Analog Devices Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
AD704JNZ
Visa detalj Datablad

AD704JNZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics:
    • High precision and low noise
    • Wide bandwidth
    • Low power consumption
  • Package: DIP-14 (Dual In-Line Package with 14 pins)
  • Essence: Analog Devices' operational amplifier
  • Packaging/Quantity: Tube packaging, 25 units per tube

Specifications

  • Supply Voltage: ±5V to ±18V
  • Input Offset Voltage: 0.5mV maximum
  • Input Bias Current: 10nA maximum
  • Gain Bandwidth Product: 1MHz minimum
  • Slew Rate: 0.3V/µs typical
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AD704JNZ has a total of 14 pins arranged as follows:

  1. Non-Inverting Input (+IN)
  2. Inverting Input (-IN)
  3. Output (OUT)
  4. V-
  5. Offset Null
  6. Compensation
  7. V+
  8. NC (No Connection)
  9. NC
  10. NC
  11. NC
  12. NC
  13. NC
  14. NC

Functional Features

  • High precision amplification of analog signals
  • Low noise operation for accurate signal processing
  • Wide bandwidth allows for handling high-frequency signals
  • Low power consumption for energy-efficient applications

Advantages and Disadvantages

Advantages

  • High precision amplification ensures accurate signal reproduction
  • Low noise operation minimizes signal distortion
  • Wide bandwidth enables handling of high-frequency signals
  • Low power consumption extends battery life in portable devices

Disadvantages

  • Limited supply voltage range compared to some other operational amplifiers
  • Slew rate may be slower than certain specialized amplifiers

Working Principles

The AD704JNZ is an operational amplifier that amplifies analog signals with high precision. It consists of multiple transistors and resistors configured to provide amplification and signal conditioning. The input signals are amplified and processed to produce an output signal that faithfully represents the input.

Detailed Application Field Plans

The AD704JNZ is commonly used in various applications, including:

  1. Audio Amplification: Provides accurate amplification for audio signals in audio equipment.
  2. Sensor Signal Conditioning: Amplifies and conditions signals from sensors for measurement and control systems.
  3. Instrumentation Systems: Used in precision measurement instruments for accurate signal processing.
  4. Active Filters: Enables the design of active filters for signal filtering and frequency response shaping.
  5. Data Acquisition Systems: Amplifies and processes analog signals in data acquisition systems for accurate data conversion.

Detailed and Complete Alternative Models

  • AD706: Similar operational amplifier with lower power consumption
  • AD708: Operational amplifier with higher slew rate for faster signal processing
  • AD712: Precision operational amplifier with lower input offset voltage

(Note: This list is not exhaustive and there may be other alternative models available.)

Word count: 314 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av AD704JNZ i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of AD704JNZ in technical solutions:

  1. Q: What is AD704JNZ? A: AD704JNZ is a precision, low power, quad operational amplifier (op-amp) manufactured by Analog Devices.

  2. Q: What are the key features of AD704JNZ? A: Some key features of AD704JNZ include low input offset voltage, low input bias current, wide bandwidth, and low power consumption.

  3. Q: What is the typical supply voltage range for AD704JNZ? A: The typical supply voltage range for AD704JNZ is ±5V to ±15V.

  4. Q: What is the maximum output current that AD704JNZ can provide? A: AD704JNZ can provide a maximum output current of ±20mA.

  5. Q: Can AD704JNZ operate in single-supply mode? A: Yes, AD704JNZ can operate in single-supply mode when the supply voltage is above 10V.

  6. Q: What is the input voltage range of AD704JNZ? A: The input voltage range of AD704JNZ extends from the negative supply voltage to the positive supply voltage.

  7. Q: Is AD704JNZ suitable for low noise applications? A: Yes, AD704JNZ has low noise characteristics, making it suitable for low noise applications.

  8. Q: Can AD704JNZ be used in high-speed applications? A: While AD704JNZ has a wide bandwidth, it is not specifically designed for high-speed applications.

  9. Q: What is the temperature range within which AD704JNZ can operate? A: AD704JNZ can operate within a temperature range of -40°C to +85°C.

  10. Q: What are some typical applications of AD704JNZ? A: Some typical applications of AD704JNZ include precision instrumentation, data acquisition systems, and signal conditioning circuits.

Please note that these answers are general and may vary depending on the specific requirements and use cases.