S-8259AAD-M6T1U

Product Overview

Category

The S-8259AAD-M6T1U belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for voltage detection and battery protection in various electronic devices.

Characteristics

• Voltage detection range: 2.0V to 5.0V
• Low current consumption: 1.0µA (typical)
• Overcharge detection accuracy: ±25mV (typical)
• Over-discharge detection accuracy: ±50mV (typical)
• Hysteresis voltage: 100mV (typical)
• Package type: SOT-23-6
• Essence: Battery protection and voltage monitoring

Packaging/Quantity

The S-8259AAD-M6T1U is typically packaged in reels, with 3,000 units per reel.

Specifications

The specifications of the S-8259AAD-M6T1U are as follows:

• Operating voltage range: 2.0V to 5.5V
• Overcharge detection voltage range: 2.5V to 4.5V (in 100mV steps)
• Over-discharge detection voltage range: 2.0V to 4.0V (in 100mV steps)
• Overcharge release voltage: 2.3V to 4.3V (in 100mV steps)
• Over-discharge release voltage: 2.2V to 3.9V (in 100mV steps)
• Overcurrent detection delay time: 10ms to 40ms (in 10ms steps)
• Overcurrent detection release delay time: 20ms to 80ms (in 10ms steps)

Detailed Pin Configuration

The S-8259AAD-M6T1U has the following pin configuration:

1. VDD: Power supply input
2. GND: Ground
3. OUT: Output terminal for overcharge/over-discharge detection
4. EN: Enable control input
5. OCP: Overcurrent detection output
6. N/C: No connection

Functional Features

The S-8259AAD-M6T1U offers the following functional features:

• Overcharge and over-discharge protection for batteries
• Overcurrent detection and protection
• Low current consumption for power efficiency
• Wide operating voltage range for compatibility with various devices
• Accurate voltage detection with low hysteresis

Advantages and Disadvantages

Advantages

• Provides reliable battery protection
• Low power consumption
• Accurate voltage detection
• Compact package size
• Wide operating voltage range

Disadvantages

• Limited overcharge and over-discharge detection voltage range
• Fixed delay times for overcurrent detection

Working Principles

The S-8259AAD-M6T1U works by continuously monitoring the voltage of the connected battery. It compares the battery voltage with pre-set thresholds to detect overcharge and over-discharge conditions. When an abnormal voltage level is detected, the IC triggers the appropriate protection mechanism to safeguard the battery.

Detailed Application Field Plans

The S-8259AAD-M6T1U can be used in a wide range of applications, including but not limited to:

1. Portable electronic devices (e.g., smartphones, tablets)
2. Wearable devices (e.g., smartwatches, fitness trackers)
3. Medical devices (e.g., glucose meters, portable monitors)
4. Industrial equipment (e.g., handheld tools, measurement devices)
5. Automotive electronics (e.g., electric vehicles, battery management systems)

Detailed and Complete Alternative Models

Some alternative models to the S-8259AAD-M6T1U that offer similar functionality include:

1. S-8259AAB-M6T1U
2. S-8259AAC-M6T1U
3. S-8259AAD-M6T2U
4. S-8259AAD-M6T3U

These alternative models may have slight variations in specifications and pin configurations, but they serve the same purpose of battery protection and voltage monitoring.

In conclusion, the S-8259AAD-M6T1U is a versatile integrated circuit used for voltage detection and battery protection in various electronic devices. Its compact size, low power consumption, and accurate voltage detection make it an ideal choice for applications requiring reliable battery protection.