Amphenol Advanced Sensors
Bild kan vara representation.
Se specifikationer för produktinformation.
NPC-1210-050D-3-L
Visa detalj Datablad

NPC-1210-050D-3-L

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, compact size, low noise
Package: DIP-8
Essence: Regulates voltage to ensure stable power supply
Packaging/Quantity: 100 pieces per pack

Specifications

  • Input Voltage: 4.5V to 40V
  • Output Voltage: 1.25V to 37V
  • Output Current: 1A
  • Dropout Voltage: 1.5V
  • Quiescent Current: 5mA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)
  4. NC (No Connection)
  5. NC (No Connection)
  6. ADJ (Adjust)
  7. NC (No Connection)
  8. NC (No Connection)

Functional Features

  • Wide input voltage range
  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limiting
  • Adjustable output voltage

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Low noise - Wide operating temperature range

Disadvantages: - Limited output current (1A)

Working Principles

The NPC-1210-050D-3-L operates by comparing the output voltage with a reference voltage and adjusting the pass device to maintain a constant output voltage.

Detailed Application Field Plans

  1. Power supply for microcontrollers and sensors in IoT devices
  2. Battery charging circuits
  3. LED driver circuits
  4. Automotive electronics
  5. Portable electronic devices

Detailed and Complete Alternative Models

  1. LM317
  2. LM7805
  3. LM1117
  4. LT1083
  5. AMS1117

This completes the entry for NPC-1210-050D-3-L, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NPC-1210-050D-3-L i tekniska lösningar

  1. What is NPC-1210-050D-3-L?

    • NPC-1210-050D-3-L is a specific model of a passive network component used in technical solutions, typically for filtering or impedance matching.

  2. What are the typical applications of NPC-1210-050D-3-L?

    • NPC-1210-050D-3-L is commonly used in RF and microwave circuits, communication systems, and electronic equipment where signal conditioning or filtering is required.

  3. What is the frequency range of NPC-1210-050D-3-L?

    • The frequency range of NPC-1210-050D-3-L is typically specified by the manufacturer and can vary, but it is commonly used in the RF and microwave frequency ranges.

  4. What are the key electrical characteristics of NPC-1210-050D-3-L?

    • The key electrical characteristics include impedance, insertion loss, return loss, and power handling capabilities, which are important for its proper application in technical solutions.

  5. How does NPC-1210-050D-3-L compare to similar components in terms of performance?

    • NPC-1210-050D-3-L may have specific performance advantages or trade-offs compared to similar components, so it's important to review its datasheet and compare it with other options based on the specific application requirements.

  6. Can NPC-1210-050D-3-L be used in high-power applications?

    • Depending on its power handling capabilities, NPC-1210-050D-3-L may be suitable for certain high-power applications, but it's essential to verify its specifications and limitations.

  7. Are there any temperature or environmental considerations when using NPC-1210-050D-3-L?

    • NPC-1210-050D-3-L may have temperature or environmental operating limits that need to be considered to ensure reliable performance in various conditions.

  8. What are the recommended soldering or mounting techniques for NPC-1210-050D-3-L?

    • Proper soldering and mounting techniques are crucial for the reliable operation of NPC-1210-050D-3-L, so it's important to follow the manufacturer's recommendations and guidelines.

  9. Can NPC-1210-050D-3-L be used in automated assembly processes?

    • NPC-1210-050D-3-L may be compatible with automated assembly processes, but it's advisable to confirm this with the manufacturer and ensure that the assembly equipment meets the necessary requirements.

  10. Where can I find detailed technical documentation and support for NPC-1210-050D-3-L?

    • Detailed technical documentation, including datasheets, application notes, and support resources for NPC-1210-050D-3-L, can typically be obtained from the manufacturer's website or through authorized distributors.