AKM Semiconductor Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
AK4440EF
Visa detalj Datablad

AK4440EF

Introduction

The AK4440EF is a digital-to-analog converter (DAC) belonging to the category of audio processing integrated circuits. This high-performance DAC is widely used in audio equipment to convert digital audio signals into analog form for playback through speakers or headphones.

Basic Information Overview

  • Category: Audio Processing Integrated Circuit
  • Use: Digital-to-Analog Conversion in Audio Equipment
  • Characteristics: High Performance, Low Distortion, Low Noise
  • Package: SSOP-24
  • Essence: High-Quality Audio Signal Conversion
  • Packaging/Quantity: Tape & Reel, 2500 per reel

Specifications

  • Resolution: 24-bit
  • Sampling Rate: Up to 192 kHz
  • Dynamic Range: 115 dB
  • Total Harmonic Distortion + Noise (THD+N): -100 dB
  • Operating Voltage: 3.0 V to 5.5 V
  • Power Consumption: 14 mW (at 3.3 V, 48 kHz)

Detailed Pin Configuration

The AK4440EF features a 24-pin SSOP package with pins assigned for power supply, input/output data, control signals, and ground connections. The detailed pin configuration is as follows: 1. VREFL 2. VOUTL 3. VCOML 4. GND 5. VCOMR 6. VOUTR 7. VREFR 8. DVDD 9. SDTI 10. SDTO 11. SCK 12. MCLK 13. BICK 14. LRCK 15. MODE 16. DEEM 17. MUTER 18. MUTEL 19. DZFE 20. DZFD 21. DZRE 22. DZRD 23. VDD 24. NC

Functional Features

The AK4440EF offers the following functional features: - High-resolution digital-to-analog conversion - Support for high sampling rates up to 192 kHz - Low distortion and noise for high-quality audio output - Flexible control interface for seamless integration into audio systems

Advantages and Disadvantages

Advantages

  • High performance with 24-bit resolution
  • Wide operating voltage range for flexibility in system design
  • Low power consumption for energy-efficient applications

Disadvantages

  • Limited to stereo audio output
  • Requires external components for full audio signal processing

Working Principles

The AK4440EF operates by receiving digital audio data and converting it into analog signals using its high-resolution DAC architecture. It utilizes internal circuitry to minimize distortion and noise, ensuring accurate reproduction of the original audio content.

Detailed Application Field Plans

The AK4440EF is well-suited for various audio applications, including: - Consumer audio products such as amplifiers, receivers, and soundbars - Professional audio equipment like studio monitors and mixing consoles - Automotive infotainment systems and head units - Portable audio devices such as digital audio players and USB DACs

Detailed and Complete Alternative Models

  • AK4458VN: Higher resolution (32-bit) DAC with similar performance characteristics
  • PCM5102A: Lower power consumption DAC suitable for portable audio applications
  • CS4398: High-end DAC with advanced digital filtering and dynamic range

In conclusion, the AK4440EF is a versatile and high-performance DAC designed for demanding audio applications, offering exceptional audio quality and flexible integration capabilities.

Word Count: 497

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av AK4440EF i tekniska lösningar

  1. What is the AK4440EF?

    • The AK4440EF is a 24-bit stereo audio digital-to-analog converter (DAC) with a built-in headphone amplifier, designed for high-quality audio applications.

  2. What are the key features of the AK4440EF?

    • The key features of the AK4440EF include low distortion, low noise, wide dynamic range, and a built-in digital filter.

  3. What are the typical applications of the AK4440EF?

    • The AK4440EF is commonly used in audio equipment such as AV receivers, soundbars, portable audio players, and digital audio systems.

  4. What is the input format supported by the AK4440EF?

    • The AK4440EF supports various input formats including I2S, left-justified, right-justified, and TDM (time-division multiplexing).

  5. What is the output voltage range of the AK4440EF?

    • The AK4440EF has an output voltage range of 1.3Vrms, making it suitable for driving headphones and line-level outputs.

  6. Does the AK4440EF require external components for operation?

    • The AK4440EF requires minimal external components, typically including decoupling capacitors and a clock source.

  7. What is the power supply voltage range for the AK4440EF?

    • The AK4440EF operates within a wide power supply voltage range of 2.4V to 5.5V, making it versatile for different system designs.

  8. Can the AK4440EF be used in battery-powered devices?

    • Yes, the low power consumption and wide power supply voltage range make the AK4440EF suitable for battery-powered devices.

  9. Does the AK4440EF support digital volume control?

    • Yes, the AK4440EF features a built-in digital volume control function, allowing for flexible audio level adjustments.

  10. Is the AK4440EF compatible with industry-standard audio interfaces?

    • Yes, the AK4440EF is compatible with industry-standard audio interfaces, making it easy to integrate into existing audio systems.