S-8352C50UA-K7JT2G

Product Overview

Category

S-8352C50UA-K7JT2G belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

• Package: The S-8352C50UA-K7JT2G comes in a compact surface-mount package.
• Essence: It is a high-performance voltage regulator designed for efficient power management.
• Packaging/Quantity: The product is typically packaged in reels and available in large quantities.

Specifications

The specifications of the S-8352C50UA-K7JT2G are as follows:

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage: 5.0V ±2%
• Maximum Output Current: 500mA
• Dropout Voltage: 200mV (at 100mA)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of the S-8352C50UA-K7JT2G is as follows:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin
5. NC: No connection pin

Functional Features

The S-8352C50UA-K7JT2G offers the following functional features:

• Low dropout voltage: Ensures stable output voltage even when the input voltage is close to the desired output voltage.
• Low quiescent current: Minimizes power consumption during standby or idle mode.
• Overcurrent protection: Safeguards the circuit by limiting the output current to a safe level.
• Thermal shutdown protection: Prevents damage due to excessive heat by shutting down the regulator when the temperature exceeds a certain threshold.

Advantages and Disadvantages

Advantages

• High efficiency: The S-8352C50UA-K7JT2G provides efficient power management, reducing energy waste.
• Compact size: Its small package allows for space-saving integration into various electronic devices.
• Wide operating temperature range: Can operate reliably in extreme temperature conditions.

Disadvantages

• Limited output current: The maximum output current of 500mA may not be sufficient for high-power applications.
• Input voltage range limitation: The input voltage must be within the specified range for proper operation.

Working Principles

The S-8352C50UA-K7JT2G operates based on the principle of voltage regulation. It uses internal circuitry to maintain a stable output voltage regardless of variations in the input voltage or load conditions. By adjusting the internal feedback loop, it compensates for changes in the input voltage and ensures a consistent output voltage.

Detailed Application Field Plans

The S-8352C50UA-K7JT2G finds applications in various electronic systems, including but not limited to:

1. Portable electronic devices: Provides regulated power supply for smartphones, tablets, and portable media players.
2. IoT devices: Suitable for powering sensors, microcontrollers, and communication modules in IoT applications.
3. Automotive electronics: Used in automotive infotainment systems, GPS devices, and other onboard electronics.
4. Industrial equipment: Enables stable voltage supply in control systems, motor drives, and instrumentation devices.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-8352C50UA-K7JT2G include:

1. S-8352C33UA-K7JT2G: A voltage regulator with an output voltage of 3.3V and similar specifications.
2. S-8352C12UA-K7JT2G: A voltage regulator with an output voltage of 1.2V and similar specifications.
3. S-8352C25UA-K7JT2G: A voltage regulator with an output voltage of 2.5V and similar specifications.

These alternative models can be considered based on specific application requirements and desired output voltage levels.

(Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)