Allegro MicroSystems, LLC
Bild kan vara representation.
Se specifikationer för produktinformation.
ACS714LLCTR-30A-T
Visa detalj Datablad

ACS714LLCTR-30A-T

Introduction

The ACS714LLCTR-30A-T is a current sensor belonging to the category of Hall Effect-based linear current sensors. This device is widely used for measuring AC and DC currents in various applications due to its high accuracy and reliability.

Basic Information Overview

  • Category: Hall Effect-based linear current sensor
  • Use: Measuring AC and DC currents
  • Characteristics: High accuracy, reliable performance
  • Package: Surface Mount Device (SMD)
  • Essence: Accurate current measurement
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

  • Operating Voltage: 5V
  • Sensitivity: 66mV/A
  • Output: Analog voltage proportional to the current being measured
  • Bandwidth: DC to 120 kHz
  • Isolation Voltage: 2.1 kV RMS
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The ACS714LLCTR-30A-T has a 4-pin configuration: 1. VCC: Power supply input 2. GND: Ground connection 3. OUT: Analog output proportional to the measured current 4. NC: No connection

Functional Features

  • High sensitivity and accuracy
  • Wide bandwidth for AC and DC current measurement
  • Low power consumption
  • Isolation voltage for enhanced safety

Advantages and Disadvantages

Advantages

  • Accurate current measurement
  • Wide operating temperature range
  • Compact SMD package
  • Isolation voltage for safety

Disadvantages

  • Limited to low to moderate current measurements
  • Requires external calibration for precise readings

Working Principles

The ACS714LLCTR-30A-T utilizes the Hall Effect principle to measure current. When a current flows through the sensor, it generates a magnetic field which is sensed by the Hall Effect sensor, producing an output voltage proportional to the current.

Detailed Application Field Plans

The ACS714LLCTR-30A-T finds extensive use in various applications including: - Motor control systems - Power supplies - Battery management systems - Inverters and converters - Industrial automation

Detailed and Complete Alternative Models

Some alternative models to the ACS714LLCTR-30A-T include: - ACS712ELCTR-05B-T: Lower current sensing capability - ACS723LLCTR-20A-T: Higher current sensing capability - ACS758LCB-100B-PFF-T: Bidirectional current sensing

In conclusion, the ACS714LLCTR-30A-T is a versatile and reliable current sensor suitable for a wide range of applications requiring accurate current measurement.

[Word count: 399]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av ACS714LLCTR-30A-T i tekniska lösningar

  1. What is the ACS714LLCTR-30A-T?

    • The ACS714LLCTR-30A-T is a current sensor IC that can measure AC or DC current up to 30A.

  2. How does the ACS714LLCTR-30A-T work?

    • It utilizes Hall effect technology to measure the magnetic field generated by the current passing through the conductor, and then converts it into an electrical signal proportional to the current.

  3. What are the typical applications of the ACS714LLCTR-30A-T?

    • It is commonly used in applications such as motor control, power supplies, and overcurrent protection in various electronic devices.

  4. What is the output signal of the ACS714LLCTR-30A-T?

    • The output is an analog voltage signal that is linearly proportional to the sensed current.

  5. How accurate is the ACS714LLCTR-30A-T?

    • It has a typical accuracy of around ±1.5% at room temperature, making it suitable for many precision measurement applications.

  6. What is the operating voltage range of the ACS714LLCTR-30A-T?

    • It typically operates from 4.5V to 5.5V, making it compatible with a wide range of microcontrollers and other electronic components.

  7. Can the ACS714LLCTR-30A-T measure both AC and DC currents?

    • Yes, it is capable of measuring both AC and DC currents, which makes it versatile for different types of applications.

  8. Does the ACS714LLCTR-30A-T require external calibration?

    • No, it is factory-calibrated, and no additional calibration is required in most cases.

  9. What is the response time of the ACS714LLCTR-30A-T?

    • It has a fast response time, typically in the range of microseconds, allowing it to capture rapid changes in current flow.

  10. Are there any special considerations for PCB layout when using the ACS714LLCTR-30A-T?

    • It is recommended to keep the current-carrying conductor close to the sensor to minimize electromagnetic interference and ensure accurate measurements.