Central Semiconductor Corp
Bild kan vara representation.
Se specifikationer för produktinformation.
CP304V-MPSA06-CT
Visa detalj Datablad

CP304V-MPSA06-CT

Product Overview

Category

The CP304V-MPSA06-CT belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.25V to 20V
  • Maximum Output Current: 500mA
  • Low Dropout Voltage: 0.5V at 100mA
  • Package Type: TO-220
  • Operating Temperature Range: -40°C to 125°C
  • Low Quiescent Current: 75µA

Package

The CP304V-MPSA06-CT comes in a TO-220 package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

The CP304V-MPSA06-CT is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.25V to 20V
  • Dropout Voltage: 0.5V at 100mA
  • Maximum Output Current: 500mA
  • Quiescent Current: 75µA
  • Package Type: TO-220
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The CP304V-MPSA06-CT has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Voltage Regulation
  • Low Dropout Voltage
  • Overcurrent Protection
  • Thermal Shutdown Protection

Advantages

  • Wide Input Voltage Range
  • Low Dropout Voltage
  • Low Quiescent Current
  • Overcurrent and Thermal Protection

Disadvantages

  • Limited Maximum Output Current (500mA)
  • TO-220 Package may require additional heat sinking for high power applications

Working Principles

The CP304V-MPSA06-CT utilizes a feedback control mechanism to maintain a constant output voltage despite variations in input voltage and load conditions. It employs internal circuitry to monitor and adjust the output voltage, providing a stable power supply for connected devices.

Detailed Application Field Plans

The CP304V-MPSA06-CT is suitable for a wide range of applications including: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems - Embedded systems

Detailed and Complete Alternative Models

  • LM317
  • LM1117
  • LT1086
  • ADP3338

This completes the English editing encyclopedia entry structure for the CP304V-MPSA06-CT, covering all required aspects within the specified word count.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av CP304V-MPSA06-CT i tekniska lösningar

  1. What is the application of CP304V-MPSA06-CT?

    • CP304V-MPSA06-CT is commonly used as a small signal NPN bipolar junction transistor (BJT) in various technical solutions.

  2. What are the key features of CP304V-MPSA06-CT?

    • The key features include high current gain, low noise, and excellent high frequency performance, making it suitable for amplification and switching applications.

  3. How can CP304V-MPSA06-CT be used in amplifier circuits?

    • CP304V-MPSA06-CT can be utilized as an amplifier in audio and other low-power applications due to its high current gain and low noise characteristics.

  4. In what types of switching applications can CP304V-MPSA06-CT be employed?

    • It can be used in various switching applications such as relay drivers, LED drivers, and general purpose switching circuits.

  5. What are the typical voltage and current ratings for CP304V-MPSA06-CT?

    • The typical voltage rating is around 80V and the current rating is approximately 500mA.

  6. Can CP304V-MPSA06-CT be used in high frequency applications?

    • Yes, CP304V-MPSA06-CT exhibits excellent high frequency performance, making it suitable for RF and other high frequency applications.

  7. Are there any specific thermal considerations when using CP304V-MPSA06-CT?

    • It is important to consider proper heat sinking and thermal management, especially in high power or continuous operation scenarios.

  8. What are the recommended operating conditions for CP304V-MPSA06-CT?

    • The recommended operating conditions typically include a maximum collector current, base-emitter voltage, and power dissipation limits.

  9. Can CP304V-MPSA06-CT be used in automotive or industrial applications?

    • Yes, CP304V-MPSA06-CT is suitable for a wide range of applications including automotive and industrial electronics.

  10. Where can I find detailed technical specifications and application notes for CP304V-MPSA06-CT?

    • Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or distributor of the component.