ACS758ECB-200U-PFF-T
Product Overview
Category
The ACS758ECB-200U-PFF-T belongs to the category of current sensor integrated circuits.
Use
It is used for measuring electrical current in various applications.
Characteristics
- High accuracy
- Low noise
- Small package size
- Wide dynamic range
Package
The ACS758ECB-200U-PFF-T is available in a surface-mount package.
Essence
This product is essential for precise current measurement in electronic systems.
Packaging/Quantity
The ACS758ECB-200U-PFF-T is typically packaged in reels and is available in varying quantities based on customer requirements.
Specifications
- Operating Voltage: 3V to 5.5V
- Output Voltage: 0.6V to VCC - 0.4V
- Sensitivity: 20mV/A
- Bandwidth: DC to 120kHz
- Operating Temperature Range: -40°C to 150°C
Detailed Pin Configuration
The ACS758ECB-200U-PFF-T has a 5-pin configuration: 1. VCC 2. GND 3. VIOUT 4. NC (No Connection) 5. VOUT
Functional Features
- High sensitivity
- Low offset voltage
- Overcurrent detection
- Integrated overcurrent fault output
Advantages
- Accurate current measurement
- Wide operating temperature range
- Compact design
- Integrated fault detection
Disadvantages
- Limited bandwidth for high-frequency applications
- Requires careful PCB layout for optimal performance
Working Principles
The ACS758ECB-200U-PFF-T utilizes the Hall effect to measure current. When current flows through the device, it generates a magnetic field that is sensed by the integrated Hall sensor, producing an output voltage proportional to the input current.
Detailed Application Field Plans
The ACS758ECB-200U-PFF-T is suitable for a wide range of applications including: - Motor control systems - Power supplies - Battery management systems - Industrial automation - Inverters and converters
Detailed and Complete Alternative Models
- ACS758KCB-150B-PSS-T
- ACS759KCB-150B-PSS-T
- ACS770ECB-200B-PFF-T
- ACS771KCB-150B-PSS-T
In conclusion, the ACS758ECB-200U-PFF-T is a highly accurate and reliable current sensor IC with a wide range of applications in various electronic systems.
[Word count: 330]
Lista 10 Vanliga frågor och svar relaterade till tillämpningen av ACS758ECB-200U-PFF-T i tekniska lösningar
What is the ACS758ECB-200U-PFF-T?
- The ACS758ECB-200U-PFF-T is a fully integrated Hall effect-based linear current sensor designed for applications that require high precision and low noise.
What is the operating voltage range of the ACS758ECB-200U-PFF-T?
- The operating voltage range of the ACS758ECB-200U-PFF-T is 3V to 5.5V, making it suitable for a wide range of applications.
What is the output signal of the ACS758ECB-200U-PFF-T?
- The ACS758ECB-200U-PFF-T provides an analog output voltage proportional to the AC or DC current passing through the device.
What is the typical accuracy of the ACS758ECB-200U-PFF-T?
- The ACS758ECB-200U-PFF-T has a typical accuracy of ±1.5% at room temperature, providing reliable current measurements.
What is the bandwidth of the ACS758ECB-200U-PFF-T?
- The ACS758ECB-200U-PFF-T has a bandwidth of 120 kHz, allowing for precise current sensing in dynamic applications.
What are the common applications of the ACS758ECB-200U-PFF-T?
- The ACS758ECB-200U-PFF-T is commonly used in motor control, power management systems, and industrial automation for accurate current monitoring.
Does the ACS758ECB-200U-PFF-T require external calibration?
- No, the ACS758ECB-200U-PFF-T is factory-calibrated, eliminating the need for additional calibration during application.
Is the ACS758ECB-200U-PFF-T suitable for high-current applications?
- Yes, the ACS758ECB-200U-PFF-T can measure currents up to 200A, making it suitable for high-current applications.
What is the thermal performance of the ACS758ECB-200U-PFF-T?
- The ACS758ECB-200U-PFF-T has a low thermal drift, ensuring stable performance across a wide temperature range.
Can the ACS758ECB-200U-PFF-T be used in automotive applications?
- Yes, the ACS758ECB-200U-PFF-T is AEC-Q100 qualified, making it suitable for automotive applications where high reliability is essential.