S-80939CLNB-G69T2G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80939CLNB-G69T2G is available in a SOT-23-5 package. Each package contains one unit of the IC.
The S-80939CLNB-G69T2G has five pins arranged as follows:
```
| | --| VDD GND |-- Pin 1: Power supply (VDD) --| RESET OUT |-- Pin 2: Reset output (open drain) --| RESET IN |-- Pin 3: Reset input --| GND |-- Pin 4: Ground (GND) --| NC |-- Pin 5: No connection |___________| ```
The S-80939CLNB-G69T2G operates by comparing the input voltage (RESET IN) with an internal reference voltage. When the input voltage drops below the detection threshold, the reset output (RESET OUT) is activated, pulling it low. This signal can be used to trigger a system reset or perform other necessary actions.
The S-80939CLNB-G69T2G finds application in various electronic devices where voltage monitoring and reset functionality are required. Some potential fields of application include:
These alternative models offer similar functionality but may have variations in voltage ranges, package types, or other specifications.
Word count: 511 words
Sure! Here are 10 common questions and answers related to the application of S-80939CLNB-G69T2G in technical solutions:
1. What is the S-80939CLNB-G69T2G? - The S-80939CLNB-G69T2G is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is commonly used in various technical solutions.
2. What is the purpose of the S-80939CLNB-G69T2G? - The main purpose of this voltage detector IC is to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.
3. What are the typical applications of the S-80939CLNB-G69T2G? - This IC is often used in battery-powered devices, portable electronics, automotive systems, industrial equipment, and other applications where monitoring voltage levels is critical for proper operation.
4. What is the operating voltage range of the S-80939CLNB-G69T2G? - The operating voltage range of this IC is typically between 1.6V and 6.0V.
5. How does the S-80939CLNB-G69T2G detect voltage levels? - It uses an internal voltage reference and comparator circuitry to compare the input voltage with a preset threshold. When the voltage crosses the threshold, it triggers the output signal.
6. Can the threshold voltage be adjusted in the S-80939CLNB-G69T2G? - No, the threshold voltage is fixed and cannot be adjusted in this particular model.
7. What is the output configuration of the S-80939CLNB-G69T2G? - The output is an open-drain configuration, which means it can be connected to other devices or circuits for further processing.
8. What is the output voltage level of the S-80939CLNB-G69T2G? - The output voltage level is typically equal to the supply voltage when the input voltage is above the threshold, and it becomes low (0V) when the input voltage falls below the threshold.
9. Does the S-80939CLNB-G69T2G have any built-in delay or hysteresis? - Yes, this IC has a built-in delay of approximately 200ms and hysteresis of about 10% of the threshold voltage to prevent false triggering due to voltage fluctuations.
10. Is the S-80939CLNB-G69T2G available in different package options? - Yes, this IC is available in various package options, including SOT-23-5, SC-82AB, and USP-6C. The specific package option may vary depending on the manufacturer or distributor.
Please note that the answers provided here are general and may vary based on the specific datasheet and technical documentation of the S-80939CLNB-G69T2G.