ams
Bild kan vara representation.
Se specifikationer för produktinformation.
TSL261R-LF
Visa detalj Datablad

TSL261R-LF

Product Overview

The TSL261R-LF belongs to the category of light-to-voltage optical sensors. It is commonly used for ambient light sensing and proximity detection in various electronic devices. The sensor possesses characteristics such as high sensitivity, low dark current, and a wide dynamic range. It is typically packaged in a small surface-mount package and is available in various quantities.

Specifications

  • Operating Voltage: 2.7V to 3.6V
  • Output Voltage: 0.4V to 2.6V
  • Sensitivity: 3.125mV per lux
  • Package Type: Surface Mount
  • Package Quantity: 100 pieces per reel

Detailed Pin Configuration

The TSL261R-LF features a standard 4-pin configuration: 1. VCC (Power Supply) 2. GND (Ground) 3. OUT (Analog Output) 4. NC (No Connection)

Functional Features

The sensor operates by converting light intensity into a proportional voltage output. It utilizes a photodiode array to detect light and then converts the detected light into an electrical signal. This analog output can be interfaced with microcontrollers or other digital systems for further processing.

Advantages and Disadvantages

Advantages

  • High sensitivity allows for accurate light detection
  • Low dark current ensures minimal noise in low-light conditions
  • Wide dynamic range enables operation in various lighting environments

Disadvantages

  • Susceptible to interference from ambient infrared light sources
  • Limited to detecting visible light wavelengths

Working Principles

The TSL261R-LF operates based on the principle of photoconductivity. When exposed to light, the photodiode array generates electron-hole pairs, resulting in a change in conductivity and producing a corresponding voltage output.

Detailed Application Field Plans

The TSL261R-LF finds applications in various fields, including: - Mobile devices for automatic display brightness adjustment - Proximity detection in consumer electronics - Industrial automation for light-sensitive control systems - Ambient light sensing in automotive applications

Detailed and Complete Alternative Models

Some alternative models to the TSL261R-LF include: - TSL257-LF: Offers higher sensitivity and wider dynamic range - TSL2591-LF: Provides multi-channel light sensing capabilities - TSL45315-LF: Integrates infrared light filtering for improved accuracy

In conclusion, the TSL261R-LF serves as a reliable light-to-voltage sensor with its high sensitivity and wide dynamic range, making it suitable for diverse ambient light sensing and proximity detection applications across various industries.

Word Count: 311

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TSL261R-LF i tekniska lösningar

  1. What is the TSL261R-LF sensor used for?

    • The TSL261R-LF sensor is commonly used for ambient light sensing in various technical solutions.

  2. What is the operating voltage range of the TSL261R-LF sensor?

    • The operating voltage range of the TSL261R-LF sensor is typically between 2.7V and 3.6V.

  3. How does the TSL261R-LF sensor communicate with microcontrollers or other devices?

    • The TSL261R-LF sensor typically communicates using an I2C interface, making it compatible with a wide range of microcontrollers and devices.

  4. What is the spectral response of the TSL261R-LF sensor?

    • The TSL261R-LF sensor has a spectral response range of approximately 400nm to 700nm, covering the visible light spectrum.

  5. Can the TSL261R-LF sensor be used in outdoor applications?

    • Yes, the TSL261R-LF sensor can be used in outdoor applications, but it may require additional protection from environmental factors such as moisture and direct sunlight.

  6. What is the typical resolution of the TSL261R-LF sensor?

    • The TSL261R-LF sensor typically has a resolution of 16 bits, providing high precision in light sensing applications.

  7. Is the TSL261R-LF sensor suitable for battery-powered devices?

    • Yes, the TSL261R-LF sensor's low power consumption makes it suitable for use in battery-powered devices.

  8. Can the TSL261R-LF sensor be used for proximity sensing?

    • No, the TSL261R-LF sensor is specifically designed for ambient light sensing and is not suitable for proximity sensing applications.

  9. What are the typical output formats of the TSL261R-LF sensor?

    • The TSL261R-LF sensor typically provides digital output in lux or raw ADC counts, making it easy to integrate into different technical solutions.

  10. Are there any specific considerations for integrating the TSL261R-LF sensor into a design?

    • When integrating the TSL261R-LF sensor, it's important to consider factors such as placement for optimal light detection, as well as any necessary calibration for accurate readings.