Analog Devices Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
AD2S1000YSTZ

AD2S1000YSTZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Position Sensor
  • Characteristics: High accuracy, low power consumption
  • Package: Small Outline Transistor (SOT) package
  • Essence: Converts angular position to digital output
  • Packaging/Quantity: Tape and reel packaging, 250 units per reel

Specifications

  • Resolution: 12-bit
  • Input Voltage Range: ±10V
  • Conversion Time: 10µs
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage: +5V ±10%
  • Power Consumption: 25mW

Detailed Pin Configuration

The AD2S1000YSTZ has a total of 28 pins. The pin configuration is as follows:

  1. VDD: Positive supply voltage
  2. AGND: Analog ground
  3. REFOUT: Reference voltage output
  4. REFIN: Reference voltage input
  5. D7: Digital output bit 7
  6. D6: Digital output bit 6
  7. D5: Digital output bit 5
  8. D4: Digital output bit 4
  9. D3: Digital output bit 3
  10. D2: Digital output bit 2
  11. D1: Digital output bit 1
  12. D0: Digital output bit 0
  13. CLK: Clock input
  14. CS: Chip select input
  15. DGND: Digital ground
  16. SIN: Sine/cosine input
  17. COS: Sine/cosine input
  18. RFS: Reference frequency select
  19. FSYNC: Frame sync input
  20. AGND: Analog ground
  21. VDD: Positive supply voltage
  22. VREF: Reference voltage
  23. VCM: Common mode voltage
  24. VOUT: Analog output
  25. AGND: Analog ground
  26. AGND: Analog ground
  27. AGND: Analog ground
  28. AGND: Analog ground

Functional Features

  • High accuracy position sensing
  • Direct digital conversion of angular position
  • On-chip digital-to-analog converter (DAC)
  • Programmable reference frequency
  • Serial interface for easy integration with microcontrollers

Advantages and Disadvantages

Advantages: - High resolution and accuracy - Low power consumption - Small package size for space-constrained applications - Easy integration with microcontrollers

Disadvantages: - Limited input voltage range - Relatively high cost compared to alternative models

Working Principles

The AD2S1000YSTZ is based on the principle of a resolver-to-digital converter. It converts the analog signals from a resolver, which is a type of rotary transformer, into digital outputs representing the angular position. The device uses an internal DAC to generate a reference voltage that is compared with the resolver's output. The resulting digital code represents the position information.

Detailed Application Field Plans

The AD2S1000YSTZ is widely used in various applications that require accurate position sensing. Some of the common application fields include:

  1. Robotics: Precise control of robotic arm movements
  2. Industrial Automation: Position feedback in conveyor systems
  3. Automotive: Steering angle measurement in vehicles
  4. Aerospace: Aircraft flight control systems
  5. Medical Equipment: Surgical robot positioning

Detailed and Complete Alternative Models

  1. AD2S1200YSTZ: Higher resolution (14-bit) version of AD2S1000YSTZ
  2. AD2S1600YSTZ: Higher resolution (16-bit) version of AD2S1000YSTZ
  3. AD2S2000YSTZ: Higher resolution (20-bit) version of AD2S1000YSTZ
  4. AD2S2200YSTZ: Higher resolution (22-bit) version of AD2S1000YSTZ

These alternative models offer increased resolution for applications that require finer position sensing.

Word count: 411 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av AD2S1000YSTZ i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of AD2S1000YSTZ in technical solutions:

  1. Question: What is the AD2S1000YSTZ?
    Answer: The AD2S1000YSTZ is a high-resolution, programmable resolver-to-digital converter.

  2. Question: What is a resolver?
    Answer: A resolver is an electromechanical device used to measure angular position and velocity.

  3. Question: What are the key features of the AD2S1000YSTZ?
    Answer: The key features include 12-bit resolution, programmable tracking rate, and serial interface compatibility.

  4. Question: How does the AD2S1000YSTZ convert resolver signals to digital output?
    Answer: It uses a combination of analog-to-digital conversion and digital signal processing techniques.

  5. Question: What is the typical application of the AD2S1000YSTZ?
    Answer: It is commonly used in motion control systems, robotics, and industrial automation for accurate position sensing.

  6. Question: Can the AD2S1000YSTZ handle multiple resolvers simultaneously?
    Answer: No, it is designed to interface with a single resolver at a time.

  7. Question: What is the operating voltage range of the AD2S1000YSTZ?
    Answer: It operates from a single +5V power supply.

  8. Question: Does the AD2S1000YSTZ provide any diagnostic features?
    Answer: Yes, it includes built-in self-test (BIST) capabilities for system-level fault detection.

  9. Question: Is the AD2S1000YSTZ compatible with different resolver types?
    Answer: Yes, it supports both brushless and brush-type resolvers.

  10. Question: Can the AD2S1000YSTZ be programmed for different resolution settings?
    Answer: Yes, it offers programmable resolution options ranging from 10 to 12 bits.

Please note that these answers are general and may vary depending on the specific application and requirements.