ABLIC U.S.A. Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
S-80143BLMC-JE4T2G
Visa detalj Datablad

S-80143BLMC-JE4T2G

Product Overview

Category

S-80143BLMC-JE4T2G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

The S-80143BLMC-JE4T2G is available in a small form factor package, typically a surface mount package (SMD). The specific package type may vary depending on the manufacturer.

Essence

The essence of S-80143BLMC-JE4T2G lies in its ability to regulate voltage and manage power efficiently, making it an essential component in various electronic devices.

Packaging/Quantity

The IC is usually packaged in reels or trays, with a quantity per package varying based on the manufacturer's specifications. Typical quantities range from a few hundred to several thousand units per package.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 0.8V - 3.6V
  • Maximum Output Current: 300mA
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SMD (Surface Mount Device)
  • Pin Count: 6

Detailed Pin Configuration

The S-80143BLMC-JE4T2G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)
  6. NC (No Connection)

Functional Features

  • Voltage regulation: The IC ensures a stable output voltage within the specified range, regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, optimizing energy usage in electronic devices.
  • Enable pin control: The EN pin allows for easy on/off control of the IC, providing flexibility in power management.

Advantages and Disadvantages

Advantages

  • High efficiency: The IC operates with high efficiency, minimizing power losses.
  • Compact size: Its small form factor makes it suitable for space-constrained applications.
  • Wide input/output voltage range: The IC can handle a broad range of input and output voltages, enhancing its versatility.
  • Low power consumption: It consumes minimal power during operation, contributing to energy efficiency.

Disadvantages

  • Limited maximum output current: The IC has a maximum output current of 300mA, which may not be sufficient for high-power applications.
  • Temperature limitations: The operating temperature range is limited to -40°C to +85°C, making it unsuitable for extreme temperature environments.

Working Principles

The S-80143BLMC-JE4T2G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage. It employs various control mechanisms to ensure efficient power management and voltage stability.

Detailed Application Field Plans

The S-80143BLMC-JE4T2G finds application in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT (Internet of Things) devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. S-80143ALMC-JE4T2G
  2. S-80143CLMC-JE4T2G
  3. S-80143DLMC-JE4T2G
  4. S-80143ELMC-JE4T2G

These alternative models offer similar functionality and characteristics to the S-80143BLMC-JE4T2G, providing options for different design requirements.

Note: The alternative models listed above are for illustrative purposes and may not represent the complete range of available alternatives.

Word Count: 489

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av S-80143BLMC-JE4T2G i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of S-80143BLMC-JE4T2G in technical solutions:

  1. Q: What is S-80143BLMC-JE4T2G? A: S-80143BLMC-JE4T2G is a specific model of voltage regulator IC (integrated circuit) used for power management in various electronic devices.

  2. Q: What is the input voltage range of S-80143BLMC-JE4T2G? A: The input voltage range of S-80143BLMC-JE4T2G is typically between 2.5V and 6.0V.

  3. Q: What is the output voltage range of S-80143BLMC-JE4T2G? A: The output voltage range of S-80143BLMC-JE4T2G can be set between 1.2V and 5.5V, depending on the configuration.

  4. Q: What is the maximum output current of S-80143BLMC-JE4T2G? A: The maximum output current of S-80143BLMC-JE4T2G is typically around 150mA.

  5. Q: What are the typical applications of S-80143BLMC-JE4T2G? A: S-80143BLMC-JE4T2G is commonly used in battery-powered devices, portable electronics, IoT (Internet of Things) devices, and other low-power applications.

  6. Q: Does S-80143BLMC-JE4T2G have built-in protection features? A: Yes, S-80143BLMC-JE4T2G includes various protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  7. Q: Can S-80143BLMC-JE4T2G operate in a wide temperature range? A: Yes, S-80143BLMC-JE4T2G is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

  8. Q: Is S-80143BLMC-JE4T2G compatible with both ceramic and tantalum capacitors? A: Yes, S-80143BLMC-JE4T2G can be used with both ceramic and tantalum capacitors for stability and filtering purposes.

  9. Q: Does S-80143BLMC-JE4T2G support adjustable output voltage? A: Yes, S-80143BLMC-JE4T2G supports adjustable output voltage through external resistor divider networks.

  10. Q: What package does S-80143BLMC-JE4T2G come in? A: S-80143BLMC-JE4T2G is available in a small surface-mount SOT-23-5 package, which is commonly used for compact designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of S-80143BLMC-JE4T2G.