Q: Is PI3B3245SE compatible with both push-pull and open-drain outputs? A: Yes, PI3B3245SE is compatible with both push-pull and open-drain outputs, providing flexibility in connecting different types of devices.

  7. Q: Can PI3B3245SE be used in mixed-voltage systems? A: Absolutely, PI3B3245SE is specifically designed for mixed-voltage systems, enabling seamless communication between different voltage domains.

  8. Q: Does PI3B3245SE require external power supply or voltage reference? A: Yes, PI3B3245SE requires an external power supply to operate, typically within the specified voltage range of 1.2V to 3.3V.

  9. Q: What is the package type of PI3B3245SE? A: PI3B3245SE is available in various package types, such as TSSOP, QFN, and SOIC, allowing for easy integration into different PCB designs.

  10. Q: Are there any application notes or reference designs available for PI3B3245SE? A: Yes, the manufacturer of PI3B3245SE provides application notes and reference designs that can help users understand its usage and implementation in specific technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of PI3B3245SE.